SUSE/openSUSE

2007-10-25T05:33:52Z

207.248.164.199:

romonbasdron
== General Status ==
* Native Installer Support contributed by Stefan Dirsch
* Repackaged by [http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html Flavio Stanchina]

== Installation ==

===Method 1===
* Install 'kernel-source' and C++ compiler ('gcc') and tools selection in yast.
* Get the rpm that matches the SuSE X server on your system (XFree86 4.3 or X.Org 6.8) instead of the ATI driver installer from [http://www.ati.com]
* init 3
* install the driver package (e.g. rpm -Uvh fglrx64_6_8_0-8.24.8-1.x86_64.rpm)
* configure your X server using fglrxconfig

note: this is not the way described in the READMEs, but it's the way that worked best for me and others. Especially if sax and/or your X server crash when using the ATI driver installer's package (due to missing symbols in fglrx_drv.o)

===GUIDE: ATI Installer HOWTO for SUSE/Novell users===
http://www.suse.de/~sndirsch/ati-installer-HOWTO.html

===ANOTHER Installation Guide (3D Acceleration) ===

"3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)" at

linuxhelp.150m.com/ati/ati.htm<br>
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)

===YET ANOTHER Installation Guide:===

Generally following this guide should help most of you:
http://linux.wordpress.com/2006/05/12/suse-101-ati-drivers-installation/

What follows is a slightly simplified version that I've used numerous times without fail.

1. BACKUP your current /etx/X11/xorg.conf file, preferably to your home directory. Now change to a command shell by hitting Ctrl-Alt-F1.

2. Remove any previous versions of the ATI driver by either

If you have installed a previous ATI driver version without using RPM packages (or if you don't know if you have or not), type the following:

cd /usr/share/ati
sh ./fglrx-uninstall.sh

Otherwise, and even if you've done the above type the following,

rpm -e $(rpm -qa | grep fglrx)

3. Change the directory containing the downloaded ati-driver...run file.

4. Change the permissions of the driver file to executable by typing the following:

chmod +x ./ati-driver...

Use the tab button to complete the rest of the ati-driver... file name.

5. Create a SuSE RPM (info is for 32 bit version) from the file by typing

./ati-driver.(fillintheblanks).run --buildpkg SuSE/SUSE101-IA32

6. Install the created fglrx... file by typing

rpm -ivh fglrx_...(hit tab again to get full name)...

7. The following command will update your library cache, you're recommended to run it:

ldconfig

8. Now run the ati config commands:

aticonfig --initial --input=/etc/X11/xorg.conf

9. Now run the Sax2 setup.

sax2 -r -m 0=fglrx

You may wish to alter the refresh rates and DPI info with this, otherwise just hit save. DO NOT hit the test button, it regually crashes my machine when i do...

10. Reboot you machine. Do not use the reboot command, again this messes my machine up on the next boot for whatever reason... try

shutdown -h now

11. Boot up again, and check the new /etc/X11/xorg.conf file, compare it to your old one, and make any changes if you know what you're doing.

== Resources ==
* [http://www.suse.de/~sndirsch/ati-installer-HOWTO.html Novell HOWTO]
* [http://www.opensuse.org/ATI_Driver_HOWTO OpenSuSE ATI Driver HOWTO]

{{VCT}}

[[Category:Distributions]]

Configuring

2007-10-25T02:38:56Z

207.248.164.199:

celtar
{{VCT-on-top}}
== aticonfig ==

Since version 8.18.6 the fglrx driver includes the '''aticonfig''' tool which simplifies ''xorg.conf'' editing. Here are some useful commands this tool offers (for a complete list see [http://wiki.cchtml.com/index.php/aticonfighelp ''aticonfig --help'']).

=== Changes taking effect on startup ===
''Changes will change the config file!''

;Initial setup (creates device section using fglrx):
:<pre>sudo aticonfig --initial</pre>

;Enable Video acceleration (Xv Overlay):
:<pre>sudo aticonfig --overlay-type=Xv</pre>

;Force fglrx to use kernel's AGP driver instead of own implementation (only use when internal agpgart doesn't work):
:<pre>sudo aticonfig --internal-agp=off</pre>
*Note: Newer fglrx driver versions do not include an internal AGPGART so the kernel agpgart is used no matter what.

=== Changes taking effect immediately ===
''Changes will not change the config file.''

;Print information about power states.
:<pre>aticonfig --list-powerstates</pre>
Or, for us lazy folk, the shorter version is ''aticonfig --lsp''

;Set a power state to the lowest (battery friendly):
:<pre>aticonfig --set-powerstate=1</pre>
*Note: check out available power states using ''aticonfig --list-powerstates''
*Note: this option does not work when an external monitor is connected

;Print information about connected and enabled monitors:
:<pre>aticonfig --query-monitor</pre>

;Examples how to enable two monitors on the fly:
* Assume you have two monitors already setup correctly ([http://ubuntuforums.org/showthread.php?t=301941 Dual monitor support] at Ubuntuforums)
* This example enable laptop internal monitor (lvds) and external monitor (crt1)
:<pre>aticonfig --enable-monitor=lvds,crt1 --effective=now</pre>
*Note: ''aticonfig --enable-monitor=STRING,STRING'' where STRING can be one of the following set, separated by commas: none,crt1,crt2,lvds,tv,tmds1,tmds2,auto. Only 2 displays can be enabled at the same time. Any displays that are not on the list will be disabled.
*Note: check out connected and enabled monitors using ''aticonfig --query-monitor''

;Turn off the second monitor on the fly and start to use only laptop internal monitor (lvds)
:<pre>aticonfig --enable-monitor=lvds --effective=now</pre>

;Swap monitors on the fly when using big desktop mode
* Assume you have two monitors already setup correctly ([http://ubuntuforums.org/showthread.php?t=301941 Dual monitor support] at Ubuntuforums)
:<pre>aticonfig --swap-monitor --effective=now</pre>
* Note: This only works for big desktop setup. This will swap the contents on the two monitors.

=== Troubleshooting ===

Still not working? Go to the [[Troubleshooting]] page.

[[Category:NeedsUpdating]]
{{VCT}}

cchtml.com - User contributions [en]

SUSE/openSUSE

Configuring