Ubuntu Precise Installation Guide: Difference between revisions

From cchtml.com
(version change)
 
(101 intermediate revisions by 59 users not shown)
Line 1: Line 1:
  __TOC__
  __TOC__


= The Options =
k8EgXE I appreciate you sharing this blog article.Really looking forward to read more. Much obliged.
Users with ATI cards have the following driver options:
* '''vesa''' - very basic, lacks 2D/3D acceleration, and focuses on compatibility with all VESA-compliant graphics cards. It is good for starting the GUI environment when no accelerated driver is available/working, and little else.
* '''ati''' - actually a thin wrapper that will invoke the radeon driver (or another ati open-source driver for pre-Radeon cards).
* '''radeon''' - open source driver supporting all Radeon cards. This driver has excellent 2D acceleration and compatibility with the Linux graphics stack. 3D acceleration is sufficient for desktop effects and a nice set of native Linux games. Power management is now comparable to the Catalyst driver.
* '''Catalyst (a.k.a fglrx)''' a proprietary "blob" (closed source binary) driver designed by ATI, with 3D code based off of their Windows driver. Only RadeonHD chips are supported on recent Linux distros.


= Updated Open Source Driver PPA's =
C74Djm Enjoyed every bit of your blog.Thanks Again. Awesome.
* '''"Ubuntu-X"''' : This PPA offers the latest stable releases of video driver-related components. Follow the instructions at: https://launchpad.net/~ubuntu-x-swat/+archive/x-updates
* '''Xorg-edgers''': This bleeding-edge PPA offers video driver-related components straight from their code (git) repositories. Follow the instructions at: https://launchpad.net/~xorg-edgers/+archive/ppa


= Installing Proprietary Drivers a.k.a. Catalyst/fglrx =
= Installing Proprietary Drivers a.k.a. Catalyst/fglrx =
*PLEASE READ FIRST!
*PLEASE READ FIRST!
'''Which cards are no longer supported by ATI?'''
'''Which cards are no longer supported by ATI?'''
The ATI Radeon 9500-9800, Xpress200-1250, 690G, 740G, X300-X2500 (including Mobility RadeonHD 2300, since it is really a DirectX 9 part).  See the complete list [http://wiki.cchtml.com/index.php/9.4 here.]
The ATI Radeon 9500-9800, Xpress200-1250, 690G, 740G, X300-X2500 (including Mobility RadeonHD 2300, since it is really a DirectX 9 part).  See the complete list [[9.4|here.]]
If your card is on that list, you are limited to open-source drivers on Ubuntu Lucid/10.04 (and later). If you really need the proprietary Catalyst/fglrx driver, you will have to use an older Linux distribution, such as Debian Lenny/5.0.x or Ubuntu Hardy/8.04.x.
If your card is on that list, you are limited to open-source drivers on Ubuntu Lucid/10.04 (and later). If you really need the proprietary Catalyst/fglrx driver, you will have to use an older Linux distribution, such as Debian Lenny/5.0.x or Ubuntu Hardy/8.04.x.
{| WIDTH="650" cellpadding=0 cellspacing=0 style="background-color: red; border: solid 1px #666666; color: #ffffff; text-align: center;"  
{| WIDTH="650" cellpadding=0 cellspacing=0 style="background-color: red; border: solid 1px #666666; color: #ffffff; text-align: center;"  
Line 21: Line 14:
|-  
|-  
| <br />NOTE: If you enter your card information on AMD/ATI's driver page, it will offer you the Catalyst 9-3 driver to download. However, the Catalyst 9-3 driver doesn't support X servers past 1.5, and it will not work with Precise (or anything later than Lucid/10,04)! !!!SO BE CAREFUL!!! If you tried to install Catalyst on a system with one of these cards, see the 'Removing the Driver' section to restore the default/pre-installed drivers.<br /><br />
| <br />NOTE: If you enter your card information on AMD/ATI's driver page, it will offer you the Catalyst 9-3 driver to download. However, the Catalyst 9-3 driver doesn't support X servers past 1.5, and it will not work with Precise (or anything later than Lucid/10,04)! !!!SO BE CAREFUL!!! If you tried to install Catalyst on a system with one of these cards, see the 'Removing the Driver' section to restore the default/pre-installed drivers.<br /><br />
|}
{| WIDTH="650" cellpadding=0 cellspacing=0 style="background-color: red; border: solid 1px #666666; color: #ffffff; text-align: center;"
| style="background-color: #666666; border: solid 1px #666666; border-bottom: 1px solid #888;" | <font size="-1">'''ATTENTION RADEONHD 2x00-4xx0 series USERS'''</font>
|-
| <br />NOTE: The last Catalyst release to support your card is the 12-6 Legacy release:
|  wget http://www2.ati.com/drivers/legacy/12-6/amd-driver-installer-12.6-legacy-x86.x86_64.zip.<br />
|  wget http://www2.ati.com/drivers/legacy/amd-driver-installer-12.6-legacy-x86.x86_64.zip <br /> <br />
|}
|}


Line 36: Line 37:


== Installing Catalyst Manually (from AMD/ATI's site) ==
== Installing Catalyst Manually (from AMD/ATI's site) ==
IMPORTANT NOTE: Installing Catalyst 12-4 on 32-bit Precise currently requires a patch. It is recommended to use the fglrx package from Ubuntu instead, but the patch procedure can be found here: http://ubuntuforums.org/showthread.php?t=1969827


I recommend copying and pasting the commands to ensure there are no typing mistakes and speed up the install process. Remember to use Ctrl '''+ Shift''' + V or Shift + Insert to paste into the terminal (or go to the terminals menu, select edit and click paste).
I recommend copying and pasting the commands to ensure there are no typing mistakes and speed up the install process. Remember to use Ctrl '''+ Shift''' + V or Shift + Insert to paste into the terminal (or go to the terminals menu, select edit and click paste).
Line 49: Line 48:


''If you are using the x86_64 architecture (64 bit)'':
''If you are using the x86_64 architecture (64 bit)'':
  sudo apt-get install ia32-libs-multiarch:i386 lib32gcc1 libc6-i386
  sudo apt-get install lib32gcc1  
cd /usr ; sudo ln -svT lib /usr/lib64
 
If your ''/etc/modprobe.d/blacklist-local.conf'' contains ''blacklist fglrx'' make sure you comment out this line by adding a ''#'' in front of it.


