Linux Mint: Difference between revisions

From cchtml.com
No edit summary
 
(39 intermediate revisions by 2 users not shown)
Line 1: Line 1:
===ATI Driver installation Mint 17.2===
===ATI Driver Installation on Mint 17.x(DO NOT USE ON Mint 18+!!!, fglrx/Crimson is deprecated)===




Line 8: Line 8:
* '''vesa''' - very basic, lacks 2D/3D acceleration, and focuses on compatibility with all VESA-compliant graphics cards. It is good for starting the GUI environment when no accelerated driver is available/working, and little else.
* '''vesa''' - very basic, lacks 2D/3D acceleration, and focuses on compatibility with all VESA-compliant graphics cards. It is good for starting the GUI environment when no accelerated driver is available/working, and little else.
* '''ati''' - actually a thin wrapper that will invoke the radeon driver (or another ati open-source driver for pre-Radeon cards).  
* '''ati''' - actually a thin wrapper that will invoke the radeon driver (or another ati open-source driver for pre-Radeon cards).  
* '''radeon''' - open source driver supporting all Radeon cards. This driver has excellent 2D acceleration and compatibility with the Linux graphics stack. 3D acceleration is sufficient for desktop effects and a nice set of native Linux games.
* '''radeon/radeonSI''' - open source driver supporting all Radeon cards. This driver has excellent 2D acceleration and compatibility with the Linux graphics stack. 3D acceleration is sufficient for desktop effects and a nice set of native Linux games, [http://mesamatrix.net/ Current development is increasing available features quickly, to check on the progress you can head to mesamatrix.net or click here]
* '''Catalyst (a.k.a fglrx)''' a proprietary "blob" (closed source binary) driver designed by ATI, with 3D code based off of their Windows driver. Only RadeonHD 5000+ chips are supported on recent Linux distros.
* '''Catalyst (a.k.a fglrx)''' a proprietary "blob" (closed source binary) driver designed by ATI, with 3D code based on their Windows driver. Only RadeonHD 5000+ chips are supported on recent Linux distros.


= Updated Open Source Driver PPA's =
= Updated Open Source Driver PPA's =
Line 37: Line 37:
I recommend copying and pasting the commands to ensure there are no typing mistakes and speed up the install process. Remember to use Ctrl '''+ Shift''' + V or Shift + Insert to paste into the terminal (or go to the terminals menu, select edit and click paste).
I recommend copying and pasting the commands to ensure there are no typing mistakes and speed up the install process. Remember to use Ctrl '''+ Shift''' + V or Shift + Insert to paste into the terminal (or go to the terminals menu, select edit and click paste).


== Before you start ==
== '''Before you start''' ==
If you have previously attempted installing Catalyst, remove any leftover files by following the [[#Removing_Catalyst.2Ffglrx| Removing the Driver]] section. Make sure ''universe'' and ''multiverse'' are enabled in your repository sources (System -> Administration -> Software Sources).
If you have previously attempted installing Catalyst, remove any leftover files by following the [[#Removing_Catalyst.2Ffglrx| Removing the Driver]] section.  
or Applications->Ubuntu Software Center->Edit->Software sources->Other software: check canonical partners.


Install the prerequisite packages:
Install the prerequisite packages:
  sudo apt-get install cdbs dh-make dkms execstack dh-modaliases linux-headers-generic libqtgui4 xserver-xorg-dev-lts-trusty
  sudo apt install cdbs dh-make dkms execstack dh-modaliases libqtgui4 xserver-xorg-dev-lts-trusty


''If you are using the x86_64 architecture (64 bit)'':
''If you are using the x86_64 architecture (64 bit)'':
  sudo apt-get install lib32gcc1
  sudo apt install lib32gcc1


== Installing Catalyst Manually (from AMD/ATI's site) ''STABLE'' ==
== Installing Catalyst Manually (from AMD/ATI's site) ''STABLE'' ==
Line 55: Line 54:
  wget <nowiki>--referer='http://support.amd.com/en-us/download/desktop?os=Linux+x86' http://www2.ati.com/drivers/linux/</nowiki>{{Catalystfilename}}
  wget <nowiki>--referer='http://support.amd.com/en-us/download/desktop?os=Linux+x86' http://www2.ati.com/drivers/linux/</nowiki>{{Catalystfilename}}
  unzip {{Catalystfilename}}
  unzip {{Catalystfilename}}
cd fglrx-15.302/


=== Create and install .deb packages ===
=== Create and install .deb packages ===
Line 62: Line 62:


  chmod a+x {{Catalystrunname}}
  chmod a+x {{Catalystrunname}}
  sudo ./{{Catalystrunname}} --buildpkg Ubuntu/trusty
  sudo ./{{Catalystrunname}} --buildpkg Ubuntu/trusty  
  sudo dpkg -i fglrx*.deb
  sudo dpkg -i fglrx*.deb
=== Generate a basic Xorg configuration ===
After all the fglrx .deb components have been installed but BEFORE RESTARTING is is highly recommended you generate a basic xorg configuration file.
Generally speaking fglrx will do this automatically upon next boot, but sometimes it does not(resulting in black screens and xserver start failures)
Better safe than sorry.
Generate a generic configuration with the following command:
sudo amdconfig --initial -f
Then reboot.


