Difference between revisions of "XGL-Ubuntu"

From cchtml.com
Jump to: navigation, search
(QutCSMmJteZysN)
m (Reverted edits by 92.99.234.132 (talk) to last revision by Mooninite)
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Unbelievable how well-wriettn and informative this was.
+
== Xgl/Beryl on Ubuntu/Gnome - the Kombatant Way [updated 6/10/2006] ==
 +
 
 +
So here we are, rewriting the whole guide, just because I found out a more bullet-proof way to do it. I've updated it too, and now instead of Compiz it uses Beryl, which imo is much better and has much more potential.
 +
 
 +
Before we start, I want to make clear that these instructions are targeted for those people using the ATI Proprietary Driver ("fglrx") and having '''WORKING 3D ACCELERATION'''. This is configured in your xorg.conf. To make sure you are "accelerated", running with the new driver, try typing fglrxinfo in a terminal and see what you get. If it talks about ATI then awesome... if it talks about Mesa, you still don't have your driver setup properly (xorg.conf). We have an excellent how-to here in the wiki (here: [[Ubuntu]]), which works - try it out!
 +
 
 +
* If you want the absolute newest stuff, then you're going to have to add some lines to your repositories. So open the /etc/apt/sources.list file as root, and add these lines in order to add the two repositories that are of interest here.
 +
 
 +
    #Beryl Repositories for Dapper Drake (Ubuntu 6.06)
 +
    deb http://ubuntu.beryl-project.org/ dapper main
 +
 
 +
or
 +
 
 +
    #Beryl Repositories for Edgy Eft (Ubuntu 6.10)
 +
    deb http://ubuntu.beryl-project.org/ edgy main
 +
 
 +
* To use the Ubuntu Dapper Drake Beryl SVN daily snapshots, add (also) those repositories:
 +
 
 +
    # Treviño's Beryl-SVN Ubuntu Repository
 +
    # GPG key: 81836EBF
 +
    deb http://3v1n0.tuxfamily.org dapper beryl-svn
 +
 
 +
or
 +
 
 +
    # Treviño's Beryl-SVN Ubuntu Edgy Eft Repository
 +
    # GPG key: 81836EBF
 +
    deb http://3v1n0.tuxfamily.org edgy beryl-svn
 +
 
 +
 
 +
* After you add the repos in the sources.list file, issue the following commands:
 +
 
 +
    wget http://ubuntu.beryl-project.org/root@lupine.me.uk.gpg -O- | sudo apt-key add -
 +
 
 +
    sudo apt-get update
 +
 
 +
    sudo apt-get install xserver-xgl libgl1-mesa xserver-xorg libglitz-glx1 beryl emerald-themes
 +
 
 +
* If during the apt-get installation you get the error ''"trying to overwrite `/usr/share/man/man1/Xserver.1x.gz', which is also in package xserver-xorg-core"'' issue the following two commands to continue:
 +
 
 +
    sudo dpkg-divert --package xserver-xorg-core --divert /usr/share/man/man1/Xserver.1x.gz.xgl --rename /usr/share/man/man1/Xserver.1x.gz
 +
 
 +
    sudo apt-get -f install
 +
 
 +
* Instead of messing with gdm.conf and gdm.conf-custom, we're going to do something better. From the terminal, issue the command:
 +
 
 +
    sudo gedit /usr/bin/startxgl.sh
 +
 
 +
and add these as contents:
 +
 
 +
    Xgl -fullscreen :1 -ac -accel glx:pbuffer -accel xv:pbuffer &
 +
    sleep 2 && DISPLAY=:1 exec gnome-session
 +
 
 +
Save it, and then issue the command:
 +
 
 +
    sudo chmod 755 /usr/bin/startxgl.sh
 +
 
 +
* From the terminal again:
 +
 
 +
    sudo gedit /usr/share/xsessions/xgl.desktop
 +
 
 +
and add this as its contents:
 +
 
 +
    [Desktop Entry]
 +
    Encoding=UTF-8
 +
    Name=XGL
 +
    Exec=/usr/bin/startxgl.sh
 +
    Icon=
 +
    Type=Application
 +
 
 +
* So here's the trick. What we've done is to add a new session in GDM. This means that, when GDM loads, you can select the "Xgl" session instead of the normal session you usually use, and it'll load XGL. That way, if something goes horribly wrong, you can simply reboot, and when gdm loads , you will be able to select your normal (and working) session again without editing files all the time.
 +
 
 +
* After all that, we are ready. Reboot your machine (yes, reboot) and when GDM loads, look at the sessions; if you see an "XGL" session there, everything's going according to plan. Load it up (make it your default session, if you want to), and hopefully everything will be working. We're half-way there anyway. All you need to do now, is open the System->Preferences->Sessions->Startup Programs and add the following:
 +
 
 +
    xmodmap /usr/share/xmodmap/xmodmap.us
 +
    gnome-settings-daemon
 +
    beryl-manager
 +
   
 +
Of course, if you are using a different locale, you can substitute xmodmap.us with your appropriate file.
 +
 
 +
* Logout and login again. If everything is running along happily, you'll see the beryl splash screen, and the emerald-like icon of beryl in your tray. If beryl doesn't load initially, just right click the icon, and Select Window Manager->Beryl. Now right click the icon again, and load up Emerald (the window decorator) and choose the theme that you like best. You can also tinker with the settings at your heart's content.
 +
 
 +
Hopefully somebody will find all these useful - I will also update this with more suggested information and tips, to cover more potential problems/configurations.
 +
Any additional suggestions will be more than welcome.
 +
-----------------
 +
 
 +
=== Has anyone got this working on feisty herd 4 ? ===
 +
yes
 +
 
 +
yes: after first reboot
 +
no: since then.
 +
and yes: again then. you need to activate desktop effects in ubuntu. this does the job.
 +
 
 +
=== Feedback (7.04) ===
 +
Newbie: The Part about the Session Manager is unclear and I think my error (the No above) is related to it.
 +
 
 +
Newbie: How can you prove if the installation has been done right to a certain extend? My Problem is, after the first reboot it worked. Then while starting over again it did not.
 +
 
 +
Newbie: How can I remove a compelte Sesssion so I am able to start over again?

