TV Out: Difference between revisions

From cchtml.com
(TV-out for legacy ATI cards using GATOS)
 
Line 28: Line 28:
     wget http://megahurts.dk/rune/stuff/xorg7.1-6.6.3-tv_output.patch.gz   
     wget http://megahurts.dk/rune/stuff/xorg7.1-6.6.3-tv_output.patch.gz   
     wget http://xorg.freedesktop.org/releases/individual/driver/xf86-video-ati-6.6.3.tar.bz2
     wget http://xorg.freedesktop.org/releases/individual/driver/xf86-video-ati-6.6.3.tar.bz2
 
Note the above command is very wide, make sure you copy it all.




Next, patch the driver
Next, patch the driver


     tar xjvf xf86-video-ati-6.6.3.tar.bz2 gunzip -c xorg7.1-6.6.3-tv_output.patch.gz | patch -p1 -d xf86-video-ati-6.6.3
     tar xjvf xf86-video-ati-6.6.3.tar.bz2  
 
    gunzip -c xorg7.1-6.6.3-tv_output.patch.gz | patch -p1 -d xf86-video-ati-6.6.3




Line 50: Line 50:
     sudo make install
     sudo make install


Note, using "sudo" will cause the terminal to ask for your password.




Line 93: Line 94:
Then press CTRL+ALT+Backspace to restart X.  If all went well, you should come back up to the login screen and your TV-out should be working fine.
Then press CTRL+ALT+Backspace to restart X.  If all went well, you should come back up to the login screen and your TV-out should be working fine.


Note, the cable to your TV should be plugged in when you boot up the PC.




Thanx goes out to dlg from the ubuntu forums for posting this on the thread found  [http://ubuntuforums.org/showthread.php?t=215763 here.]  Any problems or requests for modification should be directed to that thread.


 
----
Thanx goes out to dlg from the ubuntu forums for posting this on the thread found  [http://ubuntuforums.org/showthread.php?t=215763 here.]
Note, the cable to your TV should be plugged in when you boot up the PC.
----

Revision as of 00:24, 22 January 2007

The following guide is for Ubuntu Edgy

If you are having trouble getting TV-Out functionality on a Radeon graphics card below Radeon 9500, the following instructions may help you.

Try these instructions if: Installing the proprietary drivers gives you a "high gamma" or "washed out" looking screen whenever the TV jack on card is in use at boot-time.

This process modifies the Xorg drivers with a TV-out patch.

First, install driver and other needed packages. Copy/enter the following into the terminal.

  sudo apt-get install build-essential libdrm-dev mesa-common-dev \
  render-dev x11proto-core-dev x11proto-fonts-dev x11proto-gl-dev \
  x11proto-randr-dev x11proto-video-dev x11proto-xext-dev \
  x11proto-xf86dri-dev x11proto-xf86misc-dev x11proto-xinerama-dev \
  xserver-xorg-dev


Second, use wget in terminal to download the driver and patch

    mkdir ~/ati cd ~/ati 
    wget http://megahurts.dk/rune/stuff/xorg7.1-6.6.3-tv_output.patch.gz  
    wget http://xorg.freedesktop.org/releases/individual/driver/xf86-video-ati-6.6.3.tar.bz2

Note the above command is very wide, make sure you copy it all.


Next, patch the driver

    tar xjvf xf86-video-ati-6.6.3.tar.bz2 
    gunzip -c xorg7.1-6.6.3-tv_output.patch.gz | patch -p1 -d xf86-video-ati-6.6.3


Next, configure, build and install the driver

   cd xf86-video-ati-6.6.3 export XORG_PREFIX="/usr" export    
   XORG_CONFIG="--prefix=$XORG_PREFIX --sysconfdir=/etc --localstatedir=/var" 
   ./configure $XORG_CONFIG --with-xorg-module-dir=$XORG_PREFIX/lib/xorg/modules  
   make

then

   sudo make install

Note, using "sudo" will cause the terminal to ask for your password.


Lastly, tweak xorg.conf by entering

    sudo gedit /etc/X11/xorg.conf

and editing it with the following changes, note the specified lines:

 Section "Device"
    Identifier "<YOUR CARD NAME HERE>"
    Driver "ati"                #<---------Important line here
    BusID "PCI:1:0:0" 
    Option "TVOutput" "NTSC"    #<---------Important line here
 EndSection


 Section "Monitor" 
    Identifier "SyncMaster" 
    HorizSync 30 - 50           #<---------Important line here
    VertRefresh 60 - 60         #<---------Important line here
    Option "DPMS" 
 EndSection



 Section "Screen" 
    Identifier "Default Screen" 
    Device "<YOUR CARD NAME HERE>" 
    Monitor "SyncMaster" 
    DefaultDepth 24             #<---------Important line here
    SubSection "Display"        #<---------Important line here
         Depth 24               #<---------Important line here
         Modes "800x600"        #<---------Important line here
    EndSubSection               #<---------Important line here
 EndSection


After this point, check for any typos, and save the file.

Then press CTRL+ALT+Backspace to restart X. If all went well, you should come back up to the login screen and your TV-out should be working fine.


Thanx goes out to dlg from the ubuntu forums for posting this on the thread found here. Any problems or requests for modification should be directed to that thread.


Note, the cable to your TV should be plugged in when you boot up the PC.