===''Download the latest Catalyst package.''===
===''Download the latest Catalyst package.''===
This package contains both the 32-bit and 64-bit driver.
This package contains both the 32-bit and 64-bit driver.
  cd ~/; mkdir catalyst{{Catalystversion}}; cd catalyst{{Catalystversion}}/
 
wget <nowiki>http://www2.ati.com/drivers/linux/amd-driver-installer-</nowiki>{{Catalystdashversion}}-x86.x86_64.run
  wget --referer='http://support.amd.com/en-us/download/desktop?os=Linux+x86' http://www2.ati.com/drivers/linux/amd-catalyst-13.12-linux-x86.x86_64.zip
  chmod +x amd-driver-installer-{{Catalystdashversion}}-x86.x86_64.run
  unzip amd-catalyst-13.12-linux-x86.x86_64.zip


===''Create and install .deb packages.'' ===
===''Create and install .deb packages.'' ===
  sh ./amd-driver-installer-{{Catalystdashversion}}-x86.x86_64.run --buildpkg Ubuntu/precise
  sudo sh amd-driver-installer-14.20-x86.x86_64.run --buildpkg Ubuntu/precise
  sudo dpkg -i fglrx*.deb
  sudo dpkg -i fglrx*.deb


If building .deb packages fails, there is also an [http://wiki.cchtml.com/index.php/Ubuntu_Precise_Installation_Guide#Alternative_Manual_Installation Alternative Manual Installation]
If building .deb packages fails, there is also an [[#Alternative_Manual_Installation|Alternative Manual Installation]]


===''In case of failure:''===
===''In case of failure:''===
Line 76: Line 76:
If all else fails, revert your xorg.conf and reboot.
If all else fails, revert your xorg.conf and reboot.


  sudo cp /etc/X11/xorg.conf.orig /etc/X11/xorg.conf
  sudo cp /etc/X11/xorg.conf.original-0 /etc/X11/xorg.conf


This should return your original display.
This should return your original display.
Line 84: Line 84:
Unfortunately, there is no sure way to generate the ATI version of the Xorg.conf file.  It is entirely dependent on your configuration.  The following subsections will attempt to address possible (and tested) variations for their respective configurations.
Unfortunately, there is no sure way to generate the ATI version of the Xorg.conf file.  It is entirely dependent on your configuration.  The following subsections will attempt to address possible (and tested) variations for their respective configurations.


hahhaahahahahah! DO Not do that on your first date, EVER! I love this guys facts though fuck! haahhah. Either way, his tips do make a good point. I ve always like the random profile pics that have been taken straight from the internet. With high contrast resolution and professional lighting. unless theyre a model. Anyways. good stuff. And if you to see to good dating site  go to my profile, and go to the website stated  enjoy .good video man
=== Generic Config ===
This will work for most people:
  sudo amdconfig --initial -f


=== Minimal Config ===
=== Minimal Config ===
Line 110: Line 112:


==''Test your installation''==
==''Test your installation''==
NOTE: if you don't reboot first, fglrxinfo gives an error message.
'''NOTE: if you don't reboot first, fglrxinfo gives an error message.'''
Reboot the computer and type
Reboot the computer and type
  fglrxinfo
  fglrxinfo
Line 125: Line 127:
If you experience issues or a hang, you may need to disable fast TLS.
If you experience issues or a hang, you may need to disable fast TLS.
  sudo amdconfig --tls=0
  sudo amdconfig --tls=0
===Testing 32-bit libraries on 64-bit systems===
On 64-bit systems you need to test both the 64-bit and the 32-bit side
of the driver and libraries, and the 32-bit side is usually the most
important because most 3D games like those based on Valve's ''Source''
engine are delivered as 32-bit binaries.
However both <tt>fglrxinfo</tt> and <tt>glxinfo</tt> are by default 64-bit binaries, so they don't test the 32-bit side of the driver at all. A compromise is to install the 32-bit version of <tt>glxinfo</tt>, by uninstalling <tt>mesa-utils</tt> and installing <tt>mesa-utils:i386</tt>.
Also note that at least in drivers version 13.12 on some versions of
Ubuntu one of the 32-bit components called <tt>fglrx_dri.so</tt> is not installed in the right place, because that has changed. This means that DRI in 32-bit mode is not available and these error messages are given by
the Source engine:
<pre>This system DOES NOT support the OpenGL extension GL_EXT_draw_buffers2.
Could not find required OpenGL entry point 'glColorMaskIndexedEXT'!</pre>
To be sure that the 32-bit libraries and the DRI module are installed in
both the old and new places check:
<pre>/usr/lib32/fglrx/libGL.so.1.2
/usr/lib32/fglrx/dri/fglrx_dri.so
/usr/lib/i386-linux-gnu/dri/fglrx_dri.so</pre>
These are the corresponding locations for the 64-bit libraries and modules:
<pre>/usr/lib/fglrx/libGL.so.1.2
/usr/lib/fglrx/dri/fglrx_dri.so
/usr/lib/x86_64-linux-gnu/dri/fglrx_dri.so</pre>
Also that <tt>/usr/lib32/fglrx/</tt> and <tt>/usr/lib/fglrx/</tt> are both configured in the <tt>ldconfig</tt> paths under <tt>/etc/ld.so.conf.d/</tt>.


