<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>http://wiki.cchtml.com/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=219.88.0.0%2F16</id>
	<title>cchtml.com - User contributions [en]</title>
	<link rel="self" type="application/atom+xml" href="http://wiki.cchtml.com/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=219.88.0.0%2F16"/>
	<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Special:Contributions/219.88.0.0/16"/>
	<updated>2026-11-18T19:19:18Z</updated>
	<subtitle>User contributions</subtitle>
	<generator>MediaWiki 1.46.2</generator>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Debian&amp;diff=571</id>
		<title>Debian</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Debian&amp;diff=571"/>
		<updated>2007-02-05T03:52:57Z</updated>

		<summary type="html">&lt;p&gt;219.88.161.254: /* Installation */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;== General Status ==&lt;br /&gt;
* Included with Distribution&lt;br /&gt;
* Native Installer Support contributed by Aric Cyr&lt;br /&gt;
* Repackaged by [http://www.stanchina.net/~flavio/debian-official/fglrx-driver.html Flavio Stanchina]&lt;br /&gt;
&lt;br /&gt;
== Installation ==&lt;br /&gt;
* [[Debian_Installation_Guide|Installation Guide]]&lt;br /&gt;
&lt;br /&gt;
ANOTHER Installation Guide:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;b&amp;gt;&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot;&amp;lt;/b&amp;gt; at&lt;br /&gt;
&lt;br /&gt;
linuxhelp.150m.com/ati/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
Those who run this site do not want you to be able to link to any site other than those controlled by them. &lt;br /&gt;
&lt;br /&gt;
I started a NEW site some days ago and now wish to link to it,...&lt;br /&gt;
&lt;br /&gt;
GUESS WHAT. The newly started site is by default on the Spam protection filter list (that is all sites are on the CENSORED list, until they added to the permitted site list). The Jews seem to be running scared and are censoring everything.&lt;br /&gt;
&lt;br /&gt;
You will have to cut and paste the linuxhelp.150m.com/ati/ati.htm into your browser.&lt;br /&gt;
&lt;br /&gt;
Or, go to linuxhelp.150m.com and click from there.&lt;br /&gt;
&lt;br /&gt;
The broken link that I am trying to replace, was due to the fact that the entire http://linux.coconia.net site was deleted (censored) because I published photos like the following, which show that &lt;br /&gt;
&lt;br /&gt;
BUSH, BLAIR, PUTIN, etc are all JEWS. See for yourself (PHOTOS):&lt;br /&gt;
&lt;br /&gt;
http://chapelhill.indymedia.org/news/2007/01/29307.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://cleveland.indymedia.org/news/2007/01/24276.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://arizona.indymedia.org/news/2007/01/54672.php&lt;br /&gt;
&lt;br /&gt;
(that is, of course, if these sites have not already been censored).&lt;br /&gt;
&lt;br /&gt;
The other link to http://m.domaindlx.com/LinuxHelp/ works sometimes, but seems to mainly not work.&lt;br /&gt;
&lt;br /&gt;
I will start another site to replace m.domaindlx.com/LinuxHelp/.&lt;br /&gt;
&lt;br /&gt;
== Tips and Tricks ==&lt;br /&gt;
* To build your own .deb packages you will need to install at least the following packages from the apt repositories:&lt;br /&gt;
** fakeroot&lt;br /&gt;
** debhelper&lt;br /&gt;
** build-essential&lt;br /&gt;
** make&lt;br /&gt;
** module-assistant&lt;br /&gt;
* [http://debianhelp.co.uk Debian Help]&lt;br /&gt;
* [http://forums.debian.net Debian Forums]&lt;br /&gt;
&lt;br /&gt;
== Related Resources ==&lt;br /&gt;
* [http://www.stanchina.net/~flavio/debian-official/fglrx-driver.html Flavio Stanchina&#039;s ATI Linux driver packages for Debian]&lt;br /&gt;
&lt;br /&gt;
* Debian [http://wiki.debian.org/AtiHowTo wiki] page refering ATI.&lt;br /&gt;
{{VCT}}&lt;br /&gt;
[[Category:Distributions]]&lt;/div&gt;</summary>
		<author><name>219.88.161.254</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=SUSE/openSUSE&amp;diff=531</id>
		<title>SUSE/openSUSE</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=SUSE/openSUSE&amp;diff=531"/>
		<updated>2007-02-05T03:51:37Z</updated>

		<summary type="html">&lt;p&gt;219.88.161.254: /* Installation */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;== General Status ==&lt;br /&gt;
* Native Installer Support contributed by Stefan Dirsch&lt;br /&gt;
* Repackaged by [http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html Flavio Stanchina]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Installation ==&lt;br /&gt;
&lt;br /&gt;
Method 1&lt;br /&gt;
* Install &#039;kernel-source&#039; and C++ compiler (&#039;gcc&#039;) and tools selection in yast.&lt;br /&gt;
