Debian: Difference between revisions

From cchtml.com
(TaMrXbdHadVatFMMKGY)
Line 1: Line 1:
= Read Me First =
Hi there,Guys, just wanted to post that I am now on linux after 15 years of NT to Vista. Vista made me think about what was going on in the cotmnuimy land.All I can say is thank you    it is now a tough learning curve, but worth the effort and the OS is so enjoyable.I have ATI driver issues   and i will read and get ti sorted..Anyway,Hopefully I can contribute at as later date.Brebo
 
'''Which cards are no longer supported by ATI Catalyst?'''
The ATI Radeon 9500-9800, Xpress200-1250, 690G, 740G, X300-X2500 (including Mobility RadeonHD 2300, since it is really a DirectX 9 part).  See the complete list [http://wiki.cchtml.com/index.php/9.4 here.]
If your card is on that list, you are limited to open-source drivers on Debian Squeeze/6.0 (and later). If you really need the proprietary Catalyst/fglrx driver, you will have to use Debian Lenny/5.0.x and install Catalyst 9-3.
{| WIDTH="650" cellpadding=0 cellspacing=0 style="background-color: red; border: solid 1px #666666; color: #ffffff; text-align: center;"
| style="background-color: #666666; border: solid 1px #666666; border-bottom: 1px solid #888;" | <font size="-1">'''ATTENTION RADEON USERS'''</font>
|-
| <br />NOTE: If you enter your card information on AMD/ATI's driver page, it will offer you the Catalyst 9-3 driver to download. However, the Catalyst 9-3 driver doesn't support X servers past 1.5, and it will not work with Debian versions later than  Lenny/5.0.x! !!!SO BE CAREFUL!!! If you tried to install Catalyst on a system with one of these cards, see the 'Removing the Driver' section to restore the default/pre-installed drivers.<br /><br />
|}
 
= Read Me Second :SLEEP mode  in Debian/testing kernel 3.2.0 =
 
amd-driver-installer-catalyst-12.10-x86.x86_64.run breaks sleeping mode(notebook hangs up after awaking and reboot without logging anything ). I suppose it is because atievetsd not working correctly. So i first install last fglrx-atieventsd packet and over it amd-driver-installer-catalyst-12.10-x86.x86_64.run. ( Or first
amd-driver-installer-catalyst-12.10-x86.x86_64.run and then manualy copy rest conf files from fglrx-atieventsd
without overwriting.) Then start atieventsd :  "service fglrx-atieventsd restart" and put this command  in
autorun files.
 
Next step - check /var/syslog if there would be "atieventsd[3141]: Unable to bind control socket to
/var/run/atieventsd.socket: Permission denied " - then it need be run by root.
 
After this sleeping mode become work correctly  but only sometimes. Research is to be continued.
Good news is that many 3d games are well playing with sound on wine-1.5.6.
 
UPDATE:
It seems it works correctly. Clean install amd-driver-installer-catalyst-12.10-x86.x86_64.run on Debian/testing kernel 3.2.0 i386.
But after upgrading libxi6 to stable version (apt-get install -t stable libxi6).
Old version have made problems with wine games , something like "malloc() corruption memory" and segfault.
New version amd-driver-installer-catalyst-13.1-linux-x86.x86_64.run and fglrx-driver_12-6+point-1_i386.deb i havenot test.
 
= Installation =
 
The open-source ati/radeon driver should already be installed and used as the default.
See [[Debian Open Source|Debian Open Source Drivers]].
This guide focuses on installing the proprietary ATI driver (fglrx/Catalyst).
 
==Before Starting==
If you have previously attempted installing Catalyst, remove any leftover files by following the [[#Removing_Catalyst.2Ffglrx| Removing the Driver]] section.
 
 
== Installing from Debian Repository ==
 
NOTE: This no longer works on Wheezy/testing or Sid after upgrade to Xserver 1.12. Unfortunately fglrx/Catalyst trigger segfaults in Xorg newer than 1.11.x, and the driver was removed from Wheezy and Sid.
 
Fglrx is non-free software, so it is located in the non-free repository. If you do not have non-free enabled, you can do so like this: http://serverfault.com/questions/240920/how-do-i-enable-non-free-packages-on-debian
 
$ sudo apt-get remove --purge xserver-xorg-video-radeon
$ sudo apt-get install fglrx-driver fglrx-control fglrx-glx fglrx-atieventsd fglrx-modules-dkms
 
If you are using 64-bit Debian, install the 32-bit fglrx libraries for use with 32-bit programs.
 
