Talk:Ubuntu Dapper Installation Guide: Difference between revisions

From cchtml.com
(acessory for notebook)
(spam removed)
Line 57: Line 57:


I have a strange problem with the ModeLine. It works when i use the ModeLine for the nx7010, but only the default resolution of 1680x1050. When i choose a lower resolution for example 1024x768 the screen is not useable. Can somebody help me? I have testet some ModeLine generaters, but nothing works.
I have a strange problem with the ModeLine. It works when i use the ModeLine for the nx7010, but only the default resolution of 1680x1050. When i choose a lower resolution for example 1024x768 the screen is not useable. Can somebody help me? I have testet some ModeLine generaters, but nothing works.
== acessory for notebook ==
Hello my name Romson, at last year I change two notebooks.
Make by asus and hp, P4 corel duo and Athlon Mobile x2 1gb ram on it. Notebook is different in cool
features and similar in bad featurel... this notebook very hot after 5 hour work :(
In last months I buy cooler pedestal from thermal take.. and I very surprize how this cooler work!
I have site with some links to some shop with cheap notebooks and how I thinks best
notebook accessory.
here is links:
[url=http://notebook-accessory.freehost.se/notebook-accessory.html]notebook accessory[/url]
[url=http://notebook-accessory.freehost.se/computer cheap-notebook-computer.html]cheap notebook[/url]
[url=http://notebook-accessory.freehost.se/buy-notebook.html]buy notebook[/url]
[url=http://notebook-accessory.freehost.se/cases notebook-cases.html]notebook [/url]
[url=http://notebook-accessory.freehost.se/hp-notebook.html]hp notebook[/url]
[url=http://notebook-accessory.freehost.se/toshiba-notebook.html[/url]
[url=http://notebook-accessory.freehost.se/used-notebook-laptop-computer.html]used notebook laptop computer[/url]
[url=http://notebook-accessory.freehost.se/refurbished-notebook-computer.html]refurbished notebook computer[/url]
[url=http://notebook-accessory.freehost.se/low-cost-notebook-computer.html]low cost notebook computer[/url]
[url=http://notebook-accessory.freehost.se/logitech-quickcam-for-notebook.html]logitech quickcam for notebook[/url]
[url=http://notebook-accessory.freehost.se/notebook-sale.html]notebook sale[/url]
Please if you answer, say what laptop you have and is warm? or boil :)
Thanks

Revision as of 00:17, 1 September 2006

Wow, I followed this and it doesn't work, either method......

Now what? nobody to turn to, no more help available. Is it an ATI problem or a Dapper one?

I would have never believed that as "advanced" as this O/S is that it is this difficult to get a display driver to work.

This is absolutely incredible....

the problem is the driver, not the operating system.. ATI should take a lesson from nVidia.

[UBfusion reporting]: Many ATI chipsets suffer from this, due to faulty libGl.so.1.2 in the new ATI drivers - use the old file from old drivers, read http://ubuntuforums.org/showthread.php?t=185033

try using ONLY 128MB of UMA memory instead of Sideport+UMA

This is a really strange problem with the HP/Compaq R4000/zv6000:

Once upon a time, ATI driver fglrx_6_8_0-8.13.4-1.i386.rpm provided full DRI and 3D support on Ubuntu 5.04 kernel 2.6.10. ( wget http://www2.ati.com/drivers/linux/fglrx_6_8_0-8.13.4-1.i386.rpm )

Then, ATI's new releases only worked if we used 128MB of shared/system/UMA memory along with the 128MB of onboard video memory many of these laptop models have.

Now, after installing Ubuntu 6.0.6 kernel 2.6.15, the ATI driver will only work with full DRI and 3D support if I totally disable the 128MB of onboard video memory and use ONLY shared/system/UMA memory( 128MB )....

Now, with my fully functioning Ubuntu 5.0.4 installation, when I go from only Sideport to only UMA, the glxgears output goes from ~1200fps to ~500fps

With the new kernel and Xorg server of Ubuntu 6.0.6 running only UMA video memory and the 5.0.4 version of glxgears, output from that program is ~800fps. Still a 30% decrease in performance from using the 128MB of onboard/Sideport video memory.

IMO, running like this is not a fix but a crippled hack and it would be really nice if HP/Compaq or ATI would tell us what the problem is, why it exists, how it is to be fixed. So try just 128M of UMA in your BIOS and see if that enables you to get DRI/Direct Rendering working with the ATI/fglrx driver.

OK - I noticed that the wiki had been updated to reflect the 8.26.18 release but the line relating to the Xpress 200M card not functioning with the 8.25.18 drivers was unchanged. Can someone confirm if the 8.26.18 drivers work with the 200M card or not?

  • I just tried it with the 8.28.8 drivers and while it does run with Sideport and UMA on it doesn't run well, including drawing errors and freezes shortly after logging in.

almost work in Compaq nx7010

Hi,

I tryied everything I found with this $#%&"@ ati video card and, after 3 days of little sleeping and several distros & reinstallations, the closest to a working configuration I got was with Ubuntu dapper and method 1 in your guide (including HP zt3000 / Compaq nx7000 troubleshooting). Logically it seems to work (fglrxinfo reports OpenGL vendor string: ATI Technologies Inc., etc.) but phisically it doesn't (see the picture at [1]). Image is barely usable (loggin in that way I was able to run fglrxinfo), it covers 60% of the screen horizontally and flickers a lot.

Any ideas how to fix it?

File:Http://www.tirata.com/nx7010/nx7010.jpg


Mhhh could you post please your xorg.conf file in order to double check it? You could add the following too: max resolution (seems to be 1280 x 800 TFT), GPU Model (seems to be an ATI Radeon Mobility 9200, issue a lspci -v to know exactly the chipset type). With that info in hand __perhaps__ something can be done, some log files would be appreciated too.

As you describe it could be a problem with the Modelines configuration in xorg driving the TFT display out of sync. Try a lower resolution (say 1024x768, 800x600, 640x480); if it doesn't work try defining a manual modeline for the resolution you are trying. Good luck and keep posting! :-)

nx7000 problem

I have a strange problem with the ModeLine. It works when i use the ModeLine for the nx7010, but only the default resolution of 1680x1050. When i choose a lower resolution for example 1024x768 the screen is not useable. Can somebody help me? I have testet some ModeLine generaters, but nothing works.