* Get the rpm that matches the SuSE X server on your system (XFree86 4.3 or X.Org 6.8) instead of the ATI driver installer from [http://www.ati.com]&lt;br /&gt;
* init 3&lt;br /&gt;
* install the driver package (e.g. rpm -Uvh fglrx64_6_8_0-8.24.8-1.x86_64.rpm)&lt;br /&gt;
* configure your X server using fglrxconfig&lt;br /&gt;
&lt;br /&gt;
note: this is not the way described in the READMEs, but it&#039;s the way that worked best for me and others. Especially if sax and/or your X server crash when using the ATI driver installer&#039;s package (due to missing symbols in fglrx_drv.o)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
ANOTHER Installation Guide: &lt;br /&gt;
&lt;br /&gt;
&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot; at&lt;br /&gt;
&lt;br /&gt;
linuxhelp.150m.com/ati/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
I started a NEW site some days ago and now wish to link to it,...&lt;br /&gt;
&lt;br /&gt;
GUESS WHAT. The newly started site is by default on the Spam protection filter list (that is all sites are on the CENSORED list, until they added to the permitted site list). The Jews seem to be running scared and are censoring everything.&lt;br /&gt;
&lt;br /&gt;
You will have to cut and paste the linuxhelp.150m.com/ati/ati.htm into your browser.&lt;br /&gt;
&lt;br /&gt;
Or, go to linuxhelp.150m.com and click from there.&lt;br /&gt;
&lt;br /&gt;
The broken link that I am trying to replace, was due to the fact that the entire http://linux.coconia.net site was deleted (censored) because I published photos like the following, which show that &lt;br /&gt;
&lt;br /&gt;
BUSH, BLAIR, PUTIN, etc are all JEWS. See for yourself (PHOTOS):&lt;br /&gt;
&lt;br /&gt;
http://chapelhill.indymedia.org/news/2007/01/29307.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://cleveland.indymedia.org/news/2007/01/24276.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://arizona.indymedia.org/news/2007/01/54672.php&lt;br /&gt;
&lt;br /&gt;
(that is, of course, if these sites have not already been censored).&lt;br /&gt;
&lt;br /&gt;
I have fixed the first link.&lt;br /&gt;
&lt;br /&gt;
The http://m.domaindlx.com/LinuxHelp/ link works sometimes, but seems to mainly not work.&lt;br /&gt;
&lt;br /&gt;
I will start another site to replace m.domaindlx.com/LinuxHelp/.&lt;br /&gt;
&lt;br /&gt;
YET ANOTHER Installation Guide:&lt;br /&gt;
&lt;br /&gt;
Generally following this guide should help most of you:&lt;br /&gt;
http://linux.wordpress.com/2006/05/12/suse-101-ati-drivers-installation/&lt;br /&gt;
&lt;br /&gt;
What follows is a slightly simplified version that I&#039;ve used numerous times without fail.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1. BACKUP your current /etx/X11/xorg.conf file, preferably to your home directory. Now change to a command shell by hitting Ctrl-Alt-F1.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
2. Remove any previous versions of the ATI driver by either&lt;br /&gt;
&lt;br /&gt;
If you have installed a previous ATI driver version without using RPM packages (or if you don&#039;t know if you have or not), type the following:&lt;br /&gt;
&lt;br /&gt;
 cd /usr/share/ati &lt;br /&gt;
 sh ./fglrx-uninstall.sh&lt;br /&gt;
&lt;br /&gt;
Otherwise, and even if you&#039;ve done the above type the following,&lt;br /&gt;
&lt;br /&gt;
 rpm -e $(rpm -qa | grep fglrx)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3. Change the the directory containing the downloaded ati-driver...run file.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
4. Change the permissions of the driver file to executable by typing the following:&lt;br /&gt;
&lt;br /&gt;
 chmod +x ./ati-driver...&lt;br /&gt;
&lt;br /&gt;
Use the tab button to complete the rest of the ati-driver... file name.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
5. Create a SuSE RPM (info is for 32 bit version) from the file by typing&lt;br /&gt;
&lt;br /&gt;
 ./ati-driver.(fillintheblanks).run --buildpkg SuSE/SUSE101-IA32&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
6. Install the created fglrx... file by typing&lt;br /&gt;
&lt;br /&gt;
 rpm -ivh fglrx_...(hit tab again to get full name)...&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
7. I&#039;ve no idea what the following does, but you&#039;re recommended to run it:&lt;br /&gt;
&lt;br /&gt;
 ldconfig&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
8. Now run the ati config commands:&lt;br /&gt;
&lt;br /&gt;
 aticonfig --initial --input=etc/X11/xorg.conf&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
9. Now run the Sax2 setup.&lt;br /&gt;
&lt;br /&gt;
 sax2 -r -m 0=fglrx&lt;br /&gt;
&lt;br /&gt;
You may wish to alter the refresh rates and DPI info with this, otherwise just hit save. DO NOT hit the test button, it regually crashes my machine when i do...&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
