Revision as of 11:02, 10 September 2007 by (talk)

beach naked www herbier breakin out buddah www preistoria it yamarin xxx reggaeton bred pitt troy www gay tvchat zuma online bellissimo mestiere beani man dude x change 2 www humourhumour com www enit it blame it on the boogie brack point bosetti barzellette pensioni adulterio all'italiana bonie tyler kareen antonn www rc it wise guys yorgos mazonakis barbara butt www murvo it angelica, ragazza jet zeze de camargo e luciano bwfighters com bob fosse www santa bernadette com briana banks foto www ohiolottery com balla umberto balsamo www explorador de internet com beans and beef zombie the cramberries blac eye pass www costamagica it baby sitter cercasi www robotica yamaha audio driver sv550 blue a chi ti dice backstage manuela arcuri gratis bello brutto e cattivo www ironico com www smack down a sud niente di nuovo x don give it to ya benzodiazepine www vipline it you tutch my tralala bernardi quinto stampi zdub si zdob y todo quedo en nada britney overprotected www unipv it banorte com you touch my talla wp www wp pl boom economico degli anni 60 beeanie man baigio antonacci www mzos hr www provinciabrescia it xmule linux www fanal fantasy com yagir boney james yohoo japan bandiera portoghese xvidcore dll www blue org www alezah com basi musicali con cori gratis www musicascarica com bajor anestesia letale www primaposizione betulla www sigeitalia org yllka black time yamaha 650 dragstar www ryair com bucatini alla molisana www pizzolon com arriva durango... paga o muori www articolo31 com www aironef banda calypso ao vivo zanzara young girls www lopeor com zu atrapartu arte www vernici auto it brazilian affair bruup yugioh www trucoteca warcraft com www laposte net biglietti di auguri matrimonio benny more www avvenire it beautiful aguilera xerostomia x man yaspa black peace bacio saffico carolina amore e ginnastica baywatch girls brother bear xelibri x 8 berthe morisot breas zoo 015 x change peach princess www giochi per anziani it zsnesw basi midi festivalbar 2004 zeze di camargo e luciano yasar ipek yesica toscanini zanichelli ya omry www priscila y sus balas de plata bilboa gollini buoni o cattivi mp3 zarqawi www lane com zennas alterazione genetica biglietti di atalanta bologna www ghironda com www ebay de www rive com ballata notturna ying yang twinz www studiovercelli it zecchino d oro 1998 bring to life amiche in attesa www pubblicherelazioni com ballo del pinguino b u r zecchino d oro cocco e drilli armi contro la legge www regioneabruzzo it busco novia ==Kernel Related Issues==

No 3D acceleration

If you see output that looks like this:

$ fglrxinfo 
display: :0.0 screen: 0 
OpenGL vendor string: Mesa project: 
OpenGL renderer string: Mesa GLX Indirect 
OpenGL version string: 1.2 (1.5 Mesa 6.4.1) 

Then try these two commands:

sudo mkdir -p /usr/X11R6/lib/modules/dri 
sudo ln -s /usr/lib/dri/ /usr/X11R6/lib/modules/dri 


Or you can try deleting all files from the /lib/modules/$(uname -r)/volatile folder and relinking:

sudo rm /lib/modules/$(uname -r)/volatile/*
sudo ln -s /lib/modules/$(uname -r)/misc/fglrx.ko /lib/modules/$(uname -r)/volatile/fglrx.ko

If that doesn't work confirm fglrx is loaded:

lsmod | grep fglrx

If it returns nothing then try this:

sudo depmod -ae
sudo echo fglrx >> /etc/modules

(If this returns "bash: /etc/modules: Permission denied" then sudo su first.)

If it doesn't still work, open up /etc/modprobe.d/lrm-video with an editor, and uncomment any line(s) that contains fglrx in it.

In case nothing above works, open /etc/modprobe.d/blacklist-restricted with an editor and comment any line that might contain fglrx word in it.

nForce 3 AGP Issues

For nForce3 based motherboards: if the install seems to go well, but fglrx still fails and $ fglrxinfo tells you you're still running Mesa, there may be a problem with the nVidia AGP-PCI Bridge module's compatibility with your BIOS (or vice versa, I haven't yet investigated). (Confirmed at least for ASUS K8N-E Deluxe.) A solution is to downgrade your BIOS to a previous version (see your motherboard manual/manufacturer's website for instructions). Here is a list of compatible BIOS versions (if your model is not listed here and you find a version that fixes the problem, please add it to the list so others can benefit):

(Update: March 22nd, 2007) It appears that the beta ASUS bios 1012 will also fix the problem. I had the ATI drivers installed but fglrxinfo was still reporting Mesa as the OpenGL provider. I flashed the BIOS to 1012, rebooted into Ubuntu. Problem solved.

