Slackware Installation Guide: Difference between revisions

From cchtml.com
(XrXRmNsfDLXA)
m (Protected "Slackware Installation Guide": Excessive spamming ([edit=autoconfirmed] (indefinite) [move=autoconfirmed] (indefinite)))
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Benutzt  Mozilla Firefox 2.0.0.3 auf    Windows XPHab gedrae auch einen neuen PC gebaut (Spiele PC f r den Bruder mit nForce 520 und GF8800 GTS320) Ich hab einen 5000+ mit 65nm genommen. Die Modelle mit 2MB L2 Cache sind nicht zu empfehlen. Die verbrauchen erheblich mehr Strom, sie werden w rmer, sie kosten mehr Geld (auch wenn nicht wirklich viel mehr) und sie bringen kaum Mehrleistung. Also nimm am besten den 5000+ oder den 5400+ .Mein Vater nutzt ein Mobo mit GF6100. Selbst seine CAD Programme lassen sich (bei nicht allzu vielen Teilen) gut und fl ssig bedienen. F r relativ anspruchslose Dinge wie Aero oder Beryl (meinetwegen auch XGL) d rfte die auch reichen. Das mit dem RAM ist aber wiederum ein Argument.
First, note that I don't like kernel 2.4, and don't use it. Therefore this FAQ will for the most part assume you've updated your kernels along with the rest of us. (By default, Slackware 10.2 ships with 2.4.30). This shouldn't cause any descrepencies, as fglrx will work with a 2.4 or 2.6 kernel; however, if you can't get acceleration on the older kernel series, my suggestion is to update! My own reasons for doing so are mainly stability related; having relatively modern hardware, the previous-gen kernel just doesn't like my computer very much. But now I digress...let's get to it.
 
First and foremost; check [http://www.linuxpackages.net www.linuxpackages.net]. In theory, they have a man there who beta-tests and packages flgrx for Slackware. In practice, fglrx hasn't been updated on that site, as of this writing (2005-11-12), since Slackware 10.1 and fglrx 8.16. Still, there's always the off-chance that the slacker (pun not intended...okay, maybe it was ;) has updated them; so check there first, and use them if they are up-to-date. They can be installed quite simply.
 
installpkg ati-fglrx*.tgz
 
Now follow the below procedure.
 
Please keep in mind that you'll need your kernel source and kernel headers installed. So if you're like me custom compile the kernel, then you're fine. If you get a pre-built one (anything from the Slackware site, or anything that comes with a default slackware install), then you're going to have to download the corresponding source code. Version numbers must match exactly; also, you must have GCC 3.3 libraries installed (if you've upgraded to GCC 3.4, make sure cxxlibs is installed).
 
So, assuming you've got the relevant file from the ATI site, let's install this sucker.
 
rpm2targz fglrx*.rpm ( or rpm2tgz fglrx*.rpm to get a .tgz file that pkgtools can install )
tar -xvzf fglrx*.tar.gz -C /
cd /lib/modules/fglrx/build_mod
sh make.sh
sh ../make_install.sh
aticonfig --initial
 
Now, add this line to /etc/fstab
 
tmpfs    /dev/shm          tmpfs        defaults            0 0
 
And just reboot:
 
reboot
 
After that, you're golden. Or should be, at least. Verify you've got hardware rendering by typing in:
 
fglrxinfo
 
If it says yes,then use the [http://www.ukulc.com/ language translation] and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. So, good luck with your wanderings, Slacker!
 
[[Category:Installation Documentation]]

Latest revision as of 02:44, 16 May 2012

First, note that I don't like kernel 2.4, and don't use it. Therefore this FAQ will for the most part assume you've updated your kernels along with the rest of us. (By default, Slackware 10.2 ships with 2.4.30). This shouldn't cause any descrepencies, as fglrx will work with a 2.4 or 2.6 kernel; however, if you can't get acceleration on the older kernel series, my suggestion is to update! My own reasons for doing so are mainly stability related; having relatively modern hardware, the previous-gen kernel just doesn't like my computer very much. But now I digress...let's get to it.

First and foremost; check www.linuxpackages.net. In theory, they have a man there who beta-tests and packages flgrx for Slackware. In practice, fglrx hasn't been updated on that site, as of this writing (2005-11-12), since Slackware 10.1 and fglrx 8.16. Still, there's always the off-chance that the slacker (pun not intended...okay, maybe it was ;) has updated them; so check there first, and use them if they are up-to-date. They can be installed quite simply.

installpkg ati-fglrx*.tgz

Now follow the below procedure.

Please keep in mind that you'll need your kernel source and kernel headers installed. So if you're like me custom compile the kernel, then you're fine. If you get a pre-built one (anything from the Slackware site, or anything that comes with a default slackware install), then you're going to have to download the corresponding source code. Version numbers must match exactly; also, you must have GCC 3.3 libraries installed (if you've upgraded to GCC 3.4, make sure cxxlibs is installed).

So, assuming you've got the relevant file from the ATI site, let's install this sucker.

rpm2targz fglrx*.rpm ( or rpm2tgz fglrx*.rpm to get a .tgz file that pkgtools can install )
tar -xvzf fglrx*.tar.gz -C /
cd /lib/modules/fglrx/build_mod
sh make.sh
sh ../make_install.sh
aticonfig --initial

Now, add this line to /etc/fstab

tmpfs     /dev/shm           tmpfs        defaults            0 0

And just reboot:

reboot

After that, you're golden. Or should be, at least. Verify you've got hardware rendering by typing in:

fglrxinfo

If it says yes,then use the language translation and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. So, good luck with your wanderings, Slacker!