Slackware: ATI SlackBuild (ENG): Difference between revisions

From cchtml.com
No edit summary
Line 1: Line 1:
<!-- Per http://wiki.cchtml.com -->
== Introduction ==
== Introduction ==
This wiki explains how to install the proprietary ATI drivers in a Slackware Linux distribution, creating, thanks to a SlackBuild, packages that can be installed through the '''installpkg''' command.<br>
This wiki explains how to install the proprietary ATI drivers in a Slackware Linux distribution, creating, thanks to a SlackBuild, packages that can be installed through the '''installpkg''' command.<br>
This wiki DOES NOT explain how to improve performance. In particular, It provides only a minimal description of how to set up the X.Org server with the only purpose of loading the proprietary drivers (a description on how to configure the X.Org server to increase performance can be found here).  
This wiki DOES NOT explain how to improve performance. In particular, It provides only a minimal description of how to set up the X.Org server with the only purpose of loading the proprietary drivers (a description on how to configure the X.Org server to increase performance can be found here).
All commands starting with a '#' must be executed with root rights, while commands beginning with '$' can be performed by a user without such rights.
All commands starting with a '#' must be executed with root rights, while commands beginning with '$' can be performed by a user without such rights.


== Proprietary ATI Drivers and ATI Catalyst ==
== Proprietary ATI Drivers and ATI Catalyst ==
Since 21 November 2007, ATI drivers have changed the name and the number version. The new drivers, which were first mentioned only as Proprietary ATI Driver, are now called ATI Catalyst. Moreover, the version number has passed from 8.XX.X to 7.XX.  
Since 21 November 2007, ATI drivers have changed the name and the number version. The new drivers, which were first mentioned only as Proprietary ATI Driver, are now called ATI Catalyst. Moreover, the version number has passed from 8.XX.X to 7.XX.


When in this wiki we will talk about drivers version <8.37.6, we will refer implicitly to the old driver, such as Proprietary ATI Driver, while the new ATI Catalyst have a number version >= 8.37.6, even if, for instance, have a release number 7.11.
When in this wiki we will talk about drivers version <8.37.6, we will refer implicitly to the old driver, such as Proprietary ATI Driver, while the new ATI Catalyst have a number version >= 8.37.6, even if, for instance, have a release number 7.11.
Line 11: Line 13:
== Getting all the necessary ==
== Getting all the necessary ==
The proprietary ATI drivers can be downloaded from the [http://ati.amd.com/support/driver.html  official web site], after selecting the Linux x86 operating system  (or Linux x86_64) and selecting your video card, pressing the “go” button takes you directly into the download page from which you can download the installer (which henceforth we call installer.run).<br>
The proprietary ATI drivers can be downloaded from the [http://ati.amd.com/support/driver.html  official web site], after selecting the Linux x86 operating system  (or Linux x86_64) and selecting your video card, pressing the “go” button takes you directly into the download page from which you can download the installer (which henceforth we call installer.run).<br>
Since drivers also contain a kernel module which will be compiled directly on your system, you'll need the kernel source currently installed in the system as well.  
Since drivers also contain a kernel module which will be compiled directly on your system, you'll need the kernel source currently installed in the system as well.


   '''NOTE:''' Drivers for x86 and x86_64 architectures are equivalent.<br>
   '''NOTE:''' Drivers for x86 and x86_64 architectures are equivalent.<br>
   The installer '''contains files for both architectures''', then It will be the compilation process and the package  
   The installer '''contains files for both architectures''', then It will be the compilation process and the package
   creation process to choose the appropriate files.  
   creation process to choose the appropriate files.
   This means that '''the SlackBuild will be good for Slackware and for Slackware 64-bit portings (Slamd64, Bluewhite64, etc. ...)'''.
   This means that '''the SlackBuild will be good for Slackware and for Slackware 64-bit portings (Slamd64, Bluewhite64, etc. ...)'''.


Line 24: Line 26:
The packages creation follows two different ways depending on whether you use the official driver version '''< 8.37.6''' or '''>= 8.37.6'''. or new '''ATI Catalyst'''. The first way uses what is called '''external SlackBuild''' while the second way what we will call '''internal SlackBuild'''. In both cases the two packages will be created and they can be installed by Slackware '''installpkg''' utility. So let's see the two cases saying that the program that here is called installer.run is the installer  downloaded from ATI web site.
The packages creation follows two different ways depending on whether you use the official driver version '''< 8.37.6''' or '''>= 8.37.6'''. or new '''ATI Catalyst'''. The first way uses what is called '''external SlackBuild''' while the second way what we will call '''internal SlackBuild'''. In both cases the two packages will be created and they can be installed by Slackware '''installpkg''' utility. So let's see the two cases saying that the program that here is called installer.run is the installer  downloaded from ATI web site.


