Ubuntu Gutsy Installation Guide

From cchtml.com
Revision as of 20:41, 27 February 2008 by 78.150.250.20 (talk) (Spelling error changed.)

Pre-Installation Checks

Enable "restricted" Repository

Make sure the restricted repository is enabled in /etc/apt/sources.list or this guide will not work!

System > Administration > Software Sources. Check "Proprietary Drivers for Devices (Restricted)" box.

Installation

For most users it won't be necessary to go into installation and configuration details of the driver. Ubuntu 7.10 (Gutsy) provides a notification saying that there are restricted drivers available. You just have to go there (Restricted Drivers Manager) and enable the "ATI accelerated graphics driver". Ubuntu will then install and configure the driver for you. If this does not provide the optimal solution you were looking for, please read ahead.

Method 1: Install the Driver the Ubuntu Way

This will install the driver that is currently in the repositories. It may be older than the current version from AMD.

sudo apt-get update	
sudo apt-get install linux-restricted-modules-generic restricted-manager
sudo apt-get install xorg-driver-fglrx
sudo depmod -a

The second line of the above may not be necessary. If apt says it cannot find the "linux-restricted-modules" package, try line 3. If that fails, check your sources.list (see top of page)

If the system complains about dependencies, use your preferred package manager to download python2.4 and, if necessary, its dependencies.

Method 2: Install the Catalyst 8.2 Driver Manually

This is just an alternative installation method for the section above. It might help if you still get 'DRI missing' errors.
  • Note: The newest 8.455.2 does not enable DRI using gutsy. It needs a more recent X.org for this, but 2D does work. "(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0"
  • Note: If you are running the -rt kernel, you will fail to compile the kernel module with "FATAL: modpost: GPL-incompatible module fglrx.ko uses GPL-only symbol '__rcu_read_lock'". (Follow these instructions for a workaround: http://64studio.com/node/150#comment-1148)

Download the ATI driver installer: ati-driver-installer-8-02-x86.x86_64.run (this installer is for 32bit and 64bit systems)

Change to the download directory. Make sure that you have the universe and multiverse repositories enabled in /etc/apt/sources.list before doing these steps.

There is a detailed manual with screenshots at Ubuntu Wiki.

By default, Ubuntu did not enable the Universe and Multiverse repositories, but now in Gutsy, both Universe and Multiverse are activated by default.

Install necessary tools:

sudo apt-get update
sudo apt-get install build-essential fakeroot dh-make debhelper debconf libstdc++5 dkms

Uninstall previous fglrx: Using Synaptic, completely remove any packages containing "fglrx" in their name.

Create .deb packages:

sudo sh ati-driver-installer-8-02-x86.x86_64.run --buildpkg Ubuntu/gutsy

note: if this step fails with a signal being caught, and you are running the script on an NFS-mounted directory, copy it to a local partition, and it will work. The same error may result from insufficient disk space.

If this step fails on amd64/x86_64 with a No such file or directory message about missing files in X11R6/lib, follow these instructions and come back here. Also check that your downloadpath does not contain spaces.

Blacklist old fglrx module from linux-restricted-modules:

As Ubuntu Gutsy's linux-restricted-modules package includes the fglrx module from an old driver version (8.37.6), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

Ubuntu/Gnome users type in:

gksu gedit /etc/default/linux-restricted-modules-common

Kubuntu/KDE users type in:

kdesu kate /etc/default/linux-restricted-modules-common

Add "fglrx" to the line "DISABLED_MODULES"

File: /etc/default/linux-restricted-modules-common
DISABLED_MODULES="fglrx"

Please note that after the modification above, the "Restricted Driver Manager" will signal "ATI accelerated graphics driver" not enabled (unticked). This is perfectly correct. At the end of the installation procedure it will signal in Status: "in use" (green light), but NOT enabled. It simply means that the fglrx module contained in the linux-restricted-modules package is not enabled, but another fglrx module (7.12) is in use.

You may also need to edit the file (if it exists):

gksu gedit /etc/modprobe.d/blacklist-restricted

Put a # in front of the line "blacklist fglrx", if it is present. Otherwise, the kernel module will not load automatically, and you will not get 3D acceleration.

