Talk:Fedora 16 Installation Guide
From cchtml.com
Followed the direction on this page. I'm running a newer lap top (HP dv7-6157nr) with an Intel and Radeon HD 6700M graphics. Machine runs really hot running every distribution of linux, runs cool on Windows 7. When I do a acpi -V I get the following:
# acpi -V Battery 0: Unknown, 100% Battery 0: design capacity 7600 mAh, last full capacity 7485 mAh = 98% Adapter 0: on-line Thermal 0: ok, 68.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 99.0 degrees C Thermal 0: trip point 1 switches to mode hot at temperature 97.0 degrees C Cooling 0: LCD 10 of 10 Cooling 1: LCD 10 of 10 Cooling 2: Processor 0 of 29 Cooling 3: Processor 0 of 29 Cooling 4: Processor 0 of 29 Cooling 5: Processor 0 of 29 Cooling 6: Processor 0 of 29 Cooling 7: Processor 0 of 29 Cooling 8: Processor 0 of 29 Cooling 9: Processor 0 of 29
The cooling on LCD seems bad (10 of 10 sounds bad) So I wanted to see if the ATI drivers might make a difference, but I'm running into the following and need a little help.
[root@chromium ati]# cat fglrx-install.log Uninstalling any previously installed drivers. Unloading radeon module... Unloading drm module... ERROR: Module drm is in use by i915,ttm,drm_kms_helper [Message] Kernel Module : Trying to install a precompiled kernel module. [Message] Kernel Module : Precompiled kernel module version mismatched. [Error] Kernel Module : Kernel module build environment not found - please consult readme. [Reboot] Kernel Module : dracut
Where is this readme file? It's not in the directory.
