Fedora 16 Installation Guide
- 1 Installing the Official AMD driver
- 1.1 Requirements
- 1.2 Pre-built packages from RPMFusion
- 1.3 Official AMD Driver
- 2 Troubleshooting
Installing the Official AMD driver
The AMD-supplied driver will work best in most cases if there is no xorg.conf file present before you begin the installation process. Move any existing xorg.conf files out of the /etc/X11 directory before installation.
You will need version 11.11 of the ATI driver or later for Fedora 16, earlier versions will not work with the version of XOrg that F16 ships with.
You require a Radeon HD2000 series or better to use the latest AMD-supplied driver.
Compilation Problems on x86_64 Fedora 16
Due to an upstream sourcecode change in the Fedora kernel-headers package, building of AMD's fglrx module will currently fail with kernels 3.2.9-2.fc16 and later.
To fix this, we can revert a small edit. Open the file /usr/src/kernels/`uname -r`/arch/x86/include/asm/uaccess_64.h in a text editor.
On line 56 and 57 you will see:
else WARN(1, "Buffer overflow detected!\n");
Comment this out so it reads:
// else // WARN(1, "Buffer overflow detected!\n");
Your AMD kernel module will now build correctly. You may have to reboot into the new kernel and force the module rebuild with
su - akmods --force
then reboot again.
Compilation Problems on i686 Fedora 16
The following is a procedure that has been confirmed to work with i686 Fedora users. If you are getting the following message in your fglrx-install.log:
[Message] Kernel Module : Found kernel module build environment, generating kernel module now. AMD kernel module generator version 2.1 doing Makefile based build for kernel 2.6.x and higher rm -rf *.c *.h *.o *.ko *.a .??* *.symvers make -C /lib/modules/3.2.9-1.fc16.i686/build SUBDIRS=/lib/modules/fglrx/build_mod/2.6.x modules make: Entering directory `/usr/src/kernels/3.2.9-1.fc16.i686' CC [M] /lib/modules/fglrx/build_mod/2.6.x/firegl_public.o /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function ‘KCL_fpu_begin’: /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:5804:28: error: ‘TS_USEDFPU’ undeclared (first use in this function) /lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:5804:28: note: each undeclared identifier is reported only once for each function it appears in make: *** [/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o] Error 1 make: *** [_module_/lib/modules/fglrx/build_mod/2.6.x] Error 2 make: Leaving directory `/usr/src/kernels/3.2.9-1.fc16.i686' make: *** [kmod_build] Error 2 build failed with return value 2 [Error] Kernel Module : Failed to compile kernel module - please consult readme. [Reboot] Kernel Module : dracut
Then the following procedure should work for you.
Procedure is as follows:
1) Extract amd-driver-installer into subdir. Example:
chmod 700 amd-driver-installer-12-2-x86.x86_64.run ./amd-driver-installer-12-2-x86.x86_64.run --extract fgrlx-12.2
2) cd into directory containing firegl_public.c. i.e.,
3) In that dir, save the following code to a file named "fglrx.patch":
fixed fgrlx compilation error on 32-bit x86 arch with kernel 3.3-rc4 due to commit: https://github.com/torvalds/linux/commit/f94edacf998516ac9d849f7bc6949a703977a7f3 later modified (in 3.3-rc5) by commit: https://github.com/torvalds/linux/commit/7e16838d94b566a17b65231073d179bc04d590c8#diff-1 and finally backported to kernel 3.2.8. Signed-off-by: Gianluca Gennari <email@example.com> --- firegl_public.c | 6 ++++++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/firegl_public.c b/firegl_public.c index 6e0aa82..cb9e217 100644 --- a/firegl_public.c +++ b/firegl_public.c @@ -5797,10 +5797,16 @@ void ATI_API_CALL KCL_fpu_begin(void) #ifdef CONFIG_X86_64 kernel_fpu_begin(); #else +#ifndef TS_USEDFPU + preempt_disable(); + if (__thread_has_fpu(current)) + __save_init_fpu(current); +#else struct thread_info *cur_task = current_thread_info(); preempt_disable(); if (cur_task->status & TS_USEDFPU) __save_init_fpu(cur_task->task); +#endif else clts(); #endif -- 220.127.116.11
4) Run the patch on firegl_public.c :
su- patch -p1 < ~/fglrx.patch
5) From the extraction subdir (in this case "fgrlx-12.2"), run ati-installer.sh as follows:
su - /bin/sh ./ati-installer.sh 8.95 --install
- Reference: http://phoronix.com/forums/showthread.php?68922-Patch-to-compile-fgrlx-module-on-Linux-3-3-rc4-with-x86-32-bit-arch
Multiple Monitor Setups
If you have an existing multiple monitor setup, move your existing xorg.conf to a safe place. Let the amd-driver-installer generate a fresh working xorg.conf file for you based on what it probes from EDID monitor info, If you are having difficulties after generating a new xorg.conf, use your old xorg.conf as a reference and transfer sections of that file as needed to the new one.
Here are some resources for those having difficulty getting their multiple monitors running:
- aticonfig --help
- One of the Ubuntu guides on this Wiki.
