Difference between revisions of "Fedora Core 5 Installation Guide"

From cchtml.com
Jump to: navigation, search
(Installation)
(Installation)
Line 20: Line 20:
 
#Download the latest [[:Category:Releases|release]].
 
#Download the latest [[:Category:Releases|release]].
 
#su to root in init level 3 (No X server running)
 
#su to root in init level 3 (No X server running)
#X_VERSION=x690 ./ati-installer-(version).run
+
#./ati-installer-(version).run
 
#Follow the prompts and it will install.
 
#Follow the prompts and it will install.
#Link the libraries, executables and modules to the proper directories:
 
ln -s /usr/X11R6/lib/lib* /usr/lib
 
ln -s /usr/X11R6/lib/modules/dri/* /usr/lib/xorg/modules/dri
 
ln -s /usr/X11R6/lib/modules/drivers/* /usr/lib/xorg/modules/drivers
 
ln -s /usr/X11R6/lib/modules/linux/* /usr/lib/xorg/modules/linux
 
  
 
===Post-Installation===
 
===Post-Installation===

Revision as of 00:06, 25 May 2006

  • Note: You must have your "kernel-devel-[version]" RPM package installed prior to fglrx installation.

Fedora Core 5 uses the 2.6.16 kernel, which is not yet supported by the fglrx driver without some kernel recompiling.

livna.org package

  1. Enable the livna repository
  2. Install the drivers and kernel module
   rpm -ivh http://rpm.livna.org/livna-release-5.rpm
   yum install kmod-fglrx

Notes:

  • For ease of installation and updating, the package name of the driver has been changed
  • As of today (2006-04-08) livna is still working out install bugs ( Bugtracker ) in the X86_64 package. It apperas they have fixed the problem, but have not yet finished testing. Some people report mixed success compiling from the source RPMS. YMMV.

Official ATI Binary installer

Pre-installation

Update your kernel, kernel-devel, and xorg packages to the very latest before installation.

Installation

  1. Download the latest release.
  2. su to root in init level 3 (No X server running)
  3. ./ati-installer-(version).run
  4. Follow the prompts and it will install.

Post-Installation

  1. Run the aticonfig --initial command if you have not updated your X.org configuration file (xorg.conf).
  2. Change back to run level 5. init 5

RedHat's developers strongly recommend against using the install package provided by ATI. It's sloppy install methods can render X unstable or even unusable even after uninstalling.

RPM installer

No longer supported as Fedora Core 5 is shipping with X.org version 7.0.