If building .deb packages fails you can try an [http://wiki.cchtml.com/index.php/Ubuntu_Precise_Installation_Guide#Alternative_Manual_Installation Alternative Manual Installation] which does NOT create deb packages and might cause some trouble when trying to uninstall.
If building .deb packages fails you can try an [http://wiki.cchtml.com/index.php/Ubuntu_Precise_Installation_Guide#Alternative_Manual_Installation Alternative Manual Installation] which does NOT create deb packages and might cause some trouble when trying to uninstall.
Line 165: Line 180:
This is confirmed to work for newer RadeonHD GPU's (those with UVD2). If you have a RadeonHD 4000-series or newer, you have UVD2. To see the complete list: http://en.wikipedia.org/wiki/Unified_Video_Decoder#UVD_enabled_GPUs
This is confirmed to work for newer RadeonHD GPU's (those with UVD2). If you have a RadeonHD 4000-series or newer, you have UVD2. To see the complete list: http://en.wikipedia.org/wiki/Unified_Video_Decoder#UVD_enabled_GPUs


  sudo apt-get install xvba-va-driver
  sudo apt install xvba-va-driver


=== Utilize VA-API Acceleration ===
=== Utilize VA-API Acceleration ===
Line 172: Line 187:
For Gstreamer acceleration (Firefox, Totem) you also need:
For Gstreamer acceleration (Firefox, Totem) you also need:


  sudo apt-get install gstreamer1.0-vaapi
  sudo apt install gstreamer1.0-vaapi


Note, however, that installing the above package is [https://bugs.launchpad.net/ubuntu/+source/gstreamer-vaapi/+bug/1395070 known to crash Firefox] when trying to play HTML5 video.
Note, however, that installing the above package is [https://bugs.launchpad.net/ubuntu/+source/gstreamer-vaapi/+bug/1395070 known to crash Firefox] when trying to play HTML5 video.
Line 182: Line 197:
It uses OpenGL under the hood to accelerate drawing and scaling and VA-API (if available) to accelerate video decoding.  
It uses OpenGL under the hood to accelerate drawing and scaling and VA-API (if available) to accelerate video decoding.  
  sudo add-apt-repository ppa:nilarimogard/webupd8
  sudo add-apt-repository ppa:nilarimogard/webupd8
  sudo apt-get update
  sudo apt update
  sudo apt-get install libvdpau-va-gl1
  sudo apt install libvdpau-va-gl1


Adobe Flash doesn't use hardware acceleration by default on Linux so we'll have to force it.
Adobe Flash doesn't use hardware acceleration by default on Linux so we'll have to force it.
Line 203: Line 218:
The tool ''"vainfo"'' allows you to test the proper functioning of the xvba-va driver.
The tool ''"vainfo"'' allows you to test the proper functioning of the xvba-va driver.


  sudo apt-get install vainfo
  sudo apt install vainfo
  vainfo
  vainfo


Line 229: Line 244:


  sudo add-apt-repository ppa:oibaf/graphics-drivers
  sudo add-apt-repository ppa:oibaf/graphics-drivers
  sudo apt-get update
  sudo apt update
  sudo apt-get upgrade
  sudo apt upgrade


Reboot your system and proceed by installing the VDPAU driver.
Reboot your system and proceed by installing the VDPAU driver.


  sudo apt-get install mesa-vdpau-drivers
  sudo apt install mesa-vdpau-drivers


You can test the VDPAU driver by using mplayer.
You can test the VDPAU driver by using mplayer.
Line 254: Line 269:
To revert to standard Ubuntu drivers
To revert to standard Ubuntu drivers


  sudo apt-get install ppa-purge
  sudo apt install ppa-purge
  sudo ppa-purge ppa:oibaf/graphics-drivers
  sudo ppa-purge ppa:oibaf/graphics-drivers


=Updating Catalyst/fglrx=
=Updating Catalyst/fglrx=


DO NOT try to install a new version over an old one. Follow the 'Removing Catalyst/fglrx' section below to remove your existing driver, and then you can start at 'Downloading the latest Catalyst' to install the new one.
<big><big>'''DO NOT TRY INSTALLING A NEWER FGLRX OVER AN OLDER ONE!!!'''</big></big>. Follow the 'Removing Catalyst/fglrx' section below to remove your existing driver, and then you can start at 'Downloading the latest Catalyst' to install the new one.


=Removing Catalyst/fglrx=
=Removing Catalyst/fglrx=
The uninstall script in the first command will only exist if you downloaded the drivers and installed them directly (rather than building packages as this guide does). Skip the first command if it does not exist.
The uninstall script in the first command will only exist if you downloaded the drivers and installed them directly (rather than building packages as this guide does).  
sudo sh /usr/share/ati/fglrx-uninstall.sh
  sudo apt remove --purge fglrx*
  sudo apt-get remove --purge fglrx*


=IMPORTANT!=
If you plan on using open-source drivers, you will need to reinstall some packages because Catalyst overwrites or diverts some key 3D libraries with proprietary versions. For more information on this issue, see [https://wiki.ubuntu.com/X/Troubleshooting/FglrxInteferesWithRadeonDriver this Ubuntu wiki page]
If you plan on using open-source drivers, you will need to reinstall some packages because Catalyst overwrites or diverts some key 3D libraries with proprietary versions. For more information on this issue, see [https://wiki.ubuntu.com/X/Troubleshooting/FglrxInteferesWithRadeonDriver this Ubuntu wiki page]
  sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
  sudo apt remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
  sudo apt-get install xserver-xorg-video-ati
  sudo apt install xserver-xorg-video-ati
  sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core
  sudo apt install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core
  sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
  sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
  sudo rm -rf /etc/ati
  sudo rm -rf /etc/ati
Line 279: Line 294:
Change the third command above to:
Change the third command above to:


  sudo apt-get install --reinstall libgl1-mesa-glx:i386 libgl1-mesa-glx:amd64 libgl1-mesa-dri:i386 libgl1-mesa-dri:amd64 xserver-xorg-core
  sudo apt install --reinstall libgl1-mesa-glx:i386 libgl1-mesa-glx:amd64 libgl1-mesa-dri:i386 libgl1-mesa-dri:amd64 xserver-xorg-core


= Issues =
= Issues =
Line 299: Line 314:


Install the compiz settings manager:  
Install the compiz settings manager:  
  sudo apt-get install compizconfig-settings-manager
  sudo apt install compizconfig-settings-manager
  ccsm
  ccsm


