Ubuntu: Difference between revisions

From cchtml.com
m (Reverted edits by 213.163.227.122 (talk) to last revision by Mooninite)
Line 47: Line 47:
At this stage, do not panic! This does not necessarily imply a problem with the module, indeed your card may be not officially supported. Numerous reports on forums show that users end up using the drivers successfully anyway, e.g. for an HD 6850 card (BARTS codename). To force Xorg to load the driver for fglrx anyway, just manually create a minimal xorg.conf file, as suggested on this wiki (follow the tutorials). The module should then load and everything else should (hopefully) work. (On my system even the Catalyst Control Center was working at that point.) Except you have the "Unsupported hardware" mark on a corner of the screen, but that is another problem... (Forum users report they have been able to get rid of this as well, although caution should be used as the hack scripts seem not to work with version 11.1 of the Catalyst drivers.)
At this stage, do not panic! This does not necessarily imply a problem with the module, indeed your card may be not officially supported. Numerous reports on forums show that users end up using the drivers successfully anyway, e.g. for an HD 6850 card (BARTS codename). To force Xorg to load the driver for fglrx anyway, just manually create a minimal xorg.conf file, as suggested on this wiki (follow the tutorials). The module should then load and everything else should (hopefully) work. (On my system even the Catalyst Control Center was working at that point.) Except you have the "Unsupported hardware" mark on a corner of the screen, but that is another problem... (Forum users report they have been able to get rid of this as well, although caution should be used as the hack scripts seem not to work with version 11.1 of the Catalyst drivers.)


启动不了。。。Failed to open file  /usr/share/pixmaps/splash/ubuntu-splash.png': No such file or directory/usr/share/ubuntu-tweak/Nautilus.py:49: GtkWarning: GtkSpinButton: snttieg an adjustment with non-zero page size is deprecated  spinbutton = gtk.SpinButton(gtk.Adjustment(client.get_int( /apps/nautilus/icon_view/thumbnail_size ), 16, 512, 16, 16, 16))Traceback (most recent call last):  File  ./ubuntu-tweak.py , line 44, in    MainWindow().main()  File  /usr/share/ubuntu-tweak/MainWindow.py , line 228, in __init__    self.notebook = self.create_notebook()  File  /usr/share/ubuntu-tweak/MainWindow.py , line 325, in create_notebook    notebook.append_page(page(self), None)  File  /usr/share/ubuntu-tweak/PowerManager.py , line 52, in __init__    [gtk.Label(_("The Performance value when on AC power")), Factory.create("gconfscale", 0, 100, "performance_ac", 0)],  File  /usr/share/ubuntu-tweak/Factory.py , line 60, in create    return getattr(Factory(),  create_%s  % widget)(argv[0], argv[1], argv[2], argv[3])  File  /usr/share/ubuntu-tweak/Factory.py , line 107, in create_gconfscale    scale = GconfScale(min, max, self.keys[key], digits)  File  /usr/share/ubuntu-tweak/Widgets.py , line 128, in __init__    if self.value.type == gconf.VALUE_INT:AttributeError:  NoneType' object has no attribute  type'
== Related Resources ==
* Ubuntuforums.org Video forum: [http://ubuntuforums.org/forumdisplay.php?f=138 Dapper]
 
 
{{VCT}}
 
 
 
 
[[Category:Distributions]]

Revision as of 21:15, 29 January 2013

Tips and Tricks

  • To build your own .deb packages for Ubuntu you will need to install at least the following packages from the apt repositories:
    • build-essential
    • fakeroot
    • dh-make
    • debconf
    • execstack
    • dh-modaliases
  • Moreover for latest releases, the following package simplifies module installation:
    • dkms
  • If you want to use a newer version of the driver than the one which comes with your distribution and you have linux-restricted-modules installed, you have to disable the fglrx kernel module from linux-restricted-modules because it will invariably get in the way of your more recent drivers. Detailed information on how to achieve this can be found in the distribution-specific guides.
  • You can configure the driver with the aticonfig tool, more information can be found at Configuring.

Old Version gets installed during update

When updating a manual install - that is removing the old install and installing the new version - the old version might get installed again. This was observed starting with 8.10. If this happens it might help to remove the old version then delete the debian package files of the old version and run "sudo apt-get clean" before installing the new version. See the Ubuntu version dependent install documentation for instructions how to perform these steps. As soon as a new Catalyst version (current is 12.10 - as of Nov. 09, 2012) is available, these instructions might get updated.

Installation

Unsupported adapter

Specific notes for Radeon HD 6xxx cards with no official support yet (see Hardware#Not_Yet_Supported_or_Unoffically_Supported).

After installing the fglrx module, you might get the following message when trying to configure X through aticonfig:

 aticonfig: No supported adapters detected

Also you might see that the fglrx module has not been used by Xorg (no line saying ‘‘LoadModule: "fglrx"’’ in /var/log/Xorg.0.log). Also on my system I had segmentation faults from the ati Catalyst Control Center (amdcccle).

At this stage, do not panic! This does not necessarily imply a problem with the module, indeed your card may be not officially supported. Numerous reports on forums show that users end up using the drivers successfully anyway, e.g. for an HD 6850 card (BARTS codename). To force Xorg to load the driver for fglrx anyway, just manually create a minimal xorg.conf file, as suggested on this wiki (follow the tutorials). The module should then load and everything else should (hopefully) work. (On my system even the Catalyst Control Center was working at that point.) Except you have the "Unsupported hardware" mark on a corner of the screen, but that is another problem... (Forum users report they have been able to get rid of this as well, although caution should be used as the hack scripts seem not to work with version 11.1 of the Catalyst drivers.)

Related Resources

  • Ubuntuforums.org Video forum: Dapper



Distribution Neutral Steps

Verifying | Configuring | Troubleshooting