===''Just in case''===
===''Just in case''===
Line 151: Line 184:
XBMC has added support for accelerating video using XvBA/libxvba directly, but the support is currently not in the xbmc package in Ubuntu's repositories. To install the XvBA-enabled version of xbmc:
XBMC has added support for accelerating video using XvBA/libxvba directly, but the support is currently not in the xbmc package in Ubuntu's repositories. To install the XvBA-enabled version of xbmc:


  sudo apt-add-repository ppa:wsnipex/xbmc-xvba-eden
  sudo apt-add-repository ppa:wsnipex/xbmc-xvba
  sudo apt-get update
  sudo apt-get update
  sudo apt-get install xbmc
  sudo apt-get install xbmc
sudo amdconfig --set-pcs-u32=MCIL,HWUVD_H264Level51Support,1


== Using the xvba-va Driver (VA-API) ==
== Using the xvba-va Driver (VA-API) ==
Line 187: Line 221:
The uninstall script in the first command will only exist if you downloaded the drivers and installed them directly (rather than building packages as this guide does). Skip the first command if it does not exist.
The uninstall script in the first command will only exist if you downloaded the drivers and installed them directly (rather than building packages as this guide does). Skip the first command if it does not exist.
  sudo sh /usr/share/ati/fglrx-uninstall.sh
  sudo sh /usr/share/ati/fglrx-uninstall.sh
  sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev*
  sudo apt-get remove --purge fglrx fglrx-* fglrx-amdcccle* fglrx-dev*
sudo dpkg-reconfigure xserver-xorg


If you plan on using open-source drivers, you will need to reinstall some packages because Catalyst overwrites or diverts some key 3D libraries with proprietary versions. For more information on this issue, see [https://wiki.ubuntu.com/X/Troubleshooting/FglrxInteferesWithRadeonDriver this Ubuntu wiki page]
If you plan on using open-source drivers, you will need to reinstall some packages because Catalyst overwrites or diverts some key 3D libraries with proprietary versions. For more information on this issue, see [https://wiki.ubuntu.com/X/Troubleshooting/FglrxInteferesWithRadeonDriver this Ubuntu wiki page]
Line 242: Line 277:
=== Intel/ATI Hybrids ===
=== Intel/ATI Hybrids ===


TODO: Status unknown at this time
Follow GUI Installation and choose the basic one "ATI/AMD proprietary FGLRX graphics driver". Let the install finish and it will ask you to reboot. Do not REBOOT.
 
Make a backup of your xorg.conf.
 
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.orig
 
Generate a new config:
 
sudo amdconfig --initial -f
 
Force use of the new xorg.conf.
 
sudo amdconfig --input=/etc/X11/xorg.conf --tls=1
 
Run the following commands to confim your new settings:
 
fglrxinfo
 
and
 
fgl_glxgears
 
Once all done, Reboot.
 
Relogin and try the following command to see your Graphics card status:
 
sudo lshw -C display
 
Re-open "Additional Drivers" settings and you will see "ATI/AMD proprietary FGLRX graphics driver" status as "This driver is activated and currently in use". Open "AMD Catalyst Control Center" to see more options.
 
Tested on my Intel Gen 2/RadeonHD7550 gfx cards on a Samsung NP530U4B-S01AU Laptop. This solved a general overheating and crashing of AMD Catalyst Control Center issues.
 
Extra: I completely solved overheating issue with Jupiter Applet. (http://www.webupd8.org/2010/07/jupiter-ubuntu-ppa-hardware-and-power.html) on the same laptop. More comments on this would be appreciated.


== Build Fails and Log Shows "mixed implicit and normal rules.  Stop." ==
== Build Fails and Log Shows "mixed implicit and normal rules.  Stop." ==
Line 254: Line 321:
Launchpad link for this bug: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/555957
Launchpad link for this bug: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/555957


How could any of this be better satetd? It couldn't.
== "Errors were encountered while processing: fglrx-amdcccle" (on 64-bit systems) ==
Most likely, you probably did not have the ia32-libs-multiarch:i386 lib32gcc1 libc6-i386 packages installed beforehand. If you have a 64 bit install, the above dpkg command may complain that "Errors were encountered while processing: fglrx-amdcccle".  This is because of a dependency of the amdccle package on 32 bit libraries.  If you receive this error, use the following command, which will force the installation of all of the 32 bit dependencies, and then the amdcccle package:
 
sudo apt-get -f install
 
Catalyst {{Template:Catalystversion}} on 64-bit systems may require the ''--force-overwrite'' command in the above ''dpkg'' command:
sudo dpkg -i --force-overwrite fglrx*.deb


== Problems Starting Xserver ==
== Problems Starting Xserver ==
Line 286: Line 359:
This can happen if your card's PCI ID wasn't officially certified to work with a particular version of Catalyst. It does not necessarily mean that your card is unsupported, but it does mean that you shouldn't file bugs with that particular card/driver combination. If you installed the driver by downloading it from AMD/ATI, installing a newer version of Catalyst will probably help.  
This can happen if your card's PCI ID wasn't officially certified to work with a particular version of Catalyst. It does not necessarily mean that your card is unsupported, but it does mean that you shouldn't file bugs with that particular card/driver combination. If you installed the driver by downloading it from AMD/ATI, installing a newer version of Catalyst will probably help.  