Line 353: Line 368:
Most likely, you probably did not have the ia32-libs-multiarch:i386 lib32gcc1 libc6-i386 packages installed beforehand. If you have a 64 bit install, the above dpkg command may complain that "Errors were encountered while processing: fglrx-amdcccle".  This is because of a dependency of the amdccle package on 32 bit libraries.  If you receive this error, use the following command, which will force the installation of all of the 32 bit dependencies, and then the amdcccle package:
Most likely, you probably did not have the ia32-libs-multiarch:i386 lib32gcc1 libc6-i386 packages installed beforehand. If you have a 64 bit install, the above dpkg command may complain that "Errors were encountered while processing: fglrx-amdcccle".  This is because of a dependency of the amdccle package on 32 bit libraries.  If you receive this error, use the following command, which will force the installation of all of the 32 bit dependencies, and then the amdcccle package:


  sudo apt-get -f install
  sudo apt install -f


Catalyst {{Template:Catalystversion}} on 64-bit systems may require the ''--force-overwrite'' command in the above ''dpkg'' command:
Catalyst {{Template:Catalystversion}} on 64-bit systems may require the ''--force-overwrite'' command in the above ''dpkg'' command:
Line 553: Line 568:


After you have created or downloaded the .deb files, but '''before you install them''', repackage the fglrx-core package by doing the following
After you have created or downloaded the .deb files, but '''before you install them''', repackage the fglrx-core package by doing the following
  dpkg-deb -R fglrx-core_15.201-0ubuntu1_amd64.deb fglrx-core
  dpkg-deb -R fglrx-core_15.302-0ubuntu1_amd64.deb fglrx-core
  sed -ri 's/(Conflicts|Provides).*/\1: fglrx-driver-core/' fglrx-core/DEBIAN/control
  sed -ri 's/(Conflicts|Provides).*/\1: fglrx-driver-core/' fglrx-core/DEBIAN/control
  sudo dpkg-deb -b fglrx-core/ fglrx-core_15.201-0ubuntu1_amd64.deb
  sudo dpkg-deb -b fglrx-core/ fglrx-core_15.302-0ubuntu1_amd64.deb
Now continue to install the packages as usual (usually dpkg -i)
Now continue to install the packages as usual (usually dpkg -i)


== "apt-get upgrade" overwrites the packages you've manually installed ==
== "apt upgrade" overwrites the packages you've manually installed ==
You may find that apt-get will "upgrade" the version you've installed to the version from an upstream repository.  To stop this behaviour you can run
You may find that apt will "upgrade" the version you've installed to the version from an upstream repository.  To stop this behavior you can run
  sudo apt-mark hold fglrx-dev fglrx-core fglrx fglrx-amdcccle
  sudo apt-mark hold fglrx-dev fglrx-core fglrx fglrx-amdcccle
If you later want to reenable this functionality you can run
If you later want to reenable this functionality you can run
  sudo apt-mark unhold fglrx-dev fglrx-core fglrx fglrx-amdcccle
  sudo apt-mark unhold fglrx-dev fglrx-core fglrx fglrx-amdcccle
== References ==
== References and External Resources ==
 
*[http://linuxmint.com/ Linux Mint Homepage]
 
*[http://support.amd.com/en-us/download/desktop?os=Linux+x86 AMD Linux Driver Page]
 
*[http://community.linuxmint.com/ Linux Mint Community Website]
 
*[http://forums.linuxmint.com/index.php Linux Mint Forums]
 
*[https://www.reddit.com/r/linuxmint/ The Linux Mint Subreddit]
 
*[https://wiki.archlinux.org/index.php/AMD_Catalyst The Fglrx Arch Wiki]
 


<references/>
<references/>

Latest revision as of 18:05, 22 October 2016

ATI Driver Installation on Mint 17.x(DO NOT USE ON Mint 18+!!!, fglrx/Crimson is deprecated)

The Options

Users with ATI cards have the following driver options:

  • vesa - very basic, lacks 2D/3D acceleration, and focuses on compatibility with all VESA-compliant graphics cards. It is good for starting the GUI environment when no accelerated driver is available/working, and little else.
  • ati - actually a thin wrapper that will invoke the radeon driver (or another ati open-source driver for pre-Radeon cards).
  • radeon/radeonSI - open source driver supporting all Radeon cards. This driver has excellent 2D acceleration and compatibility with the Linux graphics stack. 3D acceleration is sufficient for desktop effects and a nice set of native Linux games, Current development is increasing available features quickly, to check on the progress you can head to mesamatrix.net or click here
  • Catalyst (a.k.a fglrx) a proprietary "blob" (closed source binary) driver designed by ATI, with 3D code based on their Windows driver. Only RadeonHD 5000+ chips are supported on recent Linux distros.

Updated Open Source Driver PPA's

BOTH OF THESE OPTIONS CAN BE VERY UNSTABLE, USE CAUTION!!

Installing Proprietary Drivers a.k.a. Catalyst/fglrx

ATTENTION RADEON USERS

*PLEASE READ FIRST!

Which Radeon cards are no longer supported by ATI's Catalyst?

ATI Radeon 9500-9800, Xpress200-1250, 690G, 740G, X300-X2500, Mobility RadeonHD 2300 If your card is on that list, you are limited to open-source drivers on Ubuntu Lucid/10.04 (and later). NOTE: If you enter your card information on AMD/ATI's driver page, it will offer you the Catalyst 9-3 driver to download. However, the Catalyst 9-3 driver doesn't support X servers past 1.5, and it will not work with any modern/supported version of Ubuntu! !!!SO BE CAREFUL!!! If you tried to install Catalyst on a system with one of these cards, see the 'Removing the Driver' section to restore the default/pre-installed drivers.

