cchtml.com - User contributions [en]

Pplib

2012-11-12T17:35:48Z

2.92.5.73:

The --pplib-cmd is an undocumented aticonfig options, appears to directly interface with firmware on card.







The full list of supported commands:

Get version of pplib:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

Get activity information:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16
</code>

Get fanspeed of device #0:
<code>
# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%
</code>

Get clock information of device #0:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;
</code>

Set fanspeed of device #0 to 95% (or try this "set fanspeed 0 auto"):
<code>
# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc dc"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc ac"
PPLIB command execution is Successful!
</code>


In the same manner:
<code>
get swcntl
get pstate
get pmapping AC
get pmapping DC
get pmapping DCLOW
get psbatterylevel AC|DC|DCLOW
get eventCount Thermal
get eventCount VPURecovery
get FanInfo num
get FanSpeed num
get UserState 3d|2d
get activity
get ODParam
get ODLevel num
get ODDefaultLevel
get fs PowerPlay
get fs OverDrive
get fs ReducedRefreshRate
get fs ClockGating
get fs ReducedColorDepth
get fs OverDriveTest
get fs PowerBudgetWaiver
get fs PowerExpress
</code>

<code>
set fs PowerPlay enabled|disabled
set pmapping AC|DC|DCLOW optimalBattery|highBattery|balanced|highPerformanc e|optimalPerformance
set psbatterylevel AC|DC|DCLOW num (num == some number or two. doesn't work here)
set FanSpeed num num
set UserState 2d|3d num num
set ODLevel num,num,num
</code>

<code>
notify psrc dc|ac|dclow
notify batterylevel num
notify suspend
notify resume
notify restState|forcedState|exclusiveMode begin|end
notify DispConfigChange
notify screenSaver|VPURecovery|Thermal|textMode|3dhigh|3d low|inactive|InitCompleted begin|end
notify AppSafeTo|AppUnsafeTo AdapterSwitch|ModeSwitch
notify AdapterDisableSafe
reset fan num
enum thermal num
</code>

== External links ==
[http://phoronix.com/forums/showthread.php?6802-Interesting-undocumented-options&p=19862#post19862 Forum of phoronix.com Interesting undocumented options ]

Pplib

2012-11-12T16:53:44Z

2.92.5.73: /* External links */

The --pplib-cmd is an undocumented aticonfig command, appears to directly interface with firmware on card.







The full list of supported commands:

Get version of pplib:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

Get activity information:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16
</code>

Get fanspeed of device #0:
<code>
# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%
</code>

Get clock information of device #0:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;
</code>

Set fanspeed of device #0 to 95% (or try this "set fanspeed 0 auto"):
<code>
# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc dc"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc ac"
PPLIB command execution is Successful!
</code>


In the same manner:
<code>
get swcntl
get pstate
get pmapping AC
get pmapping DC
get pmapping DCLOW
get psbatterylevel AC|DC|DCLOW
get eventCount Thermal
get eventCount VPURecovery
get FanInfo num
get FanSpeed num
get UserState 3d|2d
get activity
get ODParam
get ODLevel num
get ODDefaultLevel
get fs PowerPlay
get fs OverDrive
get fs ReducedRefreshRate
get fs ClockGating
get fs ReducedColorDepth
get fs OverDriveTest
get fs PowerBudgetWaiver
get fs PowerExpress
</code>

<code>
set fs PowerPlay enabled|disabled
set pmapping AC|DC|DCLOW optimalBattery|highBattery|balanced|highPerformanc e|optimalPerformance
set psbatterylevel AC|DC|DCLOW num (num == some number or two. doesn't work here)
set FanSpeed num num
set UserState 2d|3d num num
set ODLevel num,num,num
</code>

<code>
notify psrc dc|ac|dclow
notify batterylevel num
notify suspend
notify resume
notify restState|forcedState|exclusiveMode begin|end
notify DispConfigChange
notify screenSaver|VPURecovery|Thermal|textMode|3dhigh|3d low|inactive|InitCompleted begin|end
notify AppSafeTo|AppUnsafeTo AdapterSwitch|ModeSwitch
notify AdapterDisableSafe
reset fan num
enum thermal num
</code>

== External links ==
[http://phoronix.com/forums/showthread.php?6802-Interesting-undocumented-options&p=19862#post19862 Forum of phoronix.com Interesting undocumented options ]

Pplib

2012-11-12T16:53:12Z

2.92.5.73: /* External links */

The --pplib-cmd is an undocumented aticonfig command, appears to directly interface with firmware on card.