Remove any old fglrx debs from /usr/src/:

sudo rm /usr/src/fglrx-kernel*.deb

Install .deb packages:

sudo dpkg -i xorg-driver-fglrx_8.455.2-0*.deb fglrx-kernel-source_8.455.2-0*.deb fglrx-amdcccle_8.455.2-0*.deb
  • Note: If you get a 'Bad file descriptor' message concerning the xorg.conf file try switching user to root and repeating the same command without sudo. This might be valid for the following commands too. (Ubuntu Gutsy installs with no password set for root by default. You can set a password for the root by typing 'sudo passwd root' first.)
  • Note: If you have a 64 bit install, the above dpkg command will likely complain that "Errors were encountered while processing: fglrx-amdcccle". This is because of a dependency of the amdccle package on 32 bit libraries. If you receive this error, issue the following command after the above dpkg command, which will force the installation of all of the 32 bit dependencies, and then the amdccle package:
sudo apt-get install -f

Nevertheless the previous command is always recommended.

  • Note: I attempted the above and received the following error message:
Error! Your kernel source for kernel 2.6.22-14-386 cannot be found at
/lib/modules/2.6.22-14-386/build or /lib/modules/2.6.22-14-386/source.

Google eventually lead me to 1) the ATI release notes and 2) the Feisty installation guide here Ubuntu_Feisty_Installation_Guide, both of which lead me to suspect that I need to install kernel sources or kernel headers.

However, I already have the linux-headers-generic package installed. Somebody on #ubuntu recommended that I install the specific headers package for my kernel:

$ uname -r
$ sudo aptitude install linux-headers-2.6.22-14-386

This seemed to fix it, the aptitude command installed the headers and then proceeded to complete the installation of fglrx-kernel-source_8.452.1-1*.deb.

Configure the Driver

  • Note Method 2 Users: Before you carry out this step you must reboot your machine. Or else the fglrx driver will not be in use on xorg.conf and using the aticonfig options will cause a memory dump and not intialise the Driver properly.
  • Note: An alternative to the aticonfig --initial command is to edit /etc/X11/xorg.conf and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc. Another alternative is aticonfig --initial --force brute if you encounter issues with the first command.
sudo aticonfig --initial

Then:

sudo aticonfig --overlay-type=Xv
  • Note: Alternative in the overlay-type to "Xv" can be "opengl" or "disable" if the TV-out makes problems in videos.

Alternative: Configure the Driver, The Manual Way:

An alternative to the "sudo aticonfig" commands is to edit "/etc/X11/xorg.conf" and change the "Device" section for the video card as shown below. This way you won't lose your old settings.

gksu gedit /etc/X11/xorg.conf
Section "Device"
	[...]
#       Driver          "vesa"
	Driver		"fglrx"
	Option		"VideoOverlay"		"on"
	Option		"OpenGLOverlay"		"off"
	[...]
EndSection


TV - Out

The composite TV-Out is not working simultaneously with the VGA on my System. To use it I have turned the VGA off and only the TV on. Attention! This command turns off your Monitor!!

sudo aticonfig --enable-monitor=tv

To change back to VGA:

sudo aticonfig --enable-monitor=crt1

Some have had luck with both mirrored.

sudo aticonfig --force-monitor=crt1
sudo aticonfig --enable-monitor=crt1,tv

reboot after that and it should mirror the CRT1 onto the TV.

Finish the Installation

Now save any open document and reboot your system:

sudo shutdown -hr now
  • Note: An alternative to rebooting is to restart the X Server by pressing your CTRL ALT BACKSPACE keys. You must remove any old kernel modules such as "drm" "radeon" or "fglrx" using the "rmmod" command. Example: sudo rmmod fglrx
  • Note: Another way to reboot:
sudo reboot


Post-Installation Checks and Tweaks

Verifying

Run the following command to check its output to ensure the fglrx driver is installed properly:

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon Xpress Series
OpenGL version string: 2.1.7281 Release

The OpenGL vendor string should read ATI and not Mesa.

If it still says Mesa and not ATI, even after re-enabling the driver from the Restricted-manager: You can try the following:

  • $ less /var/log/Xorg.0.log |grep EE
    if this command returns (EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work then remove the kernel module and reinstall it.
$ sudo dkms remove -m fglrx -v 8.452.1 --all
  • Remove all the packages provided by the xserver-xorg-video-all meta-package (search for it using Synaptic or Adept), then restart the machine. The X Server should now use the new fglrx driver by force (provided the driver is being used in xorg.conf).
If you can't log in after this, you'll have to log in to a terminal in the login screen, and reinstall the xserver-xorg-video-all package. Your problem is probably somewhere else. (taken from [1]).