Latest revision as of 10:57, 6 October 2012

Xgl/Beryl on Ubuntu/Gnome - the Kombatant Way [updated 6/10/2006][edit]

So here we are, rewriting the whole guide, just because I found out a more bullet-proof way to do it. I've updated it too, and now instead of Compiz it uses Beryl, which imo is much better and has much more potential.

Before we start, I want to make clear that these instructions are targeted for those people using the ATI Proprietary Driver ("fglrx") and having WORKING 3D ACCELERATION. This is configured in your xorg.conf. To make sure you are "accelerated", running with the new driver, try typing fglrxinfo in a terminal and see what you get. If it talks about ATI then awesome... if it talks about Mesa, you still don't have your driver setup properly (xorg.conf). We have an excellent how-to here in the wiki (here: Ubuntu), which works - try it out!

  • If you want the absolute newest stuff, then you're going to have to add some lines to your repositories. So open the /etc/apt/sources.list file as root, and add these lines in order to add the two repositories that are of interest here.
   #Beryl Repositories for Dapper Drake (Ubuntu 6.06)
   deb http://ubuntu.beryl-project.org/ dapper main

or

   #Beryl Repositories for Edgy Eft (Ubuntu 6.10)
   deb http://ubuntu.beryl-project.org/ edgy main
  • To use the Ubuntu Dapper Drake Beryl SVN daily snapshots, add (also) those repositories:
   # Treviño's Beryl-SVN Ubuntu Repository
   # GPG key: 81836EBF
   deb http://3v1n0.tuxfamily.org dapper beryl-svn

or

   # Treviño's Beryl-SVN Ubuntu Edgy Eft Repository
   # GPG key: 81836EBF
   deb http://3v1n0.tuxfamily.org edgy beryl-svn


  • After you add the repos in the sources.list file, issue the following commands:
   wget http://ubuntu.beryl-project.org/root@lupine.me.uk.gpg -O- | sudo apt-key add -
   sudo apt-get update
   sudo apt-get install xserver-xgl libgl1-mesa xserver-xorg libglitz-glx1 beryl emerald-themes
  • If during the apt-get installation you get the error "trying to overwrite `/usr/share/man/man1/Xserver.1x.gz', which is also in package xserver-xorg-core" issue the following two commands to continue:
   sudo dpkg-divert --package xserver-xorg-core --divert /usr/share/man/man1/Xserver.1x.gz.xgl --rename /usr/share/man/man1/Xserver.1x.gz
   sudo apt-get -f install
  • Instead of messing with gdm.conf and gdm.conf-custom, we're going to do something better. From the terminal, issue the command:
   sudo gedit /usr/bin/startxgl.sh

and add these as contents:

   Xgl -fullscreen :1 -ac -accel glx:pbuffer -accel xv:pbuffer & 
   sleep 2 && DISPLAY=:1 exec gnome-session

Save it, and then issue the command:

   sudo chmod 755 /usr/bin/startxgl.sh
  • From the terminal again:
   sudo gedit /usr/share/xsessions/xgl.desktop

and add this as its contents:

   [Desktop Entry]
   Encoding=UTF-8
   Name=XGL
   Exec=/usr/bin/startxgl.sh
   Icon=
   Type=Application
  • So here's the trick. What we've done is to add a new session in GDM. This means that, when GDM loads, you can select the "Xgl" session instead of the normal session you usually use, and it'll load XGL. That way, if something goes horribly wrong, you can simply reboot, and when gdm loads , you will be able to select your normal (and working) session again without editing files all the time.
  • After all that, we are ready. Reboot your machine (yes, reboot) and when GDM loads, look at the sessions; if you see an "XGL" session there, everything's going according to plan. Load it up (make it your default session, if you want to), and hopefully everything will be working. We're half-way there anyway. All you need to do now, is open the System->Preferences->Sessions->Startup Programs and add the following:
   xmodmap /usr/share/xmodmap/xmodmap.us
   gnome-settings-daemon
   beryl-manager
   

Of course, if you are using a different locale, you can substitute xmodmap.us with your appropriate file.

  • Logout and login again. If everything is running along happily, you'll see the beryl splash screen, and the emerald-like icon of beryl in your tray. If beryl doesn't load initially, just right click the icon, and Select Window Manager->Beryl. Now right click the icon again, and load up Emerald (the window decorator) and choose the theme that you like best. You can also tinker with the settings at your heart's content.

Hopefully somebody will find all these useful - I will also update this with more suggested information and tips, to cover more potential problems/configurations. Any additional suggestions will be more than welcome.


Has anyone got this working on feisty herd 4 ?[edit]

yes

yes: after first reboot no: since then. and yes: again then. you need to activate desktop effects in ubuntu. this does the job.

Feedback (7.04)[edit]

Newbie: The Part about the Session Manager is unclear and I think my error (the No above) is related to it.

Newbie: How can you prove if the installation has been done right to a certain extend? My Problem is, after the first reboot it worked. Then while starting over again it did not.

Newbie: How can I remove a compelte Sesssion so I am able to start over again?