http://wiki.cchtml.com/api.php?action=feedcontributions&user=74.208.11.169&feedformat=atomcchtml.com - User contributions [en]2024-03-28T13:40:50ZUser contributionsMediaWiki 1.39.4http://wiki.cchtml.com/index.php?title=Frequently_Asked_Questions&diff=892Frequently Asked Questions2007-11-09T19:13:37Z<p>74.208.11.169: </p>
<hr />
<div>cvielt<br />
vartroct<br />
bocric<br />
==Installation==<br />
===How do I know fglrx is installed correctly?===<br />
There are several ways to check if fglrx is loaded and running.<br />
<br>1. Check your X.org or XFree86 log. You should see "DRI Initialization Successful."<br />
# less /var/log/Xorg.0.log<br />
or<br />
# less /var/log/XFree86.0.log<br />
2. Check glxinfo. You should see "direct" and not "indirect."<br />
# glxinfo | grep direct<br />
3. Check your kernel log. You should see fglrx messages near the bottom.<br />
# dmesg<br />
4. Check your modules. You should see fglrx loaded.<br />
# lsmod | grep fglrx<br />
*NOTE: [[Glxgears is not a Benchmark|glxgears]] is not a definite way of checking the installation of fglrx.<br />
<br />
=== Is the rebooting really necessary? ===<br />
<br />
No.<br />
<br />
However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.<br />
<br />
==Kernel==<br />
===Why does fglrx not work for my bleeding-edge kernel?===<br />
The development process of the fglrx driver and the Linux kernel are not on the same level. The fglrx driver requires some special interactions with the kernel memory API and these tend to change between kernel versions. <br />
<br />
There is also an 11-12 week cycle required to develop, validate and test each release of an ATI driver <ref>http://www.phoronix.com/scan.php?page=article&item=735&num=1</ref>. ATI will only look to support the latest kernel that is officially out (no -rc or -git releases are supported) at the time they release a driver. Example: fglrx version A comes out Monday, but kernel version B comes out Tuesday. Kernel version B is not supported by fglrx version A. (but might be able to work anyway by doing a 'modprobe -f fglrx' in a shell)<br />
<br />
The binary part of ATI's kernel module has no explicit dependency on the Linux kernel. There are a set of source files that provide the glue to the kernel. This is where the dependency to different kernels exist. As a result, user contributed patches for newer kernels can often be found by searching [http://ati.cchtml.com Bugzilla].<br />
<br />
==X Configuration==<br />
===How do I configure my system to use the fglrx driver?===<br />
*ati-xconfig<br />
:Command line program to modify the /etc/X11/xorg.conf file.<br />
*amdcccle<br />
:GUI program that allows detailed configuration over the driver's controls.<br />
<br />
==Troubleshooting==<br />
* See [[Troubleshooting]] page.<br />
<br />
==See Also==<br />
*[http://ati.amd.com/products/catalyst/linux.html Official ATI Linux Driver FAQ]<br />
<br />
==References==<br />
<references/></div>74.208.11.169http://wiki.cchtml.com/index.php?title=Category:Distributions&diff=358Category:Distributions2007-11-09T15:26:31Z<p>74.208.11.169: </p>
<hr />
<div>ractrocolo<br />
The list of GNU/Linux flavors that are documented for the ATI Linux driver.<br />
<br />
Although ATI can only actively support a small number of distributions, distribution vendors are encouraged to work with ATI to ensure that native packages can be created for their distribution. The current actively supported distributions are the '''Red Hat Enterprise Linux''' and '''Novell/SuSE''' suite of products.<br />
<br />
Also note that the End User License Agreement explicitly provides for repackaging and redistribution of ATI's drivers. If your favourite distribution is not listed below, please work with them to contact ATI and either get support in the installer, or natively in the distribution.</div>74.208.11.169http://wiki.cchtml.com/index.php?title=8.23.7&diff=19988.23.72007-11-09T15:26:27Z<p>74.208.11.169: </p>
<hr />
<div>chichilie<br />
32-bit [https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.23.7-i386.run Download]<br />
<br />
64-bit [https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/64bit/ati-driver-installer-8.23.7-x86_64.run Download]<br />
<br />
==New Features==<br />
<br />
=== New Product Support ===<br />
<br />
This release of the ATI Proprietary Linux driver introduces support for the following ATI AGP products: <br />