ATI RadeonHD 2x00 - 4xx0 cards If you have one of these cards, you have the option of using the Catalyst Legacy driver, but you will need to install/use Ubuntu 12.04.1

I recommend copying and pasting the commands to ensure there are no typing mistakes and speed up the install process. Remember to use Ctrl + Shift + V or Shift + Insert to paste into the terminal (or go to the terminals menu, select edit and click paste).

Before you start

If you have previously attempted installing Catalyst, remove any leftover files by following the Removing the Driver section.

Install the prerequisite packages:

sudo apt install cdbs dh-make dkms execstack dh-modaliases libqtgui4 xserver-xorg-dev-lts-trusty

If you are using the x86_64 architecture (64 bit):

sudo apt install lib32gcc1

Installing Catalyst Manually (from AMD/ATI's site) STABLE

Download the latest Catalyst package

This package contains both the 32-bit and 64-bit driver.

mkdir catalyst15.12 && cd catalyst15.12
wget --referer='http://support.amd.com/en-us/download/desktop?os=Linux+x86' http://www2.ati.com/drivers/linux/radeon-crimson-15.12-15.302-151217a-297685e.zip
unzip radeon-crimson-15.12-15.302-151217a-297685e.zip
cd fglrx-15.302/

Create and install .deb packages

If you have Wine installed, the driver installation may fail due to a conflict with a library included with Wine.

When/if this is the case you'll need to modify the fglrx-core package before executing the third command below.

chmod a+x amd-driver-installer-15.302-x86.x86_64.run
sudo ./amd-driver-installer-15.302-x86.x86_64.run --buildpkg Ubuntu/trusty   
sudo dpkg -i fglrx*.deb

Generate a basic Xorg configuration

After all the fglrx .deb components have been installed but BEFORE RESTARTING is is highly recommended you generate a basic xorg configuration file.

Generally speaking fglrx will do this automatically upon next boot, but sometimes it does not(resulting in black screens and xserver start failures)

Better safe than sorry.

Generate a generic configuration with the following command:

sudo amdconfig --initial -f

Then reboot.


If building .deb packages fails you can try an Alternative Manual Installation which does NOT create deb packages and might cause some trouble when trying to uninstall.

Installing Catalyst Manually (from AMD/ATI's site) BETA/EXPERIMENTAL NOT SUGGESTED!

Note that the beta drivers aren't neccassarily newer than the stable drivers.

Download the latest Catalyst package

This package contains both the 32-bit and 64-bit driver.

mkdir catalyst-14.6beta1.0jul11 && cd catalyst-14.6beta1.0jul11
wget --referer='http://support.amd.com/en-us/download/desktop?os=Linux+x86' http://www2.ati.com/drivers/beta/linux-amd-catalyst-14.6-beta-v1.0-jul11.zip
unzip linux-amd-catalyst-14.6-beta-v1.0-jul11.zip
cd fglrx-14.20

Create and install .deb packages

sudo ./amd-driver-installer-14.20-x86.x86_64.run --buildpkg Ubuntu/trusty
sudo dpkg -i fglrx*.deb

If building .deb packages fails, there is also an Alternative Manual Installation

In case of failure

Remember these steps before you reboot your computer.

If the X server fails to start, switch to a new TTY using ctrl+alt+F2. Log in, and attempt to start the X server.

sudo startx

If it fails to start, you will likely see a stacktrace, and immediately above it will be something along the lines of "Could not stat /usr/lib64/fglrx/switchlibGL" which means that you failed to copy the executables properly. Ctrl+c, and immediately copy the switchlibGL and switchlibglx executables to the fglrx folder in /usr/lib64/ or /usr/lib32/.

If all else fails, revert your xorg.conf and reboot.

sudo cp /etc/X11/xorg.conf.orig /etc/X11/xorg.conf

This should return your original display.

Generate a new /etc/X11/xorg.conf file

Unfortunately, there is no sure way to generate the ATI version of the Xorg.conf file. It is entirely dependent on your configuration. The following subsections will attempt to address possible (and tested) variations for their respective configurations.

Generic Config

This will work for most people:

sudo amdconfig --initial -f

Minimal Config

A very basic /etc/X11/xorg.conf file might be what you need if you have a new card that's not fully supported by amdconfig. Here follows the entirety of a minimal xorg.conf file for the Radeon HD 6870:

Section "Device"
 Identifier "ATI radeon 6870"
 Driver "fglrx"
EndSection

X2/Dual GPU Cards

If you have an X2 card (e.g. 5970), use... !!Do not use for two separate cards in crossfire!!

sudo amdconfig --initial -f --adapter=all

Dual/Multi Monitors

If you have a dual monitor display (also known as "Big Desktop"), use:

sudo amdconfig --initial -f
sudo amdconfig --set-pcs-str="DDX,EnableRandR12,FALSE"

This was confirmed in http://phoronix.com/forums/showthread.php?t=18553. Be advised that you may need to manually set the correct refresh rate for your second monitor through catalyst.

Force use of the new xorg.conf (if necessary)

Some people find that changes to xorg.conf don't get used by the driver. To force the ATI driver to adopt changes made to xorg.conf, use the following command:

sudo amdconfig --input=/etc/X11/xorg.conf --tls=1

Test your installation

NOTE: if you don't reboot first, fglrxinfo gives an error message. Reboot the computer and type

fglrxinfo

into the terminal. If the vendor string contains AMD, you have installed the driver successfully. Using fglrxinfo on a system with Catalyst 12-3 and a RadeonHD 4550 returns:

display: :0.0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: AMD Radeon HD 6670  --  (This line may be different depending on what graphics card you are using!)
OpenGL version string: 4.3.12798 Compatibility Profile Context 13.35.1005  --  (This line may be different depending on what graphics card and Catalyst version you are using!)

Now, try:

fgl_glxgears

If you experience issues or a hang, you may need to disable fast TLS.

sudo amdconfig --tls=0

Just in case

Write down or remember this series of Alt+PrntScr key combinations, just in case your screen should go black and Ctrl+Alt+F1 and Ctrl+Alt+Backspace doesn't work.

