Difference between revisions of "Fedora 17 Installation Guide"

From cchtml.com
Jump to: navigation, search
Line 17: Line 17:
 
You may also need libxcb.i686 from the Fedora 16 release. The intel driver has additional dependencies, and those with AMD/ATi cards don't need it anyway.
 
You may also need libxcb.i686 from the Fedora 16 release. The intel driver has additional dependencies, and those with AMD/ATi cards don't need it anyway.
 
To solve the issues with the new kernel source, use the steps in <ul><li>[[Fedora 16 Installation Guide]]</li></ul>
 
To solve the issues with the new kernel source, use the steps in <ul><li>[[Fedora 16 Installation Guide]]</li></ul>
A long term problem that can crop up because of the use of old packages is that whenever you go to update, yum will attempt to overwrite them. To solve this, add the following line to your <code>/etc/yum.conf</code> file.
+
<b>UPDATE</b><br>
<pre>exclude=xorg* xcb-util startup-notification*</pre>
+
3.4.0 has been pushed as the most recent kernel update. This will require recompiling the drivers in addition to commenting the two lines out of <code>uaccess_64.h</code>. Make sure you've rebooted into the new kernel before compiling the driver. To compile go to the directory where the <code>amd-driver-installer-12-4-x86.x86_64.run</code> file is and type:
 +
<pre>./amd-driver-installer-12-4-x86.x86_64.run --extract fglrx</pre>
 +
You will then need to edit <code>./fglrx/common/lib/modules/fglrx/build_mod/kcl_ioctl.c</code> and add the line <pre>DEFINE_PER_CPU(unsigned long, old_rsp);</pre> on line <code>220</code> directly under the end of the multi-line comment. You also need to edit line <code>4157</code> of <code>./fglrx/common/lib/modules/fglrx/build_mod/firegl_public.c</code> to be <pre>for_each_possible_cpu(p)</pre>.
 +
After this, execute <pre>./fglrx/common/lib/modules/fglrx/build_mod/make.sh</pre> as root. If you get an error about no make target for <code>libfglrx_ip.a</code>, then copy the one from <code>./fglrx/arch/x86_64/lib/modules/fglrx/build_mod</code> to <code>./fglrx/common/lib/modules/fglrx/build_mod/</code> and try again.
 +
Finally, run <pre>./fglrx/common/lib/modules/fglrx/make_install.sh</pre> as root then <pre>reboot</pre> to check your results, which I do by seeing if this command correctly outputs a temperature.
 +
<pre>aticonfig --adapter=0 --od-gettemperature</pre>

Revision as of 14:28, 7 June 2012

amd catalyst 12.6 beta can work well with fedora 17.


http://support.amd.com/us/kbarticles/Pages/AMDCatalyst126beta.aspx

how-to install?

If you have an HD4xxx series card, Catalyst 12.4 is the newest driver to support it (as of June 4, 2012). This won't work with X version 1.12 (the one packaged with Fedora 17). To downgrade to X version 1.11, use the following commands (as root).
Note: I'm assuming x86_64
IMPORTANT: I'd highly recommend going down to runlevel 3 first. You can do this using the following command in one of the text consoles (<CTRL> + <ALT> + <Fx> where x is 1-9, just try them until you get to a console)

systemctl isolate runlevel3.target

Commands for downgrading X:

yum erase xorg-x11-drv-intel
yum --releasever=16 install libxcb* xcb-util startup-notification*
yum --releasever=16 downgrade *xcb* xorg*

You may also need libxcb.i686 from the Fedora 16 release. The intel driver has additional dependencies, and those with AMD/ATi cards don't need it anyway.

To solve the issues with the new kernel source, use the steps in

UPDATE
3.4.0 has been pushed as the most recent kernel update. This will require recompiling the drivers in addition to commenting the two lines out of uaccess_64.h. Make sure you've rebooted into the new kernel before compiling the driver. To compile go to the directory where the amd-driver-installer-12-4-x86.x86_64.run file is and type:

./amd-driver-installer-12-4-x86.x86_64.run --extract fglrx
You will then need to edit ./fglrx/common/lib/modules/fglrx/build_mod/kcl_ioctl.c and add the line
DEFINE_PER_CPU(unsigned long, old_rsp);
on line 220 directly under the end of the multi-line comment. You also need to edit line 4157 of ./fglrx/common/lib/modules/fglrx/build_mod/firegl_public.c to be
for_each_possible_cpu(p)
. After this, execute
./fglrx/common/lib/modules/fglrx/build_mod/make.sh
as root. If you get an error about no make target for libfglrx_ip.a, then copy the one from ./fglrx/arch/x86_64/lib/modules/fglrx/build_mod to ./fglrx/common/lib/modules/fglrx/build_mod/ and try again. Finally, run
./fglrx/common/lib/modules/fglrx/make_install.sh
as root then
reboot
to check your results, which I do by seeing if this command correctly outputs a temperature.
aticonfig --adapter=0 --od-gettemperature