  • ASUS
    • K8N-E Deluxe: Version 1006
    • K8N-E Deluxe: Version 1012 beta
    • K8N Bios versions up 1003 to 1011, my Solution -> K8V-X (Asus with Via-Chipset) It is working really good now. (Always Problems: nForce3 Chipset)
    • K8Upgrade-NF3

(A little workaround for K8Upgrade-NF3 is to edit xorg.conf, in section "Devices", adding this line: Option "UseInternalAGPGART" "no")

AGP Initialization fails with amd_k7_agp module

With Kernel 2.6.16.x, there came a new feature called "EDAC" which creates a conflict causing amd_k7_agp not to work. This results in a

(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP

Message in the error-log.

To resolve the problem, in your kernel config change



#CONFIG_EDAC_AMD76X is not set

(just comment it out) recompile/reinstall/reboot your kernel. Everything should work now.

X Server Related Issues

No XVideo support on 690G integrated graphic chipset

  • Upgrade your BIOS if you get random flicker lines and black screen with a 690G chip.
  • Motherboard using the 690G IGP chipset don't have XVideo support. When you execute the "xvinfo" command you get "no adaptors present". This is the case by using the 8.39.4 FGLRX driver and whenever the "sudo aticonfig --overlay-type=Xv" command or the "sudo aticonfig --overlay-type=opengl" was used. ATI seem to know this as there list TVtime as an application unable to run on a 690G chip.

System lockup on logout or switch to virtual consoles

If your system locks up after you logout or when you try to switch to a virtual console, this might be an instance of this bug. It is likely that the problem only occurs for users with an Xorg version of at least 7.0. Probably it only affects users of DVI.

There is a workaround: Use a standard D-Sub VGA connector instead of the DVI connector.

This workaround was posted as a comment to another related bug: see here.

BigDesktop doesn't work after GDM login screen

This can occur on Ubuntu Feisty Fawn sometimes.

System > Prefrences > Screen Resolution

Select the resolution that is a combination of both screen resolutions wide and your height.

Computer Freezes while using fglrx (UMA and SIDEPORT)

If after choosing fglrx as your driver in either xorg.conf or xfree86.conf files, the computer freezes and becomes unresponsive while trying to start X this may be the solution.

Some ATI cards have the ability to run in three modes: UMA, SIDEPORT, or a combination of both. UMA mode is that one in which the video card does not use its dedicated memory, but rather uses and shares the system memory. On the other hand, SIDEPORT mode is the one in which the card uses its own dedicated memory. And finally, the third mode is a combination of the previous modes in which the card uses both the system memory and its dedicated memory.

If your computer hangs, this settings may be where the solution lies. If your computer hangs, try using either UMA by itself or a combination of both. However, if you choose the combination, make sure that the UMA one is at least 128MB. In my case, I have SIDEPORT 128MB and 128MB UMA. If I choose any less for UMA, it does not work. This is definetly not an attractive solution since it compromises your systems performance. Hopefully, this will be solved very soon.

On some systems, the BIOS screen may not offer a choice of UMA or SIDEPORT. In this case, you can try turning the amount of RAM dedicated to the video card down, from 128Mb to 64Mb for example.

Graphical Anomalies

This was experienced with an ATI Radeon X1600 Pro 512mb:

After following instructions for both Method 1 and Method 2, whenever the Composite Extension is disabled, the display would be almost unusable, but the fglrxinfo command would display the correct information. If the Composite Extension is re-enabled the display would be usable, but fglrxinfo would report using mesa drivers.

To resolve the problem it maybe needed to lower the AGP Aperture setting in my BIOS to 128mb (or lower worked too). The AGP Aperture was initially set to 256mb. After setting the AGP Aperture to 128mb, everything worked perfectly; the Composite Extension is disabled, fglrxinfo reports the correct drivers, and direct rendering is enabled. Some systems may require setting the AGP Aperture to the highest setting (256mb or 512mb).

Blank Screen with Xorg 1.3.0

If you happen to get a blank screen on X startup and you find lines similar to those in your Xorg.log:

File: /var/log/Xorg.log
2: /usr/lib64/xorg/modules/drivers// 0x549) [...]
3: /usr/lib64/xorg/modules/drivers// [...]
4: /usr/lib64/xorg/modules/drivers// 0x8b3) [...]

Then you're probably using the ati-drivers with Xorg-1.3.0. If that's the case the only solution (known to me) is to use a version < 1.3.0.

X800/X850 fan is very loud / constantly works

It seems fglrx has a bug with all X800/X850 cards causing them to heat up excessively even when not in 3D mode. This behaviour will cause the cards' fans to function on full blast continuously. There is no known fix as of driver 8.31.05 or previous. Open source "radeon" driver does not exhibit this problem.

System freezes after logout with GDM or KDM[2]

If you use GDM, which is the default Login Manager on Ubuntu, modify

sudo gedit /etc/gdm/gdm.conf
File: /etc/gdm/gdm.conf

If you use KDM, which is the default Login Manager on Kubuntu, add to the [X-:*-Core] section the following

sudo kate /etc/kde3/kdm/kdmrc
File: /etc/kde3/kdm/kdmrc


Distribution Neutral Steps

Verifying | Configuring | Troubleshooting