If you installed the proprietary driver included with Ubuntu or you do not want to upgrade to a newer version, it may be possible to work around the issue by using a control file from a newer version of Catalyst than the one you're running.
If you installed the proprietary driver included with Ubuntu or you do not want to upgrade to a newer version, it may be possible to work around the issue by using a control file from a older version of Catalyst than the one you're running.
  cd ~/; mkdir catalyst{{Catalystversion}}; cd catalyst{{Catalystversion}}/
  cd ~/; mkdir catalyst12.4; cd catalyst12.4/
  wget <nowiki>http://www2.ati.com/drivers/linux/amd-driver-installer-</nowiki>{{Catalystdashversion}}-x86.x86_64.run
  wget <nowiki>http://www2.ati.com/drivers/linux/amd-driver-installer-</nowiki>12-4-x86.x86_64.run
  chmod +x amd-driver-installer-{{Catalystdashversion}}-x86.x86_64.run
  chmod +x amd-driver-installer-12-4-x86.x86_64.run
  sh amd-driver-installer-{{Catalystdashversion}}-x86.x86_64.run --extract driver
  sh amd-driver-installer-12-4-x86.x86_64.run --extract driver
  sudo mv /etc/ati/control ~/control.bak
  sudo mv /etc/ati/control ~/control.bak
  sudo cp driver/common/etc/ati/control /etc/ati
  sudo cp driver/common/etc/ati/control /etc/ati
Line 363: Line 436:
This can happen when your /tmp folder is mounted with the option "noexec". The noexec is suggested by many howtos regarding Ubuntu on SSD, when placing the /tmp in memory.
This can happen when your /tmp folder is mounted with the option "noexec". The noexec is suggested by many howtos regarding Ubuntu on SSD, when placing the /tmp in memory.
A workaround can be found here: [http://serialized.net/2010/03/getting-around-tmpfs-noexec-problems/]
A workaround can be found here: [http://serialized.net/2010/03/getting-around-tmpfs-noexec-problems/]
== Errors during deb generation ==
You may recieve errors if you do not have devscripts, dh-make, execstack and dh-modaliases installed. Run apt-get to install, and the errors go away and the deb is generated correctly.
If you recieve the error dpkg-buildpackage: not found:
sudo apt-get install devscripts
If you recieve the error make: dh: command not found:
sudo apt-get install dh-make
If you recieve the error make: execstack: Command not found:
sudo apt-get install execstack
If you recieve the error make: dh_modaliases: Command not found:
sudo apt-get install dh-modaliases


== Black screen after uninstalling old amd drivers ==
== Black screen after uninstalling old amd drivers ==

Latest revision as of 00:20, 13 July 2017

k8EgXE I appreciate you sharing this blog article.Really looking forward to read more. Much obliged.

C74Djm Enjoyed every bit of your blog.Thanks Again. Awesome.

Installing Proprietary Drivers a.k.a. Catalyst/fglrx

  • PLEASE READ FIRST!

Which cards are no longer supported by ATI? The ATI Radeon 9500-9800, Xpress200-1250, 690G, 740G, X300-X2500 (including Mobility RadeonHD 2300, since it is really a DirectX 9 part). See the complete list here. If your card is on that list, you are limited to open-source drivers on Ubuntu Lucid/10.04 (and later). If you really need the proprietary Catalyst/fglrx driver, you will have to use an older Linux distribution, such as Debian Lenny/5.0.x or Ubuntu Hardy/8.04.x.

ATTENTION RADEON USERS

NOTE: If you enter your card information on AMD/ATI's driver page, it will offer you the Catalyst 9-3 driver to download. However, the Catalyst 9-3 driver doesn't support X servers past 1.5, and it will not work with Precise (or anything later than Lucid/10,04)! !!!SO BE CAREFUL!!! If you tried to install Catalyst on a system with one of these cards, see the 'Removing the Driver' section to restore the default/pre-installed drivers.

ATTENTION RADEONHD 2x00-4xx0 series USERS

NOTE: The last Catalyst release to support your card is the 12-6 Legacy release:
wget http://www2.ati.com/drivers/legacy/12-6/amd-driver-installer-12.6-legacy-x86.x86_64.zip.
wget http://www2.ati.com/drivers/legacy/amd-driver-installer-12.6-legacy-x86.x86_64.zip

Using Ubuntu-supplied fglrx/Catalyst

This may not give you the latest drivers, but should be safest. On Ubuntu Precise, this will install Catalyst 8.960, which is roughly equivalent to Catalyst 12-4. NOTE: You must have the restricted repository enabled in Applications -> Ubuntu Software Center -> Edit -> Software Sources... for this to work. After you complete the install, skip to Generate a new /etc/X11/xorg.conf file.

Command line

sudo apt-get install fglrx fglrx-amdcccle

GUI

You must have jockey-common and jockey-gtk (or jockey-kde for Kubuntu) packages installed. For the default Ubuntu desktop (Unity), go to the dashboard home and search for "Additional Drivers" in the applications search field (or double-click the "available driver" notification icon) and activate the "ATI/AMD proprietary FGLRX graphics driver".

Installing Catalyst Manually (from AMD/ATI's site)

I recommend copying and pasting the commands to ensure there are no typing mistakes and speed up the install process. Remember to use Ctrl + Shift + V or Shift + Insert to paste into the terminal (or go to the terminals menu, select edit and click paste).