Alt+PrntScr+r, Alt+PrntScr+s, Alt+PrntScr+e, Alt+PrntScr+i, Alt+PrntScr+n, Alt+PrntScr+u, Alt+PrntScr+b

These key-presses will reboot the system safely. To remember the key-presses, remember this nonsensical phrase: "Raising Skinny Elephants Is Never Utterly Boring".

An alternative would be to hold down Ctrl+Alt+SysRq (SysRq is usually the same key as PrintScreen) and type very slowly R E I S U B. A way to remember this is by inverting the word: "BUSIER" or remembering a phrase: "Restart Even If System Utterly Broken". This would also safely shutdown the system.

Hardware Video Decode Acceleration

Using VA-API

VA-API is supported by default as of Catalyst 14.12. No additional driver has to be installed any more. The xvba-va driver section below only applies to Catalyst 14.9 and older.

Using the xvba-va driver (pre Catalyst 14.12)

NOTE: The VA-API wrapper for XvBA has been dead code for a while now. It will give you some acceleration of HD formats though.

This is confirmed to work for newer RadeonHD GPU's (those with UVD2). If you have a RadeonHD 4000-series or newer, you have UVD2. To see the complete list: http://en.wikipedia.org/wiki/Unified_Video_Decoder#UVD_enabled_GPUs

sudo apt install xvba-va-driver

Utilize VA-API Acceleration

A good player the utilizes va-api is VLC. You can enable va-api in Tools -> Preferences -> Input and Codecs. Check the box named "Use GPU accelerated decoding" and then restart VLC.

For Gstreamer acceleration (Firefox, Totem) you also need:

sudo apt install gstreamer1.0-vaapi

Note, however, that installing the above package is known to crash Firefox when trying to play HTML5 video.

Flash Hardware Video Decode Acceleration (EXPERIMENTAL)

This only applies to Firefox and other NPAPI-compatible web browsers not Pepper Flash included in Chrome.

This next part will provide a generic VDPAU library. It uses OpenGL under the hood to accelerate drawing and scaling and VA-API (if available) to accelerate video decoding.

sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt update
sudo apt install libvdpau-va-gl1

Adobe Flash doesn't use hardware acceleration by default on Linux so we'll have to force it.

sudo mkdir /etc/adobe
sudo echo -e "EnableLinuxHWVideoDecode =1\nOverrideGPUValidation =1" | sudo tee /etc/adobe/mms.cfg

Make sure you close Firefox and run it again with the following.

VDPAU_DRIVER=va_gl firefox

You can check if acceleration is working by right clicking a Flash video on YouTube and selecting "Stats for nerds". The stats box that shows up should display the following: "accelerated video rendering, accelerated video decoding"

Because of the highly experimental nature of this method it is not recommended to enable this system-wide. It is likely to cause problems with VDPAU-enabled applications. If, however, you don't want to keep starting Firefox with the above command (or just create a shortcut for it) you can enable the VDPAU acceleration system-wide with the following.

sudo sh -c "echo 'export VDPAU_DRIVER=va_gl' >> /etc/profile"

And reboot your system.

Test VA-API Acceleration

The tool "vainfo" allows you to test the proper functioning of the xvba-va driver.

sudo apt install vainfo
vainfo

vainfo should return something like the following (and no errors):

     libva: libva version 0.32.0
     Xlib:  extension "XFree86-DRI" missing on display ":0.0".
     libva: va_getDriverName() returns 0
     libva: Trying to open /usr/lib/dri/fglrx_drv_video.so
     libva: va_openDriver() returns 0
     vainfo: VA API version: 0.32
     vainfo: Driver version: Splitted-Desktop Systems XvBA backend for VA-API - 0.7.8
     vainfo: Supported profile and entrypoints
     VAProfileH264High               :	VAEntrypointVLD
     VAProfileVC1Advanced            :	VAEntrypointVLD

If vainfo returns an error, you may need to create a symlink. For 64-bit systems:

sudo ln -s /usr/lib/va/drivers/fglrx_drv_video.so /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so

For 32-bit systems:

sudo ln -s /usr/lib/va/drivers/fglrx_drv_video.so /usr/lib/dri/fglrx_drv_video.so

Using VDPAU (EXPERIMENTAL)

Requires the latest open source driver provided by Oibaf in his PPA.

sudo add-apt-repository ppa:oibaf/graphics-drivers
sudo apt update
sudo apt upgrade

Reboot your system and proceed by installing the VDPAU driver.

sudo apt install mesa-vdpau-drivers

You can test the VDPAU driver by using mplayer.

mplayer -vo vdpau -vc ffmpeg12vdpau yourvideofile

Flash Hardware Video Decode Acceleration

This only applies to Firefox and other NPAPI-compatible web browsers not Pepper Flash included in Chrome.

Adobe Flash doesn't use hardware acceleration by default on Linux so we'll have to force it.

sudo mkdir /etc/adobe
sudo echo -e "EnableLinuxHWVideoDecode =1\nOverrideGPUValidation =1" | sudo tee /etc/adobe/mms.cfg

Restart Firefox.

You can check if acceleration is working by right clicking a Flash video on YouTube and selecting "Stats for nerds". The stats box that shows up should display the following: "accelerated video rendering, accelerated video decoding"

Revert to original drivers

To revert to standard Ubuntu drivers

sudo apt install ppa-purge
sudo ppa-purge ppa:oibaf/graphics-drivers

Updating Catalyst/fglrx

DO NOT TRY INSTALLING A NEWER FGLRX OVER AN OLDER ONE!!!. Follow the 'Removing Catalyst/fglrx' section below to remove your existing driver, and then you can start at 'Downloading the latest Catalyst' to install the new one.

