Ubuntu Installation Guide: Difference between revisions

From cchtml.com
Line 74: Line 74:
sudo apt-get install fakeroot dh-make debconf libstdc++5 gcc-3.3-base
sudo apt-get install fakeroot dh-make debconf libstdc++5 gcc-3.3-base
sudo sh ./ati-driver-installer-8.19.10-i386.run --buildpkg Ubuntu/breezy
sudo sh ./ati-driver-installer-8.19.10-i386.run --buildpkg Ubuntu/breezy
sudo dpkg -i xorg-driver-fglrx_8.19.10-1_i386.deb
sudo dpkg -i /tmp/xorg-driver-fglrx_8.19.10-1_i386.deb
sudo dpkg -i fglrx-control_8.19.10-1_i386.deb
sudo dpkg -i /tmp/fglrx-control_8.19.10-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.19.10-1_i386.deb
sudo dpkg -i /tmp/fglrx-kernel-source_8.19.10-1_i386.deb
</pre>
</pre>



Revision as of 18:03, 8 December 2005

Method 1: Installing Breezy's Included Driver (8.16.20)

The fglrx driver supports Radeon 8500+ and the X-series cards (see release notes). When running the dpkg-reconfigure commands you can accept the defaults whenever you aren't sure.

Installing the driver

All Platforms:

sudo apt-get install xorg-driver-fglrx
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo dpkg-reconfigure xserver-xorg #Select the fglrx driver and 64-bit users should deselect int10a

64-bit users:

You have to downgrade to an older version of libdri.a due to an incompatilbity with the ATI drivers. Download it here

Change to download directory:

gunzip libdri.a.gz
sudo cp /usr/X11R6/lib/modules/extensions/libdri.a libdri.a.old
sudo cp libdri.a /usr/X11R6/lib/modules/extensions/

If you wish to revert to any non-fglrx driver you will need to copy the libdri.a.old file back over the fglrx version.

All platforms: Ctrl-Alt-Backspace to restart your desktop.


Confirm that it works

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 1.3.5272 (X4.3.0-8.16.20)

Troubleshooting

If you have a widescreen LCD display that is stuck at 1024x768 then it is probably the bug in the 8.16.20 driver that was fixed in 8.18.X (see the next section).

The output of dmesg | grep fglrx and /var/log/Xorg.0.log are most useful when looking for errors.

Method 2: Generating/Installing Ubuntu packages for the newer 8.19.x drivers

Important Warning: Installation of this driver requires removing the restricted-modules package in order to work. That package includes drivers for madwifi (Atheros wireless cards), nvidia cards, and a handful of other devices. I provide a work-around for the madwifi drivers, but you need to perform it before removing the restricted modules (jump to end of this this post).

When running the dpkg-reconfigure command you should answer the questions that you know and take the defaults for the rest. You might want to say no to the monitor detection--it has caused X-Windows to crash for some people.

Remove existing fglrx driver

Remove Breezy's included drivers if they are installed:

sudo apt-get remove xorg-driver-fglrx
sudo apt-get remove fglrx-control
sudo apt-get remove linux-restricted-modules-$(uname -r)
sudo dpkg-reconfigure xserver-xorg #select the "ati" module

Reboot.

Installing the new driver

Download the ATI driver installer: Click here

All Platforms:

Change to the download directory. Make sure that you have the universe and multiverse repositories enabled before doing these steps. Sample sources.list

sudo apt-get install gcc-3.4 module-assistant build-essential 
sudo apt-get install fakeroot dh-make debconf libstdc++5 gcc-3.3-base
sudo sh ./ati-driver-installer-8.19.10-i386.run --buildpkg Ubuntu/breezy
sudo dpkg -i /tmp/xorg-driver-fglrx_8.19.10-1_i386.deb
sudo dpkg -i /tmp/fglrx-control_8.19.10-1_i386.deb
sudo dpkg -i /tmp/fglrx-kernel-source_8.19.10-1_i386.deb

Compile the kernel driver:

sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant a-i fglrx

Update the xorg.conf file:

sudo aticonfig --initial

All platforms: Ctrl-Alt-Backspace to restart your session.

Confirm that it worked

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 1.3.5461 (X4.3.0-8.19.10)

Troubleshooting

General

Look for error messages in /var/log/Xorg.0.log and kern.log.

Madwifi Drivers

In order to continue using the madwifi driver you can do the following before removing the linux-restricted-modules package and rebooting.

sudo cp /lib/modules/$(uname -r)/volatile/ath_hal.ko /lib/modules/$(uname -r)/kernel/
sudo depmod -a $(uname -r)

Kernel module not working after upgrade from 8.18.xx

I manually built this driver as described back when 8.18.8 was released. Once 8.19.10 got released, I followed the same steps to rebuild. Unfortunately every time the kernel module was built, it wanted to remove it because it couldnt satisfy the xorg fglrx driver 8.18.8. I looked in /usr/src/ and saw a deb file that I was assuming was being rebuilt. I followed these steps to properly rebuild:

sudo rm /usr/src/fglrx-kernel-*
sudo module-assistant a-i fglrx