Before you start

If you have previously attempted installing Catalyst, remove any leftover files by following the Removing the Driver section. Make sure universe and multiverse are enabled in your repository sources (System -> Administration -> Software Sources). or Applications->Ubuntu Software Center->Edit->Software sources->Other software: check canonical partners.

Install the prerequisite packages:

sudo apt-get install build-essential cdbs dh-make dkms execstack dh-modaliases fakeroot libqtgui4

If you are using the x86_64 architecture (64 bit):

sudo apt-get install lib32gcc1 

If your /etc/modprobe.d/blacklist-local.conf contains blacklist fglrx make sure you comment out this line by adding a # in front of it.

Download the latest Catalyst package.

This package contains both the 32-bit and 64-bit driver.

wget --referer='http://support.amd.com/en-us/download/desktop?os=Linux+x86' http://www2.ati.com/drivers/linux/amd-catalyst-13.12-linux-x86.x86_64.zip
unzip amd-catalyst-13.12-linux-x86.x86_64.zip

Create and install .deb packages.

sudo sh amd-driver-installer-14.20-x86.x86_64.run --buildpkg Ubuntu/precise
sudo dpkg -i fglrx*.deb

If building .deb packages fails, there is also an Alternative Manual Installation

In case of failure:

Remember these steps before you reboot your computer.

If the X server fails to start, switch to a new TTY using ctrl+alt+F2. Log in, and attempt to start the X server.

sudo startx

If it fails to start, you will likely see a stacktrace, and immediately above it will be something along the lines of "Could not stat /usr/lib64/fglrx/switchlibGL" which means that you failed to copy the executables properly. Ctrl+c, and immediately copy the switchlibGL and switchlibglx executables to the fglrx folder in /usr/lib64/ or /usr/lib32/.

If all else fails, revert your xorg.conf and reboot.

sudo cp /etc/X11/xorg.conf.original-0 /etc/X11/xorg.conf

This should return your original display.

Generate a new /etc/X11/xorg.conf file

Unfortunately, there is no sure way to generate the ATI version of the Xorg.conf file. It is entirely dependent on your configuration. The following subsections will attempt to address possible (and tested) variations for their respective configurations.

Generic Config

This will work for most people:

sudo amdconfig --initial -f

Minimal Config

A very basic /etc/X11/xorg.conf file might be what you need if you have a new card that's not fully supported by amdconfig. Here follows the entirety of a minimal xorg.conf file for the Radeon HD 6870:

Section "Device"
 Identifier "ATI radeon 6870"
 Driver "fglrx"
EndSection

X2/Dual GPU Cards

If you have an X2 card (e.g. 4870X2 or 5970), use... !!Do not use for two separate cards in crossfire!!

sudo amdconfig --initial -f --adapter=all

Dual/Multi Monitors

If you have a dual monitor display (also known as "Big Desktop"), use:

sudo amdconfig --initial -f
sudo amdconfig --set-pcs-str="DDX,EnableRandR12,FALSE"

This was confirmed in http://phoronix.com/forums/showthread.php?t=18553. Be advised that you may need to manually set the correct refresh rate for your second monitor through catalyst.

Force use of the new xorg.conf (if necessary)

Some people find that changes to xorg.conf don't get used by the driver. To force the ATI driver to adopt changes made to xorg.conf, use the following command:

sudo amdconfig --input=/etc/X11/xorg.conf --tls=1

Test your installation

NOTE: if you don't reboot first, fglrxinfo gives an error message. Reboot the computer and type

fglrxinfo

into the terminal. If the vendor string contains ATI, you have installed the driver successfully. Using fglrxinfo on a system with Catalyst 12-3 and a RadeonHD 4550 returns:

display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 4550 (This line may be different depending on what graphics card you are using.)
OpenGL version string: 3.3.11566 Compatibility Profile Context (This line may be different depending on what graphics card and 
Catalyst version you are using.)

Now, try:

fgl_glxgears

If you experience issues or a hang, you may need to disable fast TLS.

sudo amdconfig --tls=0

Testing 32-bit libraries on 64-bit systems

On 64-bit systems you need to test both the 64-bit and the 32-bit side of the driver and libraries, and the 32-bit side is usually the most important because most 3D games like those based on Valve's Source engine are delivered as 32-bit binaries.

However both fglrxinfo and glxinfo are by default 64-bit binaries, so they don't test the 32-bit side of the driver at all. A compromise is to install the 32-bit version of glxinfo, by uninstalling mesa-utils and installing mesa-utils:i386.

Also note that at least in drivers version 13.12 on some versions of Ubuntu one of the 32-bit components called fglrx_dri.so is not installed in the right place, because that has changed. This means that DRI in 32-bit mode is not available and these error messages are given by the Source engine:

This system DOES NOT support the OpenGL extension GL_EXT_draw_buffers2.
Could not find required OpenGL entry point 'glColorMaskIndexedEXT'!

To be sure that the 32-bit libraries and the DRI module are installed in both the old and new places check:

/usr/lib32/fglrx/libGL.so.1.2
/usr/lib32/fglrx/dri/fglrx_dri.so
/usr/lib/i386-linux-gnu/dri/fglrx_dri.so

These are the corresponding locations for the 64-bit libraries and modules:

/usr/lib/fglrx/libGL.so.1.2
/usr/lib/fglrx/dri/fglrx_dri.so
/usr/lib/x86_64-linux-gnu/dri/fglrx_dri.so

Also that /usr/lib32/fglrx/ and /usr/lib/fglrx/ are both configured in the ldconfig paths under /etc/ld.so.conf.d/.