Removing Catalyst/fglrx

The uninstall script in the first command will only exist if you downloaded the drivers and installed them directly (rather than building packages as this guide does).

sudo apt remove --purge fglrx*

IMPORTANT!

If you plan on using open-source drivers, you will need to reinstall some packages because Catalyst overwrites or diverts some key 3D libraries with proprietary versions. For more information on this issue, see this Ubuntu wiki page

sudo apt remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
sudo apt install xserver-xorg-video-ati
sudo apt install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core
sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
sudo rm -rf /etc/ati

If you receive

$ E: Internal Error, No file name for libgl1-mesa-dri

Change the third command above to:

sudo apt install --reinstall libgl1-mesa-glx:i386 libgl1-mesa-glx:amd64 libgl1-mesa-dri:i386 libgl1-mesa-dri:amd64 xserver-xorg-core

Issues

Video Tearing

AMD/ATI claims that the "Tear Free Video" option is enabled by default, but that wasn't the case with Catalyst 12-3 installed on Kubuntu 12.04. If you're having issues with tearing, make sure that "Tear Free Video" is on. You can find this option in the Catalyst Control Center under 'Display Options' or you can use the following command:

sudo amdconfig --sync-video=on

The option will not take effect until you restart X (i.e. log out).

If you're using compositing, you should also make sure that vsync is enabled in the compositor's settings. I found that vsync was enabled by default, but here are the appropriate settings should you want to experiment.

kwin

You can enable vsync for kwin in System Settings -> Desktop Effects -> Advanced tab

Compiz (Unity)

TODO: See if there's a friendlier way to make sure vsync is enabled without installing ccsm.

Install the compiz settings manager:

sudo apt install compizconfig-settings-manager
ccsm

The 'Sync to Vblank' is found in the 'OpenGL' subsection of the 'General' group

Hybrid Graphics and Catalyst

There are two basic types of hybrid designs. Older hybrid systems use a multiplexor (mux) to switch between GPU's. Newer systems (those with PowerXpress >= 4.0) are muxless. As far as I can tell, PowerXpress 4.0 started with RadeonHD 6000-series GPU's, and systems with older ATI GPU's have a mux, but don't quote that.

ATI/ATI Hybrids

As of Catalyst 11-8, switching between two ATI cards (and maybe Intel/ATI muxless too?) is supposed to be doable, though it's not clear if that applies to all ATI/ATI hybrids or only the muxless ones. One would use amdconfig's PowerXpress options to switch back and forth between the integrated and discrete cards, like so:

amdconfig --pxl            # List current activated GPU
sudo amdconfig --px-dgpu   # Activate discrete GPU (High-Performance mode), must re-start X to take effect
sudo amdconfig --px-igpu   # Activate integrated GPU (Power-Saving mode), must re-start X to take effect

After switching, one would log out and back in to restart X.

Intel/ATI Hybrids

By using the officially provided drivers, there are three problems ( Launchpad Bug: #1068404):

An incompatibility problem between intel and fglrx drivers (This gives segmentation fault at X server)
An incompatibility problem between intel and fglrx drivers that gives an error related to allocation of resources in Xorg log file.
Some paths missing for openGL operation of the fglrx driver (This prevents applications that require direct rendering, e.g. Unity/games/etc, from loading correctly)

If you follow the instructions described in the Binary Driver HOWTO, you should get functional configuration.

If however you suffer from the problem related to intel driver not able to allocate resources, you need to install the older intel driver 2.20.2-1ubuntu1 which can be found at https://launchpad.net/ubuntu/quantal/+source/xserver-xorg-video-intel

There is still another bug if you use the integrated GPU (Intel), making the X server crashing ( Launchpad Bug: #1088220 )

A workaround for now is to use the discrete GPU (ATI)


For more information you may want to follow this forum topic


This post got both the integrated (Intel 3rd Gen Core processor Graphics Controller) and discrete (Radeon HD 7670M) to work on Ubuntu 13.04 x64.

This GitHub rep provides comfortable indicator for switching between cards.

Build Fails and Log Shows "mixed implicit and normal rules. Stop."

If the installation fails and you find the above message in /var/lib/dkms/fglrx/<version_number>/build/make.log, it may be because you're using a pentium-build wrapper around gcc. See what the following ls command returns:

ls -la /usr/bin/gcc

If it shows that gcc is a link to builder-cc, temporarily redirect the link to point to the real gcc (gcc-4.8 in Ubuntu Saucy). This should allow you to install fglrx:

sudo ln -sf /usr/bin/gcc-4.8 /usr/bin/gcc

When you're finished installing the driver, return the gcc link to its original value:

sudo ln -sf /usr/bin/builder-cc /usr/bin/gcc

Launchpad link for this bug: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/555957

"Errors were encountered while processing: fglrx-amdcccle" (on 64-bit systems)

Most likely, you probably did not have the ia32-libs-multiarch:i386 lib32gcc1 libc6-i386 packages installed beforehand. If you have a 64 bit install, the above dpkg command may complain that "Errors were encountered while processing: fglrx-amdcccle". This is because of a dependency of the amdccle package on 32 bit libraries. If you receive this error, use the following command, which will force the installation of all of the 32 bit dependencies, and then the amdcccle package:

sudo apt install -f

Catalyst 15.12 on 64-bit systems may require the --force-overwrite command in the above dpkg command:

sudo dpkg -i --force-overwrite fglrx*.deb

Problems Starting Xserver

If you get a black screen hang, the first thing to check is if xorg.conf is the problem.

You can disable the xorg.conf with:

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.disabled

Reboot and check to see if things work now.