The full list of supported commands:

Get version of pplib:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

Get activity information:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16
</code>

Get fanspeed of device #0:
<code>
# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%
</code>

Get clock information of device #0:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;
</code>

Set fanspeed of device #0 to 95% (or try this "set fanspeed 0 auto"):
<code>
# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc dc"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc ac"
PPLIB command execution is Successful!
</code>


In the same manner:
<code>
get swcntl
get pstate
get pmapping AC
get pmapping DC
get pmapping DCLOW
get psbatterylevel AC|DC|DCLOW
get eventCount Thermal
get eventCount VPURecovery
get FanInfo num
get FanSpeed num
get UserState 3d|2d
get activity
get ODParam
get ODLevel num
get ODDefaultLevel
get fs PowerPlay
get fs OverDrive
get fs ReducedRefreshRate
get fs ClockGating
get fs ReducedColorDepth
get fs OverDriveTest
get fs PowerBudgetWaiver
get fs PowerExpress
</code>

<code>
set fs PowerPlay enabled|disabled
set pmapping AC|DC|DCLOW optimalBattery|highBattery|balanced|highPerformanc e|optimalPerformance
set psbatterylevel AC|DC|DCLOW num (num == some number or two. doesn't work here)
set FanSpeed num num
set UserState 2d|3d num num
set ODLevel num,num,num
</code>

<code>
notify psrc dc|ac|dclow
notify batterylevel num
notify suspend
notify resume
notify restState|forcedState|exclusiveMode begin|end
notify DispConfigChange
notify screenSaver|VPURecovery|Thermal|textMode|3dhigh|3d low|inactive|InitCompleted begin|end
notify AppSafeTo|AppUnsafeTo AdapterSwitch|ModeSwitch
notify AdapterDisableSafe
reset fan num
enum thermal num
</code>

== External links ==
[phoronix.com/forums/showthread.php?6802-Interesting-undocumented-options&p=19862#post19862 Forum of phoronix.com Interesting undocumented options ]

Pplib

2012-11-12T16:33:12Z

2.92.5.73:

The --pplib-cmd is an undocumented aticonfig command, appears to directly interface with firmware on card.







The full list of supported commands:

Get version of pplib:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

Get activity information:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16
</code>

Get fanspeed of device #0:
<code>
# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%
</code>

Get clock information of device #0:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;
</code>

Set fanspeed of device #0 to 95% (or try this "set fanspeed 0 auto"):
<code>
# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc dc"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc ac"
PPLIB command execution is Successful!
</code>


In the same manner:
<code>
get swcntl
get pstate
get pmapping AC
get pmapping DC
get pmapping DCLOW
get psbatterylevel AC|DC|DCLOW
get eventCount Thermal
get eventCount VPURecovery
get FanInfo num
get FanSpeed num
get UserState 3d|2d
get activity
get ODParam
get ODLevel num
get ODDefaultLevel
get fs PowerPlay
get fs OverDrive
get fs ReducedRefreshRate
get fs ClockGating
get fs ReducedColorDepth
get fs OverDriveTest
get fs PowerBudgetWaiver
get fs PowerExpress
</code>

<code>
set fs PowerPlay enabled|disabled
set pmapping AC|DC|DCLOW optimalBattery|highBattery|balanced|highPerformanc e|optimalPerformance
set psbatterylevel AC|DC|DCLOW num (num == some number or two. doesn't work here)
set FanSpeed num num
set UserState 2d|3d num num
set ODLevel num,num,num
</code>

<code>
notify psrc dc|ac|dclow
notify batterylevel num
notify suspend
notify resume
notify restState|forcedState|exclusiveMode begin|end
notify DispConfigChange
notify screenSaver|VPURecovery|Thermal|textMode|3dhigh|3d low|inactive|InitCompleted begin|end
notify AppSafeTo|AppUnsafeTo AdapterSwitch|ModeSwitch
notify AdapterDisableSafe
reset fan num
enum thermal num
</code>

== External links ==
<a href="http://phoronix.com/forums/showthread.php?6802-Interesting-undocumented-options&p=19862#post19862">
Forum of phoronix.com Interesting undocumented options </a>

Pplib

2012-11-12T15:50:09Z

2.92.5.73:

The --pplib-cmd is an undocumented aticonfig command, appears to directly interface with firmware on card.