If it says libGL.so.1: cannot open shared object file: No such file or directory... Check if you have a /usr/lib/libGL.so.1.2, if so do this:

 $ ls -l /usr/lib/libGL*
  • The file permission should be "-rw-rw-r--". If the permission reads "-rw-rw----", do command
 $ sudo chmod o+r /usr/lib/libGL.so.1.2
  • If the permission is correct, fixed with command:
$ sudo ln -s /usr/lib/libGL.so.1.2 /usr/lib/libGL.so.1

Note: Here is the glxinfo of a good install (for those interested).

Enable laptop mode on battery power

Enabling laptop mode on battery power gives you much better battery life, however be aware that sometimes it causes odd hangs.

Switch ENABLE_LAPTOP_MODE to true

File: /etc/default/acpi-support
# Switch to laptop-mode on battery power - off by default as it causes odd
# hangs on some machines
ENABLE_LAPTOP_MODE=true

Switch FGLRX_ACPI_SWITCH_POWERSTATES to true

File: /etc/default/fglrx
# Uncomment the next line to enable powerstate switching on ACPI
# events for lid open/close and AC adapter on/off
FGLRX_ACPI_SWITCH_POWERSTATES=true

Additional configure with aticonfig tool

You can configure the driver even further with the aticonfig tool, more information can be found at Configuring.

For example:

  • use powerplay option to switch power state for battery friendly or performance mode
  • use dual head or one big desktop mode
  • turn second monitor on/off on the fly


Specific Issues

3D desktop effects

The new ATI drivers use AIGLX so there is not need to install XGL that older drivers (< 8.40) required.

Remove this section from to the /etc/X11/xorg.conf file. The new xorg server enables "Composite" by default.

# Section "Extensions"
#        Option  "Composite" "0"
# EndSection

Compiz does not know about the fglrx driver. You can either skip the checks

mkdir -p ~/.config/compiz && echo SKIP_CHECKS=yes >> ~/.config/compiz/compiz-manager

or add it to the compiz white list, and clear the blacklist pci Ids variable *Recommended*

sudo gedit /usr/bin/compiz
# Driver whitelist
WHITELIST="fglrx nvidia intel ati radeon i810"
# blacklist based on the pci ids 
# BLACKLIST_PCIIDS="$T"
BLACKLIST_PCIIDS=""


You might have to modify the path for line 30 and 31

   COMPIZ_BIN_PATH="/usr/bin/" # For window decorators and compiz
   PLUGIN_PATH="/usr/lib/compiz/"

The COMPIZ_NAME on line 35 should also be modified accordingly

   COMPIZ_NAME="compiz.real" # Final name for compiz (compiz.real) 

After the necessary configurations, just restart X and enjoy the cool effects.

If it still does not work, locate /etc/xdg/compiz/compiz-manager.ubuntu and see if it contains an infinite loop in it. If it does, comment out the line that causes the infinite loop.

# . /etc/xdg/compiz/compiz-manager.ubuntu

For Kubuntu you need some extra steps:

sudo apt-get install compiz compiz-kde compizconfig-settings-manager compiz-core compiz-fusion-plugins-main compiz-plugins

To test 3D Effects, press ALT+F2 and type "compiz --replace".

To configure use the tool KMenu->Settings->Avanced Desktop Effect Settings.

Suspend/Hibernation work with 7.12

With Gutsy release, there was a big problem using the ATI proprietary drivers. The Suspend/Hibernate function stopped working. The problem was due to the new SLUB allocator incorporated in 2.6.22 / 2.6.23 Kernel.

The problem has been solved in the AMD Catalyst 7.12 driver release. Suspend/hibernate is not working for FireGL 5250. For FireGL 5200, suspend works with the 7.12 fglrx kernel module loaded (which did not work before this release) , but does not work if X is running.

For Thinkpad T60 with ATI X1400, to get the laptop to wake up from suspend, I had to change the following in /etc/default/acpi-support:

SAVE_VBE_STATE=false

POST_VIDEO=false

Found here: https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/121653/

If you get /usr/X11R6/lib/modules/dri/fglrx_dri.so not found

sudo ln -s /usr/lib/ /usr/X11R6/lib/modules

Segmentation Fault with glxinfo/fglrxinfo

If fglrxinfo or glxinfo returns a Segmentation fault like this:

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon Xpress Series
OpenGL version string: 1.4 (2.1.7170 Release)

Segmentation fault

Set output of libGL to verbose with

$ export LIBGL_DEBUG=verbose

Run fglrxinfo or glxinfo again

libGL: XF86DRIGetClientDriverName: 8.44.3 fglrx (screen 0)
libGL: OpenDriver: trying /usr/lib/dri/fglrx_dri.so
libGL error: dlopen /usr/lib/dri/fglrx_dri.so failed (/usr/lib/dri/fglrx_dri.so: cannot open shared object file: Permission denied)
libGL error: unable to load driver: fglrx_dri.so
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon Xpress Series
OpenGL version string: 1.4 (2.1.7170 Release)

Segmentation fault

Don't know if its always fglrx_dri.so, but the fix is to add read permissions to the file.