You can reinstate the file with:

sudo mv /etc/X11/xorg.conf.disabled /etc/X11/xorg.conf

Before tweaking ACPI settings, try ensuring /dev/null is chmodded to 0666. This intermittently changes when using the nano (and possibly other) editors with sudo and the group/world permissions are unset. This leads to the ATI drivers hanging on boot or otherwise. A quick and dirty init script saved as /etc/init/chmodnull does the trick -

start on filesystem
script

chmod 0666 /dev/null chmod 0666 /lib/udev/devices/null

end script

This has been tested using Ubuntu 10.04 64-bit on a ATI Radeon HD 4830 (HP Envy 15-1060ea). It's worth noting that I had to disable TLS (amdconfig --tls=0) to get things to stay stable!

If you've properly installed the driver, but experience problems when starting the X server, such as hanging, black/white/gray screen, distortion, etc., your system BIOS may have a buggy ACPI implementation. To work around, press Ctrl+Alt+F1 to get to a terminal (or failing that, boot to recovery mode) and run:

sudo amdconfig --acpi-services=off

If this method works, you should consider checking your system vendor's BIOS changelogs for relevant ACPI fixes, updating your BIOS, and reenabling the driver's ACPI services.

Unsupported Hardware Watermark

This can happen if your card's PCI ID wasn't officially certified to work with a particular version of Catalyst. It does not necessarily mean that your card is unsupported, but it does mean that you shouldn't file bugs with that particular card/driver combination. If you installed the driver by downloading it from AMD/ATI, installing a newer version of Catalyst will probably help.

If you installed the proprietary driver included with Ubuntu or you do not want to upgrade to a newer version, it is possible to work around the issue. First check if AMD's signature file has a proper signature:

sudo nano /etc/ati/signature

If the file only contains the word UNSIGNED, replace the line with:

9777c589791007f4aeef06c922ad54a2:ae59f5b9572136d99fdd36f0109d358fa643f2bd4a2644d9efbb4fe91a9f6590a145:f612f0b01f2565cd9bd834f8119b309bae11a1ed4a2661c49fdf3fad11986cc4f641f1ba1f2265909a8e34ff1699309bf211a7eb4d7662cd9f8e3faf14986d92f646f1bc

Reboot and see if the watermark is gone. If not, try using a control file from a older version of Catalyst than the one you're running:

cd ~/; mkdir catalyst12.10; cd catalyst12.10/
wget http://www2.ati.com/drivers/linux/amd-driver-installer-catalyst-12.10-x86.x86_64.zip
unzip amd-driver-installer-catalyst-12.10-x86.x86_64.zip
chmod +x amd-driver-installer-catalyst-12.10-x86.x86_64.run
./amd-driver-installer-catalyst-12.10-x86.x86_64.run --extract driver
sudo mv /etc/ati/control ~/control.bak
sudo cp driver/common/etc/ati/control /etc/ati

Poor battery life (atieventsd not starting and/or not authenticating)

The atieventsd daemon is a daemon that monitors various acpi events (it does this by connecting with the acpid daemon), such as a laptop lid close, or an AC connect/disconnect, presumably to let the GPU know for reasons of power saving. See the man page for more info. On my system, `Ubuntu 13.10`, and with the latest drivers from Catalyst, 13.12, the daemon installs itself at `/etc/alternatives/x86_64-linux-gnu_atieventsd` with a symlink to that at `/usr/bin/atieventsd`.

The Sys-V-init script, `/etc/init.d/atieventsd` thinks the symlink is elsewhere, namely `/usr/sbin/atieventsd` (i.e. `sbin` not where it actually is, `bin`)

So to launch successfully the `atieventsd` on startup I had to do make the change:

    DAEMONPATH=/usr/bin/atieventsd

Then remove/regenerate the run levels:

   cd /etc/init.d
   mv atieventsd atieventsd.temp
   update-rc.d atieventsd remove
   mv atieventsd.temp atieventsd
   update-rc.d atieventsd defaults

This should now at least allow the daemon to correctly start/stop. You can test with `service atieventsd start`.

On each startup the daemon attempts to launch a script, `/etc/ati/authatieventsd.sh` (by default) , whose purpose is to grant the `atieventsd daemon` authorization access to the X server display, so it can send it various commands.

This script is called by `atieventd` like (see `ps aux | grep atieventsd` after starting the service or booting)

    /etc/ati/authatieventsd.sh grant :0 /tmp/atieventsdGWt098

Here argument one (`$1`) is the action: *grant/revoke* , argument two (`$2`) is the X display number (e.g `:0`), and argument three (`$3`) is the file wanting the authority. See the `xauth` man page for some more background.

The problem is that if you look at the `/etc/ati/authatieventsd.sh` script you will see it does not support `lightdm`, you need to add the chunk of code inside the `GetServerAuthFile()` function:

   #Check lightdm     
    LIGHTDM_AUTH_FILE=/var/run/lightdm/root/$1
    if [ -e $LIGHTDM_AUTH_FILE ]; then
        SERVER_AUTH_FILE=$LIGHTDM_AUTH_FILE
        DISP_SEARCH_STRING="unix$1"
        return 0
    fi

to allow it find the correct server authentication file. Save this and you should see a file in the `/tmp` directory of the form `atieventsdGWt098`, the next time the `atieventd` is stopped/start (or next reboot), and if you do

   xauth -f /tmp/atievntX.Dh1AJV list

you should get something like

   yourHostname/unix:0  MIT-MAGIC-COOKIE-1  98deg034234kkn34234mmm3242

Showing that the daemon has indeed been granted authority.

You can also look at syslog, if you add the `--debug` option to `/etc/init.d/atieventsd` init file DAEMONOPTS options (regen run levels), and you should see everything is now working correctly, and the daemon is responding to events such as unplugging the AC and lid closes. For example:

   <Dbg>: ACPI event: ac_adapter AC 00000080 00000000
   <Dbg>: ACPI event: processor CPU0 00000081 00000000
   processor CPU1 00000081 00000000
   processor CPU2 00000081 00000000
   processor CPU3 00000081 00000000

Maybe this will help extend battery life.