The full list of supported commands:

Get version of pplib:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

Get activity information:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16
</code>

Get fanspeed of device #0:
<code>
# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%
</code>

Get clock information of device #0:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;
</code>

Set fanspeed of device #0 to 95%:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc dc"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc ac"
PPLIB command execution is Successful!
</code>


In the same manner:
<code>
get swcntl
get pstate
get pmapping AC
get pmapping DC
get pmapping DCLOW
get psbatterylevel AC|DC|DCLOW
get eventCount Thermal
get eventCount VPURecovery
get FanInfo num
get FanSpeed num
get UserState 3d|2d
get activity
get ODParam
get ODLevel num
get ODDefaultLevel
get fs PowerPlay
get fs OverDrive
get fs ReducedRefreshRate
get fs ClockGating
get fs ReducedColorDepth
get fs OverDriveTest
get fs PowerBudgetWaiver
get fs PowerExpress
</code>

<code>
set fs PowerPlay enabled|disabled
set pmapping AC|DC|DCLOW optimalBattery|highBattery|balanced|highPerformanc e|optimalPerformance
set psbatterylevel AC|DC|DCLOW num (num == some number or two. doesn't work here)
set FanSpeed num num
set UserState 2d|3d num num
set ODLevel num,num,num
</code>

<code>
notify psrc dc|ac|dclow
notify batterylevel num
notify suspend
notify resume
notify restState|forcedState|exclusiveMode begin|end
notify DispConfigChange
notify screenSaver|VPURecovery|Thermal|textMode|3dhigh|3d low|inactive|InitCompleted begin|end
notify AppSafeTo|AppUnsafeTo AdapterSwitch|ModeSwitch
notify AdapterDisableSafe
reset fan num
enum thermal num
</code>

== External links ==
<a href="http://phoronix.com/forums/showthread.php?6802-Interesting-undocumented-options&p=19862#post19862">
Forum of phoronix.com Interesting undocumented options </a>

Pplib

2012-11-12T15:43:13Z

2.92.5.73:

The --pplib-cmd is an undocumented aticonfig command, appears to directly interface with firmware on card.







The full list of supported commands:

Get version of pplib:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

Get activity information:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16
</code>

Get fanspeed of device #0:
<code>
# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%
</code>

Get clock information of device #0:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;
</code>

Set fanspeed of device #0 to 95%:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc dc"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc ac"
PPLIB command execution is Successful!
</code>

In the same manner:
<code>
get version
get clock
get swcntl
get pstate
get pmapping AC
get pmapping DC
get pmapping DCLOW # DCLOW doesn't work here
get psbatterylevel AC|DC|DCLOW
get eventCount Thermal
get eventCount VPURecovery
get temperature num # doesn't work
get FanInfo num # if I enter a number I get zero values back
get FanSpeed num # doesn't work)
get UserState 3d|2d
get activity # doesn't work
get ODParam # doesn't work
get ODLevel num # probably requires number
get ODDefaultLevel # doesn't work
get fs PowerPlay
get fs OverDrive
get fs ReducedRefreshRate
get fs ClockGating
get fs ReducedColorDepth
get fs OverDriveTest
get fs PowerBudgetWaiver
get fs PowerExpress
</code>

<code>
set fs PowerPlay enabled|disabled
set pmapping AC|DC|DCLOW optimalBattery|highBattery|balanced|highPerformanc e|optimalPerformance
set psbatterylevel AC|DC|DCLOW num (num == some number or two. doesn't work here)
set FanSpeed num num # probably expects two numbers, doesn't work
set UserState 2d|3d num num # doesn't work
set ODLevel num,num,num # doesn't work
</code>