$ sudo apt-get install fglrx-glx-ia32
 
The Debian community provides information on its wiki pages [http://wiki.debian.org/ATIProprietary here] and [http://wiki.debian.org/ATIStream here].
 
== Installing Manually ==
This [[can not]] work at all. please refer the Discussion for details....
 
This method uses the latest Catalyst driver downloaded from AMD/ATI's site.
 
===Prerequisite Packages===
Install the prerequisite packages (names are based on Debian sid, older Debians may be different):
$ sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++6 dkms libqtgui4 wget execstack libelfg0 module-assistant dh-modaliases
''If you are using the x86_64 architecture (64 bit), be sure to install "ia32-libs" before proceeding!''
$ sudo apt-get install ia32-libs
 
===Download the latest Catalyst package.===
This package contains both the 32-bit and 64-bit driver.
$ cd ~/; mkdir catalyst{{Catalystversion}}; cd catalyst{{Catalystversion}}/
$ wget <nowiki>http://www2.ati.com/drivers/linux/amd-</nowiki>{{Catalystdashversion}}-linux-x86.x86_64.zip
$ unzip amd-{{Catalystdashversion}}-linux-x86.x86_64.zip
$ chmod +x amd-{{Catalystdashversion}}-linux-x86.x86_64.run
 
===Create .deb packages.===
You can run <code>./amd-{{Catalystdashversion}}-linux-x86.x86_64.run --listpkg</code> to get a list of all the potential packages
 
For Debian systems, <package> will be one of the following: 
Debian/sid  Debian/unstable Debian/etch Debian/stable Debian/lenny Debian/testing  Debian/experimental
$ fakeroot sh amd-{{Catalystdashversion}}-linux-x86.x86_64.run --buildpkg <package>
 
===''Install .debs.''===
$ sudo dpkg -i fglrx*.deb
 
== Wheezy Installation (current as of May 3, 2013) ==
 
Wheezy upgraded from xserver 1.11 to 1.12 on May 20, 2012.  AMD has not updated their driver to work with this version of xserver.  So, you have two options:
 
1) Downgrade from xserver 1.12 (Tested, and works on Debian Wheezy kernel 3.2.0-4-amd64 (05/03/13) and on Debian Wheezy kernel 3.2.0-1-amd64 (6/22/12) )
 
Link to instructions (this should be copied over to this wiki for posterity):
  https://www.linuxquestions.org/questions/linux-hardware-18/how-do-i-get-my-fglrx-driver-back-946102/#post4684285.
 
Note 1:
In the linked directions they use fglrx version 12.4.  At the time of making this edit beta version 12.6 also works just fine.  If you want to run the bleeding edge, it can be found here: http://support.amd.com/us/gpudownload/linux/Pages/radeon_linux.aspx?type=2.4.1&product=2.4.1.3.42&lang=English 
With the 12.6 beta version you will get a watermark in the lower right hand corner.  After you have everything working properly run this script: http://www.areyoueye.net/scripts/watermark_nix.sh  It will get rid of that water mark.
 
Note 2:
fglrx version 13.4 works just fine except changing the brighntess because it stays full all the time. Installing this driver will not show up the watermark
 
2) Patch libpciaccess (I have no first hand knowledge of this working but others swear by it)
 
This will get you the latest and greatest xserver and fglrx working together.
 
Read this: http://ati.cchtml.com/show_bug.cgi?id=522
Apply this patch: http://pastebin.com/swpDj4FD
 
= Post Install =
 
==Generate a new /etc/X11/xorg.conf file==
 
Unfortunately, there is no sure way to generate the ATI version of the Xorg.conf file.  It is entirely dependent on your configuration. The following subsections will attempt to address possible (and tested) variations for their respective configurations.
 
=== Generic Config ===
This will work for most people:
$ sudo amdconfig --initial -f
 
If you are using dual head, that is to say, two _different_ desktops on two monitors, do this:
$ sudo amdconfig --initial=dual-head -f
 
Most people with two or more monitors will want instead one large desktop; to do this you may
have to specify your monitors individually in the xorg.conf file and tell the driver to use a
larger desktop size (big enough to contain both monitors) then use xrandr to configure the
monitor arrangement.
 