Hang at logout

If you experience hangs when logging out (of X) it is probably due to the /etc/ati/authatieventsd.sh script looking for X authorization files in the wrong place when it starts up. You can kill the hanging authatieventsd.sh processes from a console tty to allow the shutdown of the X server.

Before the following commands verify that /etc/ati/authatieventsd.sh exists after build and install, if not just do: (assuming that the installer is in the directory we used to install)

cd ~/catalyst15.12
sh amd-driver-installer-15.12-x86.x86_64.run --extract driver
sudo cp driver/packages/Ubuntu/dists/quantal/replacements/authatieventsd.sh /etc/ati/authatieventsd.sh
sudo chmod +x /etc/ati/authatieventsd.sh

This problem can be fixed permanently with:

sudo mkdir -p /var/lib/xdm/authdir
sudo ln -s /var/run/xauth /var/lib/xdm/authdir/authfiles

If that doesn't work then you can disable atieventsd with this command:

sudo /usr/sbin/update-rc.d -f atieventsd remove

You'll have to restart for this to take effect.

Can't remove fglrx with dpkg (diversion issue)

If dpkg refuses to remove an fglrx package and complains about a diversion of a file, you might need to manually remove it. For example, if dpkg complains:

dpkg-divert: mismatch on divert-to
  when removing `diversion of /usr/lib/libGL.so.1.2 to /usr/share/fglrx/diversions/libGL.so.1.2 by xorg-driver-fglrx'
  found `diversion of /usr/lib/libGL.so.1.2 to /usr/lib/fglrx/libGL.so.1.2.xlibmesa by xorg-driver-fglrx'

then:

sudo dpkg-divert --remove /usr/lib/libGL.so.1.2

This module/version combo is already installed

If you get this error-message, simply uninstall the previous version before installing the new one with:

sudo dkms remove -m fglrx --all

New kernel installed?

In theory, DKMS should automatically install the fglrx kernel module for your new kernel the first time you boot it. Should you need to manually install it:

sudo dkms build -m fglrx -k `uname -r`
sudo dkms install -m fglrx -k `uname -r`

if amdcccle doesn't work and says Identifier is not a valid word. Use lower case letter in xorg.conf

or specify all the correct parameters. For example:

sudo dkms build -m fglrx -v 9.012 -k 3.5.0-22-generic
sudo dkms install -m fglrx -v 9.012 -k 3.5.0-22-generic

amdconfig not found after installation

This scenario is possible when the driver installation has seemingly succeeded and is possibly related to previous fglrx installs, including those through Jockey (i.e. you first used drivers provided by Ubuntu but then upgraded to ones available from AMD's website). When doing amdconfig --initial after driver installation, you might end up not having the amdconfig available at all:

amdconfig: command not found

After booting you might receive X error '(EE) Failed to load module "fglrx" (module does not exist, 0)'. These do not necessarily indicate that the installation has failed completely. On command line, do

ls /usr/lib/fglrx/bin

and see if the command lists some Ati related programs. If they are listed but not found from /usr/bin, it is possible that the "update-alternatives" fglrx .deb installation does has been ignored. See man update-alternatives for more information about the concept and workings of alternatives. In practice, update-alternatives is supposed to create several symbolic links to the files in the fglrx directory, but it will be ignored if the alternatives for the very related gl_conf entry has been set to manual. Do

update-alternatives --get-selections | grep gl_conf

and see if the mode is manual instead of auto and if mesa is mentioned instead of fglrx in the path that is printed. In this case you need to

sudo update-alternatives --set gl_conf /usr/lib/fglrx/ld.so.conf

to set fglrx as the active alternative. You can alternatively (no pun intended) and additionally change the gl_conf into automatic mode before the installation this way:

sudo update-alternatives --auto gl_conf

After that, the alternatives should automatically be configured correctly when the graphics driver .debs are installed.

"update-alternatives: error" during install

During installation you may receive the following message:

update-alternatives: error: unable to make /usr/lib/xorg/modules/drivers/fglrx_drv.so.dpkg-tmp a symlink to /etc/alternatives/fglrx_drv: No such file or directory

This can be easily solved by creating directory "drivers" under /usr/lib/xorg/modules/

sudo mkdir /usr/lib/xorg/modules/drivers

'Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507.' during deb generation

During installation you may receive the following message:

Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507.

This can happen when your /tmp folder is mounted with the option "noexec". The noexec is suggested by many howtos regarding Ubuntu on SSD, when placing the /tmp in memory. A workaround can be found here: [1]

Black screen after uninstalling old amd drivers

Start you computer in recovery mode and exit to root shell. Remount your partitions in rw mode:

mount -rw -o remount /
...

Go to your download directory and proceed with building and installing the drivers in recovery mode. All should be fine after a reboot.

When fglrx-core conflicts with libopencl1

If you have Wine installed (Linux Mint 17+ no longer ships with Wine by default, but you may have installed it if you tried to use windows software), the driver installation may fail due to a conflict with a library included with Wine.

After you have created or downloaded the .deb files, but before you install them, repackage the fglrx-core package by doing the following

dpkg-deb -R fglrx-core_15.302-0ubuntu1_amd64.deb fglrx-core
sed -ri 's/(Conflicts|Provides).*/\1: fglrx-driver-core/' fglrx-core/DEBIAN/control
sudo dpkg-deb -b fglrx-core/ fglrx-core_15.302-0ubuntu1_amd64.deb

Now continue to install the packages as usual (usually dpkg -i)

"apt upgrade" overwrites the packages you've manually installed

You may find that apt will "upgrade" the version you've installed to the version from an upstream repository. To stop this behavior you can run

sudo apt-mark hold fglrx-dev fglrx-core fglrx fglrx-amdcccle

If you later want to reenable this functionality you can run

sudo apt-mark unhold fglrx-dev fglrx-core fglrx fglrx-amdcccle

References and External Resources




Distribution Neutral Steps

Verifying | Configuring | Troubleshooting