Check if read permission is not there

ls -l /usr/lib/dri/ |grep fglrx_dri
-rw-rw---- 1 root root 17462688 2008-01-13 17:42 fglrx_dri.so

Add read permission

$ sudo chmod +r /usr/lib/dri/fglrx_dri.so

Check read permission

ls -l /usr/lib/dri/ |grep fglrx_dri
-rw-rw-r-- 1 root root 17462688 2008-01-13 17:42 fglrx_dri.so

libGL error

  • fglrxinfo gives: libGL.so.1: cannot open shared object file.
  • Check the permission of the libGL.so.1.2 file with command:
 ls -l /usr/lib/libGL*
  • The file permission of libGL.so.1.2 should be "-rw-rw-r--". If the permission reads "-rw-rw----", do command
 sudo chmod o+r /usr/lib/libGL.so.1.2
  • If the permission is correct, fixed with command:
sudo ln -s /usr/lib/libGL.so.1.2 /usr/lib/libGL.so.1


Monitor detection (1680x1050 Resolution Issue)--- SOLVED

As specified in the release notes, "Connecting a display device that supports 1680x1050 to a system running Linux may result in a maximum display resolution of 1280x1024 only being available". (from thread)

[It works with the latest driver]

Fglrx driver does not detect some monitors correctly, so you have to do it manually (google about your monitor spec with keyword: xorg.conf).

For example: Samsung 205BW 1680x1050 monitor needs manually set:

File: /etc/X11/xorg.conf
Section "Monitor"
       Option "DPMS"
       Identifier "samsung-monitor"
       VendorName "Samsung"
       ModelName "SyncMaster 205BW"
       HorizSync 31.4 - 80.0
       VertRefresh 56.000 - 75.000
       Modeline "1680x1050" 146.25 1680 1784 1960 2240 1050 1053 1059 1089
EndSection

Section "Screen"
	Identifier	"samsung-screen"
	Device		"samsung-device"
	Monitor		"samsung-monitor"
	Defaultdepth	24
	SubSection "Display"
		Depth	24
		Modes		"1680x1050"
	EndSubSection
EndSection


A possible problem with fglrx.ko conflicts

NOTE: I've run into strange problem building fglrx-kernel-source_8.443.1-1_i386.deb. If pentium-builder is installed, dkms fails to build fglrx.ko for make error (mixed implicit and static pattern rules. Stop.). It is caused by gcc.real and other indirections and wrong gcc version detection. Removing pentium-builder cures the problem.

It's necessary, because sometimes this file is written by other packages, and so there's no 3D acceleration. Check that the file /lib/modules/$(uname -r)/misc/fglrx.ko has been created.

Create the following folder

sudo mkdir /lib/modules/$(uname -r)/volatile

Note: the volatile directory might already exist at this stage then simply continue with the next step.

Create a symbolic link

sudo ln -sf /lib/modules/$(uname -r)/misc/fglrx.ko /lib/modules/$(uname -r)/volatile/fglrx.ko


NOTE : On my Gutsy install, after a reboot this link was always removed automatically leaving me without an fglrx module loaded, and thus no ATI rendering. There have been several ways of getting around this suggested here, and here is the one that worked for me:

sudo gedit /etc/init.d/ati-module-fix

And put this in it:

#!/bin/sh -e

# For loading ATI display drivers

ln -sf /lib/modules/$(uname -r)/misc/fglrx.ko /lib/modules/$(uname -r)/volatile/fglrx.ko
exit 0

Make it executable

sudo chmod ugo+x /etc/init.d/ati-module-fix

Now, make this run before gdm

To check the gdm sequence number,

ls /etc/rc2.d/

The value for [seqno] in the section below should be the gdm sequence number -1.

sudo update-rc.d ati-module-fix defaults [seqno]

Revert to Xorg driver

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing

sudo dpkg-reconfigure xserver-xorg

and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

sudo apt-get install --reinstall libgl1-mesa-glx

See Also