=== Minimal Config ===
A very basic /etc/X11/xorg.conf file might be what you need if you have a new card that's not fully supported by amdconfig. Here follows the entirety of a minimal xorg.conf file for the Radeon 6870:
 
Section "Device"
  Identifier "ATI radeon 6870"
  Driver "fglrx"
EndSection
 
=== X2/Dual GPU Cards ===
If you have an X2 card (e.g. 4870X2 or 5970), use... !!Do not use for two separate cards in crossfire!!
$ sudo amdconfig --initial -f --adapter<nowiki>=</nowiki>all
 
=== Dual/Multi Monitors ===
 
A post at http://phoronix.com/forums/showthread.php?t=18553 suggested to do the following
to use a dual monitor display (also known as "Big Desktop"):
$ sudo amdconfig --initial -f
$ sudo amdconfig --set-pcs-str<nowiki>=</nowiki>"DDX,EnableRandR12,FALSE"
 
However the information is dated 2009 and now believed to be obsolete.
 
For multiple monitors, instead try specifying all monitors in your xorg.conf file.
Use the following as a starting point:
 
  Section "ServerLayout"
        Identifier      "amdconfig Layout"
        Screen        0  "amdconfig-Screen[0]-0" 0 0
  EndSection
 
  Section "Module"
  EndSection
 
  Section "Monitor"
        Identifier      "0-DFP6"
        Option          "DPMS"          "true"
        Option          "PreferredMode" "1920x1080"
  EndSection
 
  Section "Monitor"
        Identifier      "0-CRT1"
        Option          "DPMS"          "true"
        Option          "PreferredMode" "1280x1024"
  EndSection
 
  Section "Device"
        Identifier      "amdconfig-Device[0]-0"
        Driver          "fglrx"
        BusID            "PCI:1:0:0"
        Option          "Monitor-DFP6"  "0-DFP6"
        Option          "Monitor-CRT1"  "0-CRT1"
  EndSection
 
  Section "Screen"
        Identifier      "amdconfig-Screen[0]-0"
        Device          "amdconfig-Device[0]-0"
        Monitor          "0-DFP6"
        DefaultDepth    24
 
        SubSection "Display"
            Viewport    0 0
            Depth        24
            # Big Desktop: 1920+1280=3200, max(1080,1024)=1080
            Virtual      3200 1080
        EndSubSection
 
  EndSection
 
After starting X successfully, use <nowiki>xrandr</nowiki> to check the maximum screen size
is large enough for your combined desktop:
 
$ xrandr
Screen 0: minimum 320 x 200, current 3200 x 1080, maximum 3200 x 1080
 
And positioning of connected monitors:
 
DFP1 disconnected (normal left inverted right x axis y axis)
DFP2 disconnected (normal left inverted right x axis y axis)
DFP3 disconnected (normal left inverted right x axis y axis)
DFP4 disconnected (normal left inverted right x axis y axis)
DFP5 disconnected (normal left inverted right x axis y axis)
DFP6 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
[modes elided]
CRT1 connected 1280x1024+1920+56 (normal left inverted right x axis y axis) 338mm x 270mm
 
Use xrandr (or in KDE, krandrtray) to reposition your monitors within your screen.
 
==Force use of the new xorg.conf (if necessary)==
Some people find that changes to xorg.conf don't get used by the driver. To force the ATI driver to adopt changes made to xorg.conf, use the following command:
 
$ sudo amdconfig <nowiki>--input=/etc/X11/xorg.conf --tls=1</nowiki>
 
==Test your installation==
NOTE: if you don't reboot first, fglrxinfo gives an error message.
Reboot the computer and type
$ fglrxinfo
into the terminal. If the vendor string contains ATI, you have installed the driver successfully. Using fglrxinfo on a system with Catalyst 11-4 and a RadeonHD 4250 returns:
<pre>
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 4200 Series (This line may be different depending on what graphics card you are using.)
OpenGL version string: 3.3.10665 Compatibility Profile Context (This line may be different depending on what graphics card and
Catalyst version you are using.)
</pre>
Now, try:
$ fgl_glxgears
If you experience issues or a hang, you may need to disable fast TLS.
$ sudo amdconfig --tls=0
 
= Hardware Video Decode Acceleration (EXPERIMENTAL) =
This is confirmed to work for newer RadeonHD GPU's (those with UVD2). If you have a RadeonHD 4000 series or newer, you have UVD2. To see the complete list: http://en.wikipedia.org/wiki/Unified_Video_Decoder#UVD_enabled_GPUs
== Debian wheezy/7.0 and Later ==
$ sudo apt-get install xvba-va-driver
 
=Updating Catalyst/fglrx=
 
DO NOT try to install a new version over an old one. Follow the [[#Removing_Catalyst.2Ffglrx| Removing the Driver]] section below to remove your existing driver.
 