Just in case

Write down or remember this series of Alt+PrntScr key combinations, just in case your screen should go black and Ctrl+Alt+F1 and Ctrl+Alt+Backspace doesn't work.

Alt+PrntScr+r, Alt+PrntScr+s, Alt+PrntScr+e, Alt+PrntScr+i, Alt+PrntScr+n, Alt+PrntScr+u, Alt+PrntScr+b

These key-presses will reboot the system safely. To remember the key-presses, remember this nonsensical phrase: "Raising Skinny Elephants Is Never Utterly Boring".

An alternative would be to hold down Ctrl+Alt+SysRq (SysRq is usually the same key as PrintScreen) and type very slowly R E I S U B. A way to remember this is by inverting the word: "BUSIER" or remembering a phrase: "Restart Even If System Utterly Broken". This would also safely shutdown the system.

Alternative Manual Installation

WARNING: This method is incompatible with Debian/Ubuntu Filesystem Hierarchy and may cause issues, especially when trying to remove or upgrade Catalyst. It is highly recommended to build .deb pakages. USE AT OWN RISK.

This is another method of manual installation that may work best for laptop users who have a hybrid setup (i.e. Intel HD onboard graphics with an AMD discrete GPU).

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.orig
./amd-driver-installer-15-12-x86/x86_64.run

Click "Install Driver on X.Org" rather than "Generate distribution specific driver package". Select the "Automatic" install option.

Hardware Video Decode Acceleration (EXPERIMENTAL)

Using XBMC player (XvBA)

XBMC has added support for accelerating video using XvBA/libxvba directly, but the support is currently not in the xbmc package in Ubuntu's repositories. To install the XvBA-enabled version of xbmc:

sudo apt-add-repository ppa:wsnipex/xbmc-xvba
sudo apt-get update
sudo apt-get install xbmc
sudo amdconfig --set-pcs-u32=MCIL,HWUVD_H264Level51Support,1

Using the xvba-va Driver (VA-API)

This is confirmed to work for newer RadeonHD GPU's (those with UVD2). If you have a RadeonHD 4000-series or newer, you have UVD2. To see the complete list: http://en.wikipedia.org/wiki/Unified_Video_Decoder#UVD_enabled_GPUs

sudo apt-get install xvba-va-driver libva-glx1 libva-x11-1 vainfo
vainfo

vainfo should return something like the following (and no errors):

     libva: libva version 0.32.0
     Xlib:  extension "XFree86-DRI" missing on display ":0.0".
     libva: va_getDriverName() returns 0
     libva: Trying to open /usr/lib/dri/fglrx_drv_video.so
     libva: va_openDriver() returns 0
     vainfo: VA API version: 0.32
     vainfo: Driver version: Splitted-Desktop Systems XvBA backend for VA-API - 0.7.8
     vainfo: Supported profile and entrypoints
     VAProfileH264High               :	VAEntrypointVLD
     VAProfileVC1Advanced            :	VAEntrypointVLD

If vainfo returns an error, you may need to create a symlink:

sudo ln -s /usr/lib/va/drivers/fglrx_drv_video.so /usr/lib/x86_64-linux-gnu/dri/fglrx_drv_video.so  #for 64-bit
sudo ln -s /usr/lib/va/drivers/fglrx_drv_video.so /usr/lib/dri/fglrx_drv_video.so  #for 32-bit
     

Once you've confirmed that vainfo is correct, you can test video playback. A good test player for xvba is VLC. You can enable xvba in Tools -> Preferences -> Input and Codecs. Check the box named "Use GPU acceleration (experimental)" and then restart VLC.

Updating Catalyst/fglrx

DO NOT try to install a new version over an old one. Follow the 'Removing Catalyst/fglrx' section below to remove your existing driver, and then you can start at 'Downloading the latest Catalyst' to install the new one.

Removing Catalyst/fglrx

The uninstall script in the first command will only exist if you downloaded the drivers and installed them directly (rather than building packages as this guide does). Skip the first command if it does not exist.

sudo sh /usr/share/ati/fglrx-uninstall.sh
sudo apt-get remove --purge fglrx fglrx-* fglrx-amdcccle* fglrx-dev*
sudo dpkg-reconfigure xserver-xorg

If you plan on using open-source drivers, you will need to reinstall some packages because Catalyst overwrites or diverts some key 3D libraries with proprietary versions. For more information on this issue, see this Ubuntu wiki page

sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
sudo apt-get install xserver-xorg-video-ati
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core
sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
sudo rm -rf /etc/ati

If you receive

$ E: Internal Error, No file name for libgl1-mesa-dri

Change the third command above to:

sudo apt-get install --reinstall libgl1-mesa-glx:i386 libgl1-mesa-glx:amd64 libgl1-mesa-dri:i386 libgl1-mesa-dri:amd64 xserver-xorg-core

Issues

Video Tearing

AMD/ATI claims that the "Tear Free Video" option is enabled by default, but that wasn't the case with Catalyst 12-3 installed on Kubuntu 12.04. If you're having issues with tearing, make sure that "Tear Free Video" is on. You can find this option in the Catalyst Control Center under 'Display Options' or you can use the following command:

sudo amdconfig --sync-video=on

The option will not take effect until you restart X (i.e. log out).

If you're using compositing, you should also make sure that vsync is enabled in the compositor's settings. I found that vsync was enabled by default, but here are the appropriate settings should you want to experiment.

kwin

You can enable vsync for kwin in System Settings -> Desktop Effects -> Advanced tab

Compiz (Unity/GNOME-Shell)

TODO: See if there's a friendlier way to make sure vsync is enabled without installing ccsm.