   '''NOTE:''' The external SlackBuild use is not limited to the driver <8.37.6 but you can use it  
   '''NOTE:''' The external SlackBuild use is not limited to the driver <8.37.6 but you can use it
   (and at times we will see that It's the only alternative) with all versions of ATI drivers.
   (and at times we will see that It's the only alternative) with all versions of ATI drivers.


Line 30: Line 32:
For these types of drivers I've created an '''external SlackBuild''' for Slackware and I made a package that can be found at: http://www.cli.di.unipi.it/~tomasi/ati-slack-packager/ati-slack-packager-current-noarch-1.tgz
For these types of drivers I've created an '''external SlackBuild''' for Slackware and I made a package that can be found at: http://www.cli.di.unipi.it/~tomasi/ati-slack-packager/ati-slack-packager-current-noarch-1.tgz
To create Slackware packages simply run:
To create Slackware packages simply run:
   # installpkg ati-slack-packager-current-noarch-1.tgz  
   # installpkg ati-slack-packager-current-noarch-1.tgz
   # sh installer.run -- buildpkg custom-package/Slackware
   # sh installer.run -- buildpkg custom-package/Slackware


Line 47: Line 49:


=== Creating only fglrx-module package ===
=== Creating only fglrx-module package ===
To create just the package containing the kernel module for the currently installed kernel, simply run the installer with the ''Only_Module'' option  
To create just the package containing the kernel module for the currently installed kernel, simply run the installer with the ''Only_Module'' option
So with '''external SlackBuild''':
So with '''external SlackBuild''':
   # sh installer.run --buildpkg custom-package/Only_Module
   # sh installer.run --buildpkg custom-package/Only_Module
Line 57: Line 59:
With '''external SlackBuild''':
With '''external SlackBuild''':
   # sh installer.run --buildpkg custom-package/Only_X
   # sh installer.run --buildpkg custom-package/Only_X
With '''internal SlackBuild''':  
With '''internal SlackBuild''':
   # sh installer.run --buildpkg Slackware/Only_X
   # sh installer.run --buildpkg Slackware/Only_X


Line 88: Line 90:
         Group  0
         Group  0
         Mode    0666
         Mode    0666
   EndSection  
   EndSection
</tt>
</tt>


== Installation checking ==
== Installation checking ==
To see if proprietary ATI drivers are properly installed run the command:  
To see if proprietary ATI drivers are properly installed run the command:
   $ fglrxinfo
   $ fglrxinfo
On my computer the output is:  
On my computer the output is:
   display::0.0  screen: 0
   display::0.0  screen: 0
   OpenGL vendor string: ATI Technologies Inc.
   OpenGL vendor string: ATI Technologies Inc.
Line 101: Line 103:


== Remove installed packages ==
== Remove installed packages ==
To remove installed packages you can use the '''removepkg''' utility. However, there are aspects that should be considered:  
To remove installed packages you can use the '''removepkg''' utility. However, there are aspects that should be considered:
* The packages' removing don't delete fglrx's driver configuration files, these files are located in ''/etc/ati'' directory
* The packages' removing don't delete fglrx's driver configuration files, these files are located in ''/etc/ati'' directory
   '''NOTE:''' The /etc/ati/custom-package directory, if exists, contains the external SlackBuild and therefore should not be deleted.
   '''NOTE:''' The /etc/ati/custom-package directory, if exists, contains the external SlackBuild and therefore should not be deleted.
Line 152: Line 154:


== Using GLX_SGIX_pbuffer FGLTexMgr: open of shared memory object failed (Permission denied) __FGLTexMgrCreateObject: __FGLTexMgrSHMmalloc failed!!! ==
== Using GLX_SGIX_pbuffer FGLTexMgr: open of shared memory object failed (Permission denied) __FGLTexMgrCreateObject: __FGLTexMgrSHMmalloc failed!!! ==
This problem is due to the lack of SHM filesystem (now called tmpfs), that is virtual memory filesystem. To work around this problem you must:  
This problem is due to the lack of SHM filesystem (now called tmpfs), that is virtual memory filesystem. To work around this problem you must:
* Add into ''/etc/fstab'' file the following line:
* Add into ''/etc/fstab'' file the following line:
   shm /dev/shm tmpfs defaults 0 0  
   shm /dev/shm tmpfs defaults 0 0
* Then mount the filesystem through:  
* Then mount the filesystem through:
   # mount /dev/shm  
   # mount /dev/shm
Obviously the kernel must be predisposed for the "mounting" of this filesystem, in particular the
Obviously the kernel must be predisposed for the "mounting" of this filesystem, in particular the
kernel option that must be enabled is '''CONFIG_TMPFS''' that is generally placed in '''File system --> Pseudo filesystems''' submenu. However all the compiled kernel generally have this option enabled.
kernel option that must be enabled is '''CONFIG_TMPFS''' that is generally placed in '''File system --> Pseudo filesystems''' submenu. However all the compiled kernel generally have this option enabled.
Line 174: Line 176:
/lib/modules/`uname -r`/build<br>
/lib/modules/`uname -r`/build<br>
don't point to the directory where are inserted the current kernel sources (which is generally ''/usr/src/linux- 'uname-r'''). It happens to those who use a kernel contained in Slackware, so I will try to explain It in terms of Slackware "packages". This can happen:
don't point to the directory where are inserted the current kernel sources (which is generally ''/usr/src/linux- 'uname-r'''). It happens to those who use a kernel contained in Slackware, so I will try to explain It in terms of Slackware "packages". This can happen:
* because the kernel source were not installed. In this case should be enough to install the source package which can be found in Slackware k/ directory. However, It is not granted that the problem will be solved, You'll need to see the second reason why there is an error.  
* because the kernel source were not installed. In this case should be enough to install the source package which can be found in Slackware k/ directory. However, It is not granted that the problem will be solved, You'll need to see the second reason why there is an error.
* because sources (also if installed) do not reflect the settings of the current kernel. The new Slackware 12 has some precompiled  kernels (which means different settings), while just a single package for the sources (unless seeing the branch extra/). In particular, the sources are for the SMP kernel and so if you use a non-SMP kernel can appear this error. To avoid this, after making sure that the package source has been installed, do simply the following:
* because sources (also if installed) do not reflect the settings of the current kernel. The new Slackware 12 has some precompiled  kernels (which means different settings), while just a single package for the sources (unless seeing the branch extra/). In particular, the sources are for the SMP kernel and so if you use a non-SMP kernel can appear this error. To avoid this, after making sure that the package source has been installed, do simply the following:
   # cd /usr/src/linux
   # cd /usr/src/linux
Line 183: Line 185:
This "bug" in 8.39.4 drivers results from the fact that ATI developers don't update the packager maintainers before the official releases. It should be nice first if they did test us official releases in order to certify the proper functioning of the scripts for creating packages. To solve the problem It's necessary to use the external SlackBuild as described here.
This "bug" in 8.39.4 drivers results from the fact that ATI developers don't update the packager maintainers before the official releases. It should be nice first if they did test us official releases in order to certify the proper functioning of the scripts for creating packages. To solve the problem It's necessary to use the external SlackBuild as described here.
== amdcccle don't start on slackware 12 ==
== amdcccle don't start on slackware 12 ==
Many users of the X.Org 7.2 (or 1.3) server version fail to start properly the Catalyst. The command to run the Catalyst is:  
Many users of the X.Org 7.2 (or 1.3) server version fail to start properly the Catalyst. The command to run the Catalyst is:
   # amdcccle
   # amdcccle
For this problem it seems there is no solution yet, but we are working on to solve it.
For this problem it seems there is no solution yet, but we are working on to solve it.
Line 196: Line 198:


= Conclusion =
= Conclusion =
Proprietary ATI drivers for many modern desktop and notebook PC seems are almost the only alternative to the use of 3d acceleration with linux. Unfortunately ATI developers don't make back porting and then users using drivers' version older than 8.37.6 will never go to X.Org server version 7.2 (or 1.3) or later. Let's hope that Mesa drivers can also be used for these cards.  
Proprietary ATI drivers for many modern desktop and notebook PC seems are almost the only alternative to the use of 3d acceleration with linux. Unfortunately ATI developers don't make back porting and then users using drivers' version older than 8.37.6 will never go to X.Org server version 7.2 (or 1.3) or later. Let's hope that Mesa drivers can also be used for these cards.
The '''external SlackBuild''' is deprecated because now the ''internal slackbuild'' can apply patch natively. Also, because It hasn't been tested the SlackBuild with all possible versions of ATI drivers and kernels, It could happen that the module compilation fails. If so, feel free to write me at '''spina80@gmail.com''' posting me the output generated by Only_Module option.
The '''external SlackBuild''' is deprecated because now the ''internal slackbuild'' can apply patch natively. Also, because It hasn't been tested the SlackBuild with all possible versions of ATI drivers and kernels, It could happen that the module compilation fails. If so, feel free to write me at '''tomasiATcliDOTdiDOTunipiDOTit''' posting me the output generated by Only_Module option.

Revision as of 21:38, 12 October 2010


Introduction

This wiki explains how to install the proprietary ATI drivers in a Slackware Linux distribution, creating, thanks to a SlackBuild, packages that can be installed through the installpkg command.
This wiki DOES NOT explain how to improve performance. In particular, It provides only a minimal description of how to set up the X.Org server with the only purpose of loading the proprietary drivers (a description on how to configure the X.Org server to increase performance can be found here). All commands starting with a '#' must be executed with root rights, while commands beginning with '$' can be performed by a user without such rights.

Proprietary ATI Drivers and ATI Catalyst

Since 21 November 2007, ATI drivers have changed the name and the number version. The new drivers, which were first mentioned only as Proprietary ATI Driver, are now called ATI Catalyst. Moreover, the version number has passed from 8.XX.X to 7.XX.

When in this wiki we will talk about drivers version <8.37.6, we will refer implicitly to the old driver, such as Proprietary ATI Driver, while the new ATI Catalyst have a number version >= 8.37.6, even if, for instance, have a release number 7.11.

Getting all the necessary

The proprietary ATI drivers can be downloaded from the official web site, after selecting the Linux x86 operating system (or Linux x86_64) and selecting your video card, pressing the “go” button takes you directly into the download page from which you can download the installer (which henceforth we call installer.run).
Since drivers also contain a kernel module which will be compiled directly on your system, you'll need the kernel source currently installed in the system as well.

 NOTE: Drivers for x86 and x86_64 architectures are equivalent.
The installer contains files for both architectures, then It will be the compilation process and the package creation process to choose the appropriate files. This means that the SlackBuild will be good for Slackware and for Slackware 64-bit portings (Slamd64, Bluewhite64, etc. ...).

Important notice

If the downloaded driver version is less than 8.37.6, then you need to know from now that it will not work onto X.Org 7.2 server (or 1.3) or later.

How to create Slackware packages

The packages creation follows two different ways depending on whether you use the official driver version < 8.37.6 or >= 8.37.6. or new ATI Catalyst. The first way uses what is called external SlackBuild while the second way what we will call internal SlackBuild. In both cases the two packages will be created and they can be installed by Slackware installpkg utility. So let's see the two cases saying that the program that here is called installer.run is the installer downloaded from ATI web site.

 NOTE: The external SlackBuild use is not limited to the driver <8.37.6 but you can use it
 (and at times we will see that It's the only alternative) with all versions of ATI drivers.

Drivers version <8.37.6 (external SlackBuild)

For these types of drivers I've created an external SlackBuild for Slackware and I made a package that can be found at: http://www.cli.di.unipi.it/~tomasi/ati-slack-packager/ati-slack-packager-current-noarch-1.tgz To create Slackware packages simply run:

 # installpkg ati-slack-packager-current-noarch-1.tgz
 # sh installer.run -- buildpkg custom-package/Slackware

Drivers version >= 8.37.6 or new ATI Catalyst (internal SlackBuild)

For these drivers I've sent the SlackBuild directly to ATI which inserted it into the installer, then simply run:

 # sh installer.run --buildpkg Slackware/All

or, if drivers are quite recent, it suffices:

 # sh installer.run --buildpkg

Otherwise, in order to create and install directly the packages you can use (always with recent versions of the driver):

 # sh installer.run --buildandinstallpkg

此处的意思是:如果是新装的系统,直接运行本处的最后一个命令即可同时完成创建包和安装包的过程。

What do created packages contain?