- AMD's own Catalyst documentation
If you need to start with a clean slate and all your monitors are connected, you can force a fresh xorg.conf to be generated taking into account the monitors present:
su - aticonfig --initial -f
Pre-built packages from RPMFusion
This is easier than manually building the driver from AMD as you don't need to worry about passing kernel options via GRUB2, configuring DKMS, rebuilding the kernel module every time you do a kernel upgrade, or cleaning up any mess if you want to remove the driver.
Clean up previous Offical AMD driver installation
If you're coming from the Official AMD driver to RPMFusion's AMD driver, you'll need to reinstall the mesa-libGL package as the Official AMD driver installation changes files it contains.
su - yum reinstall mesa-libGL
There are instructions on http://www.rpmfusion.org/ but this should do it.
su - rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Install Catalyst driver packages
This procedure is the same for 32-bit and 64-bit, yum will automatically install the correct driver and libs for your architecture.
su - yum install akmod-catalyst xorg-x11-drv-catalyst xorg-x11-drv-catalyst-libs
32-bit Libraries on 64-bit OS
If you want to play 32-bit games on a 64-bit Fedora installation, you will need to install the 32-bit libraries in addition to the above step.
su - yum install xorg-x11-drv-catalyst-libs.i686
Kernel module packages
Note that there are individual kmod-catalyst- packages in RPMFusion which supply kernel modules for specific Fedora kernel versions. If you use these and you upgrade the kernel without upgrading the kmod-catalyst- package, loading the proprietary driver will fail and you'll revert back to the Free radeon graphics driver. Sometimes there is a day or so between Fedora upgrading their kernel and RPMFusion building a new kmod-catalyst- package.
The akmod-catalyst package we installed above automatically builds a new kernel module at boot-time when the kernel is upgraded, so you'll never have to worry about this.
Official AMD Driver
Preinstall required packages
The script from AMD builds the kernel module and a set of modules for XOrg. The Official AMD installer requires some development packages to be installed:
su - yum install kernel-devel kernel-headers gcc gcc-c++
We'll also want to remove any kernel-devel packages from old versions of the kernel. Check your current kernel version with:
Check all installed kernel packages with
su - rpm -qa | grep kernel
Remove any kernel-devel packages which do not match the latest kernel version. For example:
su - yum remove kernel-devel-3.2.9-1.fc16.x86_64
Note we are careful to specify the exact package name that was given to us by the rpm command above.
Boot into the latest kernel before continuing. Building the module on a kernel which you don't have -devel packages for will fail. Building the module on one kernel then booting into another will result in the compiled module not working.
Download the driver for your particular card from http://support.amd.com/
It will look similar to: amd-driver-installer-XX-X-XXX.XXX_XX.run.
Run the file as root in the sh shell.
su - chmod +x amd-driver-installer-XX-X-XXX.XXX_XX.run sh ./amd-driver-installer-XX-X-XXX.XXX_XX.run
Select the default install, do not generate distribution packages.
Check the build install log:
You should see data confirming the module build worked:
build succeeded with return value 0 duplicating results into driver repository... done.
Uninstalling Official AMD driver
Run AMD's uninstall script:
su - sh /usr/share/ati/fglrx-uninstall.sh
The following steps are not strictly required because the amd-driver-installer is written to put all files back as they were before the install. One set of files that amd-driver-installer alters is the mesa library set. To be sure of a mint-condition installation (especially if you are upgrading to the next Official driver version) reinstall the following package:
su - yum reinstall mesa-libGL
For those running Wine or Crossover from Codeweavers.com, the following command will reinstall all the mesa libraries that (should) be on your system. This example is for users running Wine/Crossover on a 64 bit system:
su - yum reinstall mesa-dri-filesystem.i686 mesa-libGL.x86_64 mesa-dri-drivers.x86_64 mesa-libGL.i686 mesa-dri-filesystem.x86_64 mesa-libEGL.x86_64 mesa-dri-drivers.i686 mesa-libGLU.x86_64
In the event you install the driver and are greeted with a blank screen or corrupted video signal when starting X, you are able to manually disable the Free Software radeon driver to troubleshoot.
Turn your system off and on again. On the GRUB boot screen, press e to edit the default boot entry, scroll down to the kernel line (which begins linux), then press e again to edit the line.
Add the entries radeon.modeset=0 blacklist=radeon to the end. For example, if your kernel line is
linux /vmlinuz-3.2.9-1.fc16.x86_64 LANG=en_US.UTF-8
we'll want to edit it so it is
linux /vmlinuz-3.2.9-1.fc16.x86_64 LANG=en_US.UTF-8 radeon.modeset=0 rdblacklist=radeon blacklist=radeon
These entries do the following:
- radeon.modeset=0 disables "Kernel Mode Settting" for the Free Software driver (ie: the driver telling the kernel to setup the screen resolution, instead of XOrg doing it)
- rdblacklist=radeon blacklist=radeon stops the kernel from loading the Free Software radeon driver altogether
From here you can manually remove and reinstall the proprietary drivers, either with yum or with PackageKit's Add/Remove Software application, as desired.