Install the compiz settings manager:

sudo apt-get install compizconfig-settings-manager
ccsm

The 'Sync to Vblank' is found in the 'OpenGL' subsection of the 'General' group

Hybrid Graphics and Catalyst

There are two basic types of hybrid designs. Older hybrid systems use a multiplexor (mux) to switch between GPU's. Newer systems (those with PowerXpress >= 4.0) are muxless. As far as I can tell, PowerXpress 4.0 started with RadeonHD 6000-series GPU's, and systems with older ATI GPU's have a mux, but don't quote that.

ATI/ATI Hybrids

As of Catalyst 11-8, switching between two ATI cards (and maybe Intel/ATI muxless too?) is supposed to be doable, though I don't know if that applies to all ATI/ATI hybrids or only the muxless ones. One would use amdconfig's PowerXpress options to switch back and forth between the integrated and discrete cards, like so:

amdconfig --pxl            # List current activated GPU
sudo amdconfig --px-dgpu   # Activate discrete GPU (High-Performance mode), must re-start X to take effect
sudo amdconfig --px-igpu   # Activate integrated GPU (Power-Saving mode), must re-start X to take effect

After switching, one would log out and back in to restart X.

Intel/ATI Hybrids

Follow GUI Installation and choose the basic one "ATI/AMD proprietary FGLRX graphics driver". Let the install finish and it will ask you to reboot. Do not REBOOT.

Make a backup of your xorg.conf.

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.orig

Generate a new config:

sudo amdconfig --initial -f

Force use of the new xorg.conf.

sudo amdconfig --input=/etc/X11/xorg.conf --tls=1

Run the following commands to confim your new settings:

fglrxinfo

and

fgl_glxgears

Once all done, Reboot.

Relogin and try the following command to see your Graphics card status:

sudo lshw -C display

Re-open "Additional Drivers" settings and you will see "ATI/AMD proprietary FGLRX graphics driver" status as "This driver is activated and currently in use". Open "AMD Catalyst Control Center" to see more options.

Tested on my Intel Gen 2/RadeonHD7550 gfx cards on a Samsung NP530U4B-S01AU Laptop. This solved a general overheating and crashing of AMD Catalyst Control Center issues.

Extra: I completely solved overheating issue with Jupiter Applet. (http://www.webupd8.org/2010/07/jupiter-ubuntu-ppa-hardware-and-power.html) on the same laptop. More comments on this would be appreciated.

Build Fails and Log Shows "mixed implicit and normal rules. Stop."

If the installation fails and you find the above message in /var/lib/dkms/fglrx/<version_number>/build/make.log, it may be because you're using a pentium-build wrapper around gcc. See what the following ls command returns:

ls -la /usr/bin/gcc

If it shows that gcc is a link to builder-cc, temporarily redirect the link to point to the real gcc (gcc-4.6 in Ubuntu Precise). This should allow you to install fglrx:

sudo ln -sf /usr/bin/gcc-4.6 /usr/bin/gcc

When you're finished installing the driver, return the gcc link to its original value:

sudo ln -sf /usr/bin/builder-cc /usr/bin/gcc

Launchpad link for this bug: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/555957

"Errors were encountered while processing: fglrx-amdcccle" (on 64-bit systems)

Most likely, you probably did not have the ia32-libs-multiarch:i386 lib32gcc1 libc6-i386 packages installed beforehand. If you have a 64 bit install, the above dpkg command may complain that "Errors were encountered while processing: fglrx-amdcccle". This is because of a dependency of the amdccle package on 32 bit libraries. If you receive this error, use the following command, which will force the installation of all of the 32 bit dependencies, and then the amdcccle package:

sudo apt-get -f install

Catalyst 15.12 on 64-bit systems may require the --force-overwrite command in the above dpkg command:

sudo dpkg -i --force-overwrite fglrx*.deb

Problems Starting Xserver

If you get a black screen hang, the first thing to check is if xorg.conf is the problem.

You can disable the xorg.conf with:

sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.disabled

Reboot and check to see if things work now.

You can reinstate the file with:

sudo mv /etc/X11/xorg.conf.disabled /etc/X11/xorg.conf

Before tweaking ACPI settings, try ensuring /dev/null is chmodded to 0666. This intermittently changes when using the nano (and possibly other) editors with sudo and the group/world permissions are unset. This leads to the ATI drivers hanging on boot or otherwise. A quick and dirty init script saved as /etc/init/chmodnull does the trick -

start on filesystem
script

chmod 0666 /dev/null chmod 0666 /lib/udev/devices/null

end script

This has been tested using Ubuntu 10.04 64-bit on a ATI Radeon HD 4830 (HP Envy 15-1060ea). It's worth noting that I had to disable TLS (amdconfig --tls=0) to get things to stay stable!

If you've properly installed the driver, but experience problems when starting the X server, such as hanging, black/white/gray screen, distortion, etc., your system BIOS may have a buggy ACPI implementation. To work around, press Ctrl+Alt+F1 to get to a terminal (or failing that, boot to recovery mode) and run:

sudo amdconfig --acpi-services=off

If this method works, you should consider checking your system vendor's BIOS changelogs for relevant ACPI fixes, updating your BIOS, and reenabling the driver's ACPI services.

Unsupported Hardware Watermark

This can happen if your card's PCI ID wasn't officially certified to work with a particular version of Catalyst. It does not necessarily mean that your card is unsupported, but it does mean that you shouldn't file bugs with that particular card/driver combination. If you installed the driver by downloading it from AMD/ATI, installing a newer version of Catalyst will probably help.