*ATI Radeon® X850 XT Platinum Edition <br />
*ATI Radeon® X850 XT <br />
*ATI Radeon® X850 SE <br />
*ATI Radeon® X850 PRO <br />
*ATI Radeon® X800 SE <br />
*ATI Radeon® X800 VE <br />
*ATI Radeon® X800 GT <br />
*ATI Radeon® X800 GTO <br />
*ATI Mobility⢠Radeon® X800 <br />
<br />
=== OpenGL 2.0 Enhancement ===<br />
<br />
This release of the ATI Proprietary Linux driver provides support for applications utilizing OpenGL Extension Wrangler (GLEW) Library. GLEW has a run-time mechanism that determines which OpenGL extensions are supported on a target platform. <br />
<br />
=== Full Scene Anti-Aliasing Support ===<br />
<br />
This release of the ATI Proprietary Linux driver now provides Full Scene Anti-Aliasing (FSAA) support on all ATI Radeon® 9500 and above. FSAA is enabled through aticonfig. Information on this feature can be found executing the command aticonfig --help. <br />
<br />
==Known Issues==<br />
*Attempting to install the driver on distributions that have updated certain 3D components outside of the stock XOrg 6.8.2 may result in the driver not initializing 3D applications properly.<br />
*TV Display is Corrupt After Switching Resolutions.<br />
*Running two X servers simultaneously results in the system failing to respond.<br />
<br />
[[Category:Releases]]</div>74.208.11.169http://wiki.cchtml.com/index.php?title=Category:NeedsUpdating&diff=1547Category:NeedsUpdating2007-11-09T15:21:53Z<p>74.208.11.169: </p>
<hr />
<div>liacelouc4t<br />
Here is your opportunity to support this site. Any of the linked pages below need updating. Please update and remove the NeedsUpdating flag.</div>74.208.11.169http://wiki.cchtml.com/index.php?title=Frequently_Asked_Questions&diff=891Frequently Asked Questions2007-11-09T15:07:06Z<p>74.208.11.169: </p>
<hr />
<div>vartroct<br />
bocric<br />
==Installation==<br />
===How do I know fglrx is installed correctly?===<br />
There are several ways to check if fglrx is loaded and running.<br />
<br>1. Check your X.org or XFree86 log. You should see "DRI Initialization Successful."<br />
# less /var/log/Xorg.0.log<br />
or<br />
# less /var/log/XFree86.0.log<br />
2. Check glxinfo. You should see "direct" and not "indirect."<br />
# glxinfo | grep direct<br />
3. Check your kernel log. You should see fglrx messages near the bottom.<br />
# dmesg<br />
4. Check your modules. You should see fglrx loaded.<br />
# lsmod | grep fglrx<br />
*NOTE: [[Glxgears is not a Benchmark|glxgears]] is not a definite way of checking the installation of fglrx.<br />
<br />
=== Is the rebooting really necessary? ===<br />
<br />
No.<br />
<br />
However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.<br />
<br />
==Kernel==<br />
===Why does fglrx not work for my bleeding-edge kernel?===<br />
The development process of the fglrx driver and the Linux kernel are not on the same level. The fglrx driver requires some special interactions with the kernel memory API and these tend to change between kernel versions. <br />
<br />
There is also an 11-12 week cycle required to develop, validate and test each release of an ATI driver <ref>http://www.phoronix.com/scan.php?page=article&item=735&num=1</ref>. ATI will only look to support the latest kernel that is officially out (no -rc or -git releases are supported) at the time they release a driver. Example: fglrx version A comes out Monday, but kernel version B comes out Tuesday. Kernel version B is not supported by fglrx version A. (but might be able to work anyway by doing a 'modprobe -f fglrx' in a shell)<br />
<br />
The binary part of ATI's kernel module has no explicit dependency on the Linux kernel. There are a set of source files that provide the glue to the kernel. This is where the dependency to different kernels exist. As a result, user contributed patches for newer kernels can often be found by searching [http://ati.cchtml.com Bugzilla].<br />
<br />
==X Configuration==<br />
===How do I configure my system to use the fglrx driver?===<br />
*ati-xconfig<br />
:Command line program to modify the /etc/X11/xorg.conf file.<br />
*amdcccle<br />
:GUI program that allows detailed configuration over the driver's controls.<br />
<br />
==Troubleshooting==<br />
* See [[Troubleshooting]] page.<br />
<br />
==See Also==<br />
*[http://ati.amd.com/products/catalyst/linux.html Official ATI Linux Driver FAQ]<br />
<br />
==References==<br />
<references/></div>74.208.11.169