=Removing Catalyst/fglrx=
The uninstall script in the first command will only exist if you downloaded the drivers and installed them directly (rather than building packages as this guide does). Skip the first command if it does not exist.
$ sudo sh /usr/share/ati/fglrx-uninstall.sh
$ sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev* xorg-driver-fglrx
 
If you plan on using open-source drivers, you will need to reinstall some packages because Catalyst overwrites or diverts some key 3D libraries with proprietary versions. For more information on this issue, see [https://wiki.ubuntu.com/X/Troubleshooting/FglrxInteferesWithRadeonDriver this Ubuntu wiki page]
$ sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
$ sudo apt-get install xserver-xorg-video-ati
$ sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core
$ sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
 
=Catalyst 11.9 and Debian Squeeze x86_64 (October 2011)=
Version 11.9 will not install on Debian Squeeze with Kernel >= 3.1. To fix and install proceed as follows.
First uninstall all versions of fglrx you can find, see above. (!!)
 
Download the driver and extract it thusly:
$ sudo ./ati-driver-installer-11-9-x86.x86_64.run --keep
Enter the newly created directory (will be named fglrx-install.XXXXXX).
Use a hexeditor to find bytes starting at A6B0 with the values <nowiki>e8 53 90 ff ff</nowiki> and replace them with <nowiki>90 90 90 90 90</nowiki>.
This replaces a faulty free-op with 5 no-ops and fixes the exception thrown by "setup.data/bin/x86_64/setup".
Read up on this at <nowiki>http://disbauxes.upc.es/?p=2964</nowiki> .
 
Now the kernel-build-environment for the 3.1 kernel is currently missing in the repositories. To get around that type:
$ sudo aptitude install linux-source-3.1.0-rc7
$ cd /usr/src;tar -xjf linux-source-3.1.0-rc7;ln -s linux-source-3.1.0-rc7 linux;cd linux;
You may need to append an "-amd64" (or similar) to the localversion of the source to have its version-string match the one of the running kernel.
To do so open .config in the current dir with an editor and search for "LOCALVERSION", set that var to "-amd64" or similar.
Configure the kernel using
$ sudo make oldconfig
and build it using
$ make-kpkg --initrd --append-to-version="-myversion" kernel_image kernel_headers modules_image
You may not need to rebuild the whole kernel, installing its headers may be enough,
but i wanted a fresh kernel with a few custom options.
Install your kernel (or just the headers) from the .deb-files that were created by make-kpkg in the directory above.
 
After this return to the directory where you extracted the driver to and type:
$ sudo ./amd-installer.sh 8.892 --install --force
 
To load the driver type:
$ sudo modprobe fglrx
 
=Debian Squeeze x86_64 and AMD A Series (June 2012)=
 
First install Kernel 3.2 from squeeze-backports.
Add backports to your sources.list
Add this line
deb http://backports.debian.org/debian-backports squeeze-backports main contrib non-free
 
to your sources.list (or add a new file to /etc/apt/sources.list.d/)
$ sudo apt-get update
$ sudo apt-get -t squeeze-backports install linux-image-3.2.0-0.bpo.2-amd64
 
$ sudo reboot
 
$ sudo apt-get remove --purge xserver-xorg-video-radeon
$ sudo apt-get -t squeeze-backports install fglrx-driver fglrx-control fglrx-glx fglrx-atieventsd fglrx-modules-dkms
 
If you are using 64-bit Debian, install the 32-bit fglrx libraries for use with 32-bit programs.
 
$ sudo apt-get -t squeeze-backports install fglrx-glx-ia32
 
[[Category:Distributions]]

Revision as of 16:33, 4 July 2013

Hi there,Guys, just wanted to post that I am now on linux after 15 years of NT to Vista. Vista made me think about what was going on in the cotmnuimy land.All I can say is thank you it is now a tough learning curve, but worth the effort and the OS is so enjoyable.I have ATI driver issues and i will read and get ti sorted..Anyway,Hopefully I can contribute at as later date.Brebo