The two packages created by SlackBuild, that we'll call fglrx-module and fglrx-x contain, respectively, the kernel module and the X.Org server driver currently installed in the system. In this way, if you upgrade the kernel or the X.Org server, you can create only one package.

Creating only fglrx-module package

To create just the package containing the kernel module for the currently installed kernel, simply run the installer with the Only_Module option So with external SlackBuild:

 # sh installer.run --buildpkg custom-package/Only_Module

With internal SlackBuild:

 # sh installer.run --buildpkg Slackware/Only_Module

Creating only fglrx-x package

To create just the package containing the X.Org driver currently installed in your system, simply run installer with Only_X option With external SlackBuild:

 # sh installer.run --buildpkg custom-package/Only_X

With internal SlackBuild:

 # sh installer.run --buildpkg Slackware/Only_X

(如果进行了上一小节的 --buildandinstallpkg则本小节的命令可不必再执行)

接下来,执行

 # sh installer.run

即可进入ATI配置的界面,完成显卡的简单配置。

Minimal X.Org server configuration

Once installed the two indicated packages, you must tell to the X.Org server to use ATI proprietary drivers, to do this we must check if the xorg.conf file, which is usually located in the /etc/X11/ directory, contains the following items:

 Section "Module"
       ...
       Load    "dri"
       Load    "glx"
       ...
 EndSection
 Section "Device"
       ...
       Driver  "fglrx"
       ...
 EndSection
 Section "DRI"
       Group   0
       Mode    0666
 EndSection

Installation checking

To see if proprietary ATI drivers are properly installed run the command:

 $ fglrxinfo

On my computer the output is:

 display::0.0  screen: 0
 OpenGL vendor string: ATI Technologies Inc.
 OpenGL renderer string: ATI Mobility Radeon X1400
 OpenGL version string: 2.0.6650 (8.39.4)

Remove installed packages

To remove installed packages you can use the removepkg utility. However, there are aspects that should be considered:

  • The packages' removing don't delete fglrx's driver configuration files, these files are located in /etc/ati directory
 NOTE: The /etc/ati/custom-package directory, if exists, contains the external SlackBuild and therefore should not be deleted.
  • The fglrx-x package contains ATI's OpenGL libraries, and these libraries are located in the same directory of the Mesa libraries, so when you install the fglrx-x package Mesa OpenGL libraries are overridden. To restore the situation you should simply reinstall the package containing these libraries, like:

  x11
for slackware 11, or:
  mesa
for slackware 12.

Patching the drivers

Ati drivers are usually not compatible with brand new version of kernel linux. You often need to patch the driver so that you can create the kernel module successfully. Since Ati Catalyst > 8.11 you can patch Ati drivers within the "internal slackbuild" before that same slackbuild compiles the kernel module.


In order to do that, you just have to create (or download from the Internet) a patch and rename it like this:
/etc/ati/patch/patch-ATI_DRIVER_VERSION-KERNEL_VERSION
where
ATI_DRIVER_VERSION must be equal to the output of:

$ sh installer.run -i | head -n1 | cut -d'-' -f2

KERNEL_VERSION must be equal to the output of:

uname -r

If /etc/ati/patch doesn't exist, it must be made.


For example, if the former command outputs "8.55" and the latter "2.6.27.6", you need to name the patch /etc/ati/patch/patch-8.56-2.6.27.6.

The internal slackbuild will find the patch automatically and, if the command patch is installed, it will run:

# patch -p0 < /etc/ati/patch/patch-8.56-2.6.27.6


Known problems

FATAL: modpost: GPL-incompatible module fglrx.ko uses GPL-only symbol 'paravirt_ops'

The error occurs during module compilation and It's due to the fact that the kernel was compiled with the option of paravirtualization active. This option among other things, prevents to load, and then to compile, modules that do not have the GPL license. Since that ATI drivers don't have this type of license, they aren't compiled.
To work around this problem you can:

Disable kernel paravirtualization option

The paravirtualization option is called CONFIG_PARAVIRT and generally is in the Processor type and features kernel submenu.

