SUSE/openSUSE

From cchtml.com
Revision as of 08:49, 11 November 2007 by 196.207.47.60 (talk) (fix distribution name capitalization SuSE -> SUSE)

General Status

  • Native Installer Support contributed by Stefan Dirsch
  • Repackaged by Flavio Stanchina


Installation

Method 1

  • Install 'kernel-source' and C++ compiler ('gcc') and tools selection in yast.
  • Get the rpm that matches the SUSE X server on your system (XFree86 4.3 or X.Org 6.8) instead of the ATI driver installer from [1]
  • init 3
  • install the driver package (e.g. rpm -Uvh fglrx64_6_8_0-8.24.8-1.x86_64.rpm)
  • configure your X server using ati-xconfig

note: this is not the way described in the READMEs, but it's the way that worked best for me and others. Especially if sax and/or your X server crash when using the ATI driver installer's package (due to missing symbols in fglrx_drv.o)

GUIDE: ATI Installer HOWTO for SUSE/Novell users

http://www.suse.de/~sndirsch/ati-installer-HOWTO.html

ANOTHER Installation Guide (3D Acceleration)

"3D Acceleration for ATI cards (works for SUSE, Mandriva and Debian)" at

linuxhelp.150m.com/ati/ati.htm
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)

YET ANOTHER Installation Guide:

Generally following this guide should help most of you: http://linux.wordpress.com/2006/05/12/suse-101-ati-drivers-installation/

What follows is a slightly simplified version that I've used numerous times without fail.


1. BACKUP your current /etc/X11/xorg.conf file, preferably to your home directory. Now change to a command shell by hitting Ctrl-Alt-F1.


2. Remove any previous versions of the ATI driver by either

If you have installed a previous ATI driver version without using RPM packages (or if you don't know if you have or not), type the following:

cd /usr/share/ati 
sh ./fglrx-uninstall.sh

Otherwise, and even if you've done the above type the following,

rpm -e $(rpm -qa | grep fglrx)


3. Change the directory containing the downloaded ati-driver...run file.


4. Change the permissions of the driver file to executable by typing the following:

chmod +x ./ati-driver...

Use the tab button to complete the rest of the ati-driver... file name.


5. Create a SUSE RPM (info is for 32 bit version) from the file by typing

./ati-driver-installer-*.run --buildpkg SuSE/SUSE101-IA32


6. Install the created fglrx... file by typing

rpm -ivh fglrx_...(hit tab again to get full name)...


7. The following command will update your library cache, you're recommended to run it:

ldconfig


8. Now run the ati config commands:

aticonfig --initial --input=/etc/X11/xorg.conf


9. Now run the Sax2 setup.

sax2 -r -m 0=fglrx

You may wish to alter the refresh rates and DPI info with this, otherwise just hit save. DO NOT hit the test button, it regually crashes my machine when i do...


10. Reboot you machine. Do not use the reboot command, again this messes my machine up on the next boot for whatever reason... try

shutdown -h now


11. Boot up again, and check the new /etc/X11/xorg.conf file, compare it to your old one, and make any changes if you know what you're doing.

Resources


Distribution Neutral Steps

Verifying | Configuring | Troubleshooting