If you installed the proprietary driver included with Ubuntu or you do not want to upgrade to a newer version, it may be possible to work around the issue by using a control file from a older version of Catalyst than the one you're running.

cd ~/; mkdir catalyst12.4; cd catalyst12.4/
wget http://www2.ati.com/drivers/linux/amd-driver-installer-12-4-x86.x86_64.run
chmod +x amd-driver-installer-12-4-x86.x86_64.run
sh amd-driver-installer-12-4-x86.x86_64.run --extract driver
sudo mv /etc/ati/control ~/control.bak
sudo cp driver/common/etc/ati/control /etc/ati

Hang at logout

If you experience hangs when logging out (of X) it is probably due to the /etc/ati/authatieventsd.sh script looking for X authorization files in the wrong place when it starts up. You can kill the hanging authatieventsd.sh processes from a console tty to allow the shutdown of the X server.

Before the following commands verify that /etc/ati/authatieventsd.sh exists after build and install, if not just do: (assuming that the installer is in the directory we used to install)

cd ~/catalyst15.12
sh amd-driver-installer-15.12-x86.x86_64.run --extract driver
sudo cp driver/packages/Ubuntu/dists/lucid/replacements/authatieventsd.sh /etc/ati/authatieventsd.sh
sudo chmod +x /etc/ati/authatieventsd.sh

This problem can be fixed permanently with:

sudo mkdir -p /var/lib/xdm/authdir
sudo ln -s /var/run/xauth /var/lib/xdm/authdir/authfiles

If that doesn't work then you can disable atieventsd with this command:

sudo /usr/sbin/update-rc.d -f atieventsd remove

You'll have to restart for this to take effect.

Can't remove fglrx with dpkg (diversion issue)

If dpkg refuses to remove an fglrx package and complains about a diversion of a file, you might need to manually remove it. For example, if dpkg complains:

dpkg-divert: mismatch on divert-to
  when removing `diversion of /usr/lib/libGL.so.1.2 to /usr/share/fglrx/diversions/libGL.so.1.2 by xorg-driver-fglrx'
  found `diversion of /usr/lib/libGL.so.1.2 to /usr/lib/fglrx/libGL.so.1.2.xlibmesa by xorg-driver-fglrx'

then:

sudo dpkg-divert --remove /usr/lib/libGL.so.1.2

This module/version combo is already installed

If you get this error-message, simply uninstall the previous version before installing the new one with:

sudo dkms remove -m fglrx --all

New kernel installed?

In theory, DKMS should automatically install the fglrx kernel module for your new kernel the first time you boot it. Should you need to manually install it:

sudo dkms build -m fglrx -k `uname -r`
sudo dkms install -m fglrx -k `uname -r`

if amdcccle doesn't work and says Identifier is not a valid word. Use lower case letter in xorg.conf

amdconfig not found after installation

This scenario is possible when the driver installation has seemingly succeeded and is possibly related to previous fglrx installs, including those through Jockey (i.e. you first used drivers provided by Ubuntu but then upgraded to ones available from AMD's website). When doing amdconfig --initial after driver installation, you might end up not having the amdconfig available at all:

amdconfig: command not found

After booting you might receive X error '(EE) Failed to load module "fglrx" (module does not exist, 0)'. These do not necessarily indicate that the installation has failed completely. On command line, do

ls /usr/lib/fglrx/bin

and see if the command lists some Ati related programs. If they are listed but not found from /usr/bin, it is possible that the "update-alternatives" fglrx .deb installation does has been ignored. See man update-alternatives for more information about the concept and workings of alternatives. In practice, update-alternatives is supposed to create several symbolic links to the files in the fglrx directory, but it will be ignored if the alternatives for the very related gl_conf entry has been set to manual. Do

update-alternatives --get-selections | grep gl_conf

and see if the mode is manual instead of auto and if mesa is mentioned instead of fglrx in the path that is printed. In this case you need to

sudo update-alternatives --set gl_conf /usr/lib/fglrx/ld.so.conf

to set fglrx as the active alternative. You can alternatively (no pun intended) and additionally change the gl_conf into automatic mode before the installation this way:

sudo update-alternatives --auto gl_conf

After that, the alternatives should automatically be configured correctly when the graphics driver .debs are installed.

"update-alternatives: error" during install

During installation you may receive the following message:

update-alternatives: error: unable to make /usr/lib/xorg/modules/drivers/fglrx_drv.so.dpkg-tmp a symlink to /etc/alternatives/fglrx_drv: No such file or directory

This can be easily solved by creating directory "drivers" under /usr/lib/xorg/modules/

sudo mkdir /usr/lib/xorg/modules/drivers

'Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507.' during deb generation

During installation you may receive the following message:

Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507.

This can happen when your /tmp folder is mounted with the option "noexec". The noexec is suggested by many howtos regarding Ubuntu on SSD, when placing the /tmp in memory. A workaround can be found here: [1]

Errors during deb generation

You may recieve errors if you do not have devscripts, dh-make, execstack and dh-modaliases installed. Run apt-get to install, and the errors go away and the deb is generated correctly.

If you recieve the error dpkg-buildpackage: not found:

sudo apt-get install devscripts

If you recieve the error make: dh: command not found:

sudo apt-get install dh-make

If you recieve the error make: execstack: Command not found:

sudo apt-get install execstack

If you recieve the error make: dh_modaliases: Command not found:

sudo apt-get install dh-modaliases

Black screen after uninstalling old amd drivers

Start you computer in recovery mode and exit to root shell. Remount your partitions in rw mode:

mount -rw -o remount /
...

Go to your download directory and proceed with building and installing the drivers in recovery mode. All should be fine after a reboot.

References