Patch ATI drivers

This operation is illegal because It changes the type of license issued by ATI in a GPL license. I wrote the ati_to_gpl.patch (md5sum: 4207f41a71035dc2eed3ea9346b881bb) patch but I do not take any responsibility, I do not use It and I discourage the use in order to prefer the alternative to disable the paravirtualization kernel option. To use this patch You need to:
External slackbuild

  • Copy the patch in the /etc/ati/custom-package/patch directory

Internal slackbuild (only with Ati Catalyst > 8.11)

  • Copy the patch in the /etc/ati/patch directory (if it doesn't exist you must create it)

The SlackBuild will find and apply the patch automatically. In order to uninstall it you simply need to delete it.

In order to uninstall the patch simply delete It from /etc/ati/custom-package/patch directory.

Using GLX_SGIX_pbuffer FGLTexMgr: open of shared memory object failed (Permission denied) __FGLTexMgrCreateObject: __FGLTexMgrSHMmalloc failed!!!

This problem is due to the lack of SHM filesystem (now called tmpfs), that is virtual memory filesystem. To work around this problem you must:

  • Add into /etc/fstab file the following line:
 shm		/dev/shm		tmpfs		defaults	0	0
  • Then mount the filesystem through:
 # mount /dev/shm

Obviously the kernel must be predisposed for the "mounting" of this filesystem, in particular the kernel option that must be enabled is CONFIG_TMPFS that is generally placed in File system --> Pseudo filesystems submenu. However all the compiled kernel generally have this option enabled.

kernel includes at /lib/modules/`uname -r`/build/include do not match current kernel

The complete mistake is something like this:

 Error:
 kernel includes at /lib/modules/`uname -r`/build/include do not match current kernel.
 they are versioned as ""
 instead of "`uname -r`".
 you might need to adjust your symlinks:
 - /usr/include
 - /usr/src/linux

The error, also if explained, could be not clear. In practice It results from the fact that the symbolic link:
/lib/modules/`uname -r`/source
/lib/modules/`uname -r`/build
don't point to the directory where are inserted the current kernel sources (which is generally /usr/src/linux- 'uname-r'). It happens to those who use a kernel contained in Slackware, so I will try to explain It in terms of Slackware "packages". This can happen:

  • because the kernel source were not installed. In this case should be enough to install the source package which can be found in Slackware k/ directory. However, It is not granted that the problem will be solved, You'll need to see the second reason why there is an error.
  • because sources (also if installed) do not reflect the settings of the current kernel. The new Slackware 12 has some precompiled kernels (which means different settings), while just a single package for the sources (unless seeing the branch extra/). In particular, the sources are for the SMP kernel and so if you use a non-SMP kernel can appear this error. To avoid this, after making sure that the package source has been installed, do simply the following:
 # cd /usr/src/linux
 # cp /boot/config .config
 # make

running make, in addition to compiling the kernel modules (which we will not use), some header files are regenerated, and they will reflect the kernel configuration (as it's set in the .config file).

This "bug" in 8.39.4 drivers results from the fact that ATI developers don't update the packager maintainers before the official releases. It should be nice first if they did test us official releases in order to certify the proper functioning of the scripts for creating packages. To solve the problem It's necessary to use the external SlackBuild as described here.

amdcccle don't start on slackware 12

Many users of the X.Org 7.2 (or 1.3) server version fail to start properly the Catalyst. The command to run the Catalyst is:

 # amdcccle

For this problem it seems there is no solution yet, but we are working on to solve it.

Useful links

The discussion thread from which it was derived this article:
http://www.slacky.eu/forum/viewtopic.php?t=18134&highlight=
An alternative to official ATI drivers is given by the following website:
http://www.schneider-digital.de/
A wiki in italian about installing and configuring ATI drivers (open source and proprietary) can be found at: http://www.slacky.eu/wikislack/index.php?title=Installazione_driver_ATI_su_Slackware_GNU/Linux

Conclusion

Proprietary ATI drivers for many modern desktop and notebook PC seems are almost the only alternative to the use of 3d acceleration with linux. Unfortunately ATI developers don't make back porting and then users using drivers' version older than 8.37.6 will never go to X.Org server version 7.2 (or 1.3) or later. Let's hope that Mesa drivers can also be used for these cards. The external SlackBuild is deprecated because now the internal slackbuild can apply patch natively. Also, because It hasn't been tested the SlackBuild with all possible versions of ATI drivers and kernels, It could happen that the module compilation fails. If so, feel free to write me at tomasiATcliDOTdiDOTunipiDOTit posting me the output generated by Only_Module option.