<code>
notify psrc dc|ac|dclow
notify batterylevel num
notify suspend
notify resume
notify restState|forcedState|exclusiveMode begin|end
notify DispConfigChange
notify screenSaver|VPURecovery|Thermal|textMode|3dhigh|3d low|inactive|InitCompleted begin|end
notify AppSafeTo|AppUnsafeTo AdapterSwitch|ModeSwitch
notify AdapterDisableSafe
reset fan num
enum thermal num
</code>

Pplib

2012-11-12T15:30:33Z

2.92.5.73:

Pplib

2012-11-12T15:29:52Z

2.92.5.73:

The --pplib-cmd is undocumented aticonfig command, appears to directly interface with firmware on card.







The full list of supported commands:

Get version of pplib:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

Get activity information:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16
</code>

Get fanspeed of device #0:
<code>
# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%
</code>

Get clock information of device #0:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;
</code>

Set fanspeed of device #0 to 95%:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc dc"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc ac"
PPLIB command execution is Successful!
</code>

Pplib

2012-11-12T15:16:04Z

2.92.5.73: comments

The --pplib-cmd is a option of aticonfig utility.







The full list of supported commands:

Get version of pplib:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

Get activity information:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16
</code>

Get fanspeed of device #0:
<code>
# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%
</code>

Get clock information of device #0:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;
</code>

Set fanspeed of device #0 to 95%:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc dc"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc ac"
PPLIB command execution is Successful!
</code>

Pplib

2012-11-12T15:13:29Z

2.92.5.73:

The --pplib-cmd is a option of aticonfig utility.



The full list of supported commands:

Get version of pplib:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

Get activity information:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16
</code>

Get fanspeed of device #0:
<code>
# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%
</code>

Get clock information of device #0:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;
</code>

Set fanspeed of device #0 to 95%:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc dc"
PPLIB command execution is Successful!
</code>

<code>
/usr/bin/aticonfig --pplib-cmd="notify psrc ac"
PPLIB command execution is Successful!
</code>

Pplib

2012-11-12T15:00:42Z

2.92.5.73: /* pplib */

The --pplib-cmd is a option of aticonfig utility.



The full list of supported commands:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

<code>
# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16
</code>

<code>
# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%
</code>

<code>
# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;
</code>

<code>
# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!
</code>

Pplib

2012-11-12T14:58:28Z

2.92.5.73: /* pplib */

== pplib ==

The full list of supported commands:
<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

<code>
# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16
</code>

<code>
# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%
</code>

<code>
# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;
</code>

<code>
# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!
</code>

Pplib

2012-11-12T14:57:29Z

2.92.5.73: /* pplib */

== pplib ==

<code>
# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16

# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%

# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;

# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!

Pplib

2012-11-12T14:57:19Z

2.92.5.73: /* pplib */

Pplib

2012-11-12T14:57:07Z

2.92.5.73: /* pplib */

== pplib ==

<code>
\# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active
</code>

# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16

# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%

# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;

# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!

Pplib

2012-11-12T14:56:55Z

2.92.5.73: /* pplib */

Pplib

2012-11-12T14:56:24Z

2.92.5.73: start

== pplib ==

# /usr/local/bin/aticonfig --pplib-cmd "get version"
PPLIB version is 1.4 and is active

# /usr/local/bin/aticonfig --pplib-cmd "get activity"
Current Activity is Core Clock: 915MHZ
Memory Clock: 1050MHZ
VDDC: 1175
Activity: 98 percent
Performance Level: 2
Bus Speed: 5000
Bus Lanes: 16
Maximum Bus Lanes: 16

# usr/local/bin/aticonfig --pplib-cmd "get fanspeed 0"
Fan speed query:
Query Index: 0, Speed in percent
Result: Fan Speed: 100%

# /usr/local/bin/aticonfig --pplib-cmd "get clock 0"
Engine Clock Range: 300-915 MHZ; Memory Clock Range: 300-1050 MHZ;

# /usr/local/bin/aticonfig --pplib-cmd "set fanspeed 0 95"
PPLIB command execution is Successful!