Difference between revisions of "Scientific Linux"

From cchtml.com
Jump to: navigation, search
m (Reverted edits by (Talk); changed back to last version by Mooninite)
Line 1: Line 1:
== Scientific Linux 5.0 ==
== Scientific Linux 5.0 ==

Revision as of 00:08, 31 October 2007

Scientific Linux 5.0

The ATI driver installer ati-driver-installer-8.36.5-x86.x86_64.run has the ability to build RPMs.

ati-driver-installer-8.36.5-x86.x86_64.run --listpkg

shows the packages it can build. There is no RHEL 5 option yet, but I've read somewhere that RHEL5 is based on FC6. Given that I tried to build

ati-driver-installer-8.36.5-x86.x86_64.run --buildpkg Fedora/FC6

and it generated the following RPMs:


fglrx_6_8_0-8.36.5-1.i386.rpm is for 32-bit.

To install these RPMs run

rpm -Uvh ATI-fglrx* kernel-module-ATI-fglrx-2.6.18-8.1.3.el5-8.36.5-1.fc6.x86_64.rpm


aticonfig --initial

and you could try it with:



telinit 5

When you happy with the new driver you need to ensure that you have


in your /etc/inittab and reboot the box. Please note, that SL5.0 installation did not recognise my card: ATI X1600 [Asus A6000KT laptop] so I had no X running and the default init mode was 3 [not 5]. YMMV.

I still do not know how to rebuild the kernel module for the different kernels. By default the kernel module is being build for the current kernel [uname -r] Today was the first security kernel upgrade revision 2.6.18-8.1.4.el5. So after new kernel installation I repeated the same procedure and installed new kernel module with

rpm -ivh kernel-module-ATI-fglrx-2.6.18-8.1.4.el5-8.36.5-1.fc6.x86_64.rpm

Distribution Neutral Steps

Verifying | Configuring | Troubleshooting