Difference between revisions of "Fedora 8 Installation Guide"

From cchtml.com
Jump to: navigation, search
(DfxJWtpcjk)
m (Reverted edits by 38.104.66.162 (talk) to last revision by Mooninite)
Line 1: Line 1:
Hello, I was looking for soniehtmg like this, but I have a question, how can I perform these actions If when I try to do this bash told me:permission denied, even with root or sudoers permissions.can you explain me that, please?
+
==General Status==
 +
* Supported since [[Catalyst 7.11]], which adds support for kernel 2.6.23.
 +
 
 +
==Installation Option #1 Freshrpms.net repository==
 +
rpm -ihv http://ftp.freshrpms.net/pub/freshrpms/fedora/linux/8/freshrpms-release/freshrpms-release-1.1-1.fc.noarch.rpm
 +
yum install -y ati-x11-drv
 +
and restart your system.
 +
 
 +
==Installation Option #2 Livna repository==
 +
rpm -ivh http://rpm.livna.org/livna-release-8.rpm
 +
* [http://www.fedorafaq.org/#radeon These instructions] on the Unoffical Fedora FAQ work. (In order not to duplicate the the instructions, we provide the link rather than the instructions themselves).
 +
 
 +
==Installation Option #3 via ATI Installer==
 +
You can get the latest ATI-Driver here:
 +
 
 +
[http://ati.amd.com/support/drivers/linux/linux-radeon.html|ATI Linux Driver]
 +
 
 +
The above bugzilla contains a patch to the firegl module source code. Here is an annotated walk-through for those not familiar with using the patch utility:
 +
* Install the driver interactively
 +
sh ./ati-driver-installer-8.42.3-x86.x86_64.run
 +
* Backup the existing module, download the patch
 +
cd /lib/modules/fglrx/build_mod/
 +
cp firegl_public.c firegl_public.c.orig
 +
wget -qO- http://ati.cchtml.com/attachment.cgi?id=466 > firegl.patch
 +
* Apply the patch
 +
patch -p0 < firegl.patch
 +
* Now build and install the kernel module
 +
./make.sh
 +
cd .. ; ./make_install.sh
 +
* Create an initial X Server configuration file
 +
aticonfig --initial
 +
* Restart your X Server (by logging out/in or rebooting)
 +
 
 +
==Issues==
 +
* AMD/ATI Catalist Control Center (amdcccle) fails to start, see [http://ati.cchtml.com/show_bug.cgi?id=672 this bugzilla entry].
 +
 
 +
FYI: this patch (and others like it) is incomplete.  It fails miserably with the drm module loaded.  It will not work without drm either, and what would be the point?
 +
As seen by dmesg:
 +
 
 +
[drm] Initialized drm 1.1.0 20060810
 +
[fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
 +
[fglrx] ASYNCIO init succeed!
 +
[fglrx:KCL_enable_pat] *ERROR* Pat entry 2 is already configured
 +
[fglrx] PAT is disabled!
 +
[fglrx:firegl_init_module] *ERROR* firegl_stub_register failed
 +
 
 +
The livna rpm incurs the same failure.  Stick with F7 and kernel 2.6.22, or use the radeon driver instead.
 +
 
 +
----
 +
Updated by yangyud:<br>
 +
You need to remove the loaded "drm" module from kernel before install the fglrx module.<br>
 +
'''rmmod radeon; rmmod drm'''  <br>
 +
 
 +
==See Also==
 +
* [[Frequently Asked Questions#Why does fglrx not work for my bleeding-edge kernel?]]
 +
 
 +
[[Category:Installation Documentation]]
 +
Ok, the problem is gdm.  I can `startx`, but gdm fails to load with fglrx, and there is no indication in any log as to why.
 +
This continues with new 7.11 Catalyst driver.
 +
Because of this, the problem is NOT with the driver, rather it is the default GDM time value of 10-seconds.  To remedy:
 +
 
 +
vi /etc/gdm/custom.conf
 +
 +
[daemon]
 +
GdmXserverTimeout=60
 +
 
 +
This allows enough time for X to startup before gdm considers it dead and aborts the X startup process.

Revision as of 09:01, 10 December 2012

General Status

  • Supported since Catalyst 7.11, which adds support for kernel 2.6.23.

Installation Option #1 Freshrpms.net repository

rpm -ihv http://ftp.freshrpms.net/pub/freshrpms/fedora/linux/8/freshrpms-release/freshrpms-release-1.1-1.fc.noarch.rpm
yum install -y ati-x11-drv

and restart your system.

Installation Option #2 Livna repository

rpm -ivh http://rpm.livna.org/livna-release-8.rpm
  • These instructions on the Unoffical Fedora FAQ work. (In order not to duplicate the the instructions, we provide the link rather than the instructions themselves).

Installation Option #3 via ATI Installer

You can get the latest ATI-Driver here:

Linux Driver

The above bugzilla contains a patch to the firegl module source code. Here is an annotated walk-through for those not familiar with using the patch utility:

  • Install the driver interactively
sh ./ati-driver-installer-8.42.3-x86.x86_64.run
  • Backup the existing module, download the patch
cd /lib/modules/fglrx/build_mod/
cp firegl_public.c firegl_public.c.orig
wget -qO- http://ati.cchtml.com/attachment.cgi?id=466 > firegl.patch
  • Apply the patch
patch -p0 < firegl.patch
  • Now build and install the kernel module
./make.sh
cd .. ; ./make_install.sh
  • Create an initial X Server configuration file
aticonfig --initial
  • Restart your X Server (by logging out/in or rebooting)

Issues

FYI: this patch (and others like it) is incomplete. It fails miserably with the drm module loaded. It will not work without drm either, and what would be the point? As seen by dmesg:

[drm] Initialized drm 1.1.0 20060810
[fglrx] Maximum main memory to use for locked dma buffers: 1898 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx:KCL_enable_pat] *ERROR* Pat entry 2 is already configured
[fglrx] PAT is disabled!
[fglrx:firegl_init_module] *ERROR* firegl_stub_register failed

The livna rpm incurs the same failure. Stick with F7 and kernel 2.6.22, or use the radeon driver instead.


Updated by yangyud:
You need to remove the loaded "drm" module from kernel before install the fglrx module.
rmmod radeon; rmmod drm

See Also

Ok, the problem is gdm. I can `startx`, but gdm fails to load with fglrx, and there is no indication in any log as to why. This continues with new 7.11 Catalyst driver. Because of this, the problem is NOT with the driver, rather it is the default GDM time value of 10-seconds. To remedy:

vi /etc/gdm/custom.conf

[daemon]
GdmXserverTimeout=60

This allows enough time for X to startup before gdm considers it dead and aborts the X startup process.