10. Reboot you machine. Do not use the reboot command, again this messes my machine up on the next boot for whatever reason... try&lt;br /&gt;
&lt;br /&gt;
 shutdown -h now&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
11. Boot up again, and check the new /etc/X11/xorg.conf file, compare it to your old one, and make any changes if you know what you&#039;re doing.&lt;br /&gt;
&lt;br /&gt;
== Resources ==&lt;br /&gt;
* [http://www.suse.de/~sndirsch/ati-installer-HOWTO.html Novell HOWTO]&lt;br /&gt;
* [http://www.opensuse.org/ATI_Driver_HOWTO OpenSuSE ATI Driver HOWTO]&lt;br /&gt;
&lt;br /&gt;
{{VCT}}&lt;br /&gt;
&lt;br /&gt;
[[Category:Distributions]]&lt;/div&gt;</summary>
		<author><name>219.88.161.254</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Installation&amp;diff=2008</id>
		<title>Installation</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Installation&amp;diff=2008"/>
		<updated>2007-02-05T03:50:49Z</updated>

		<summary type="html">&lt;p&gt;219.88.161.254: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;This covers the distribution agnostic way of installing the driver with the Installer.  Ideally you should install using the [[:Category:Distributions|distribution specific]] process for a painless experience.&lt;br /&gt;
&lt;br /&gt;
See the article: &amp;lt;b&amp;gt;&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot;&amp;lt;/b&amp;gt; at&lt;br /&gt;
&lt;br /&gt;
linuxhelp.150m.com/ati/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
Those who run this site do not want you to be able to link to any site other than those controlled by them. &lt;br /&gt;
&lt;br /&gt;
I started a NEW site some days ago and now wish to link to it,...&lt;br /&gt;
&lt;br /&gt;
GUESS WHAT. The newly started site is by default on the Spam protection filter list (that is all sites are on the CENSORED list, until they added to the permitted site list). The Jews seem to be running scared and are censoring everything.&lt;br /&gt;
&lt;br /&gt;
You will have to cut and paste the linuxhelp.150m.com/ati/ati.htm into your browser.&lt;br /&gt;
&lt;br /&gt;
Or, go to linuxhelp.150m.com and click from there.&lt;br /&gt;
&lt;br /&gt;
The broken link that I am trying to replace, was due to the fact that the entire http://linux.coconia.net site was deleted (censored) because I published photos like the following, which show that &lt;br /&gt;
&lt;br /&gt;
BUSH, BLAIR, PUTIN, etc are all JEWS. See for yourself (PHOTOS):&lt;br /&gt;
&lt;br /&gt;
http://chapelhill.indymedia.org/news/2007/01/29307.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://cleveland.indymedia.org/news/2007/01/24276.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://arizona.indymedia.org/news/2007/01/54672.php&lt;br /&gt;
&lt;br /&gt;
(that is, of course, if these sites have not already been censored).&lt;br /&gt;
&lt;br /&gt;
I have fixed the first link.&lt;br /&gt;
&lt;br /&gt;
The http://m.domaindlx.com/LinuxHelp/ link works sometimes, but seems to mainly not work.&lt;br /&gt;
&lt;br /&gt;
I will start another site to replace m.domaindlx.com/LinuxHelp/.&lt;/div&gt;</summary>
		<author><name>219.88.161.254</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Debian&amp;diff=569</id>
		<title>Debian</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Debian&amp;diff=569"/>
		<updated>2007-02-05T03:07:23Z</updated>

		<summary type="html">&lt;p&gt;219.88.170.151: /* Installation */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;== General Status ==&lt;br /&gt;
* Included with Distribution&lt;br /&gt;
* Native Installer Support contributed by Aric Cyr&lt;br /&gt;
* Repackaged by [http://www.stanchina.net/~flavio/debian-official/fglrx-driver.html Flavio Stanchina]&lt;br /&gt;
&lt;br /&gt;
== Installation ==&lt;br /&gt;
* [[Debian_Installation_Guide|Installation Guide]]&lt;br /&gt;
&lt;br /&gt;
ANOTHER Installation Guide:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;b&amp;gt;&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot;&amp;lt;/b&amp;gt; at&lt;br /&gt;
&lt;br /&gt;
linuxhelp.150m.com/ati/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
Those who run this site do not want you to be able to link to any site other than those controlled by them. &lt;br /&gt;
&lt;br /&gt;
I started a NEW site some days ago and now wish to link to it,...&lt;br /&gt;
&lt;br /&gt;
GUESS WHAT. The newly started site is by default on the Spam protection filter list (that is all sites are on the CENSORED list, until they added to the permitted site list). The Jews seem to be running scared and are censoring everything.&lt;br /&gt;
&lt;br /&gt;
You will have to cut and paste the linuxhelp.150m.com/ati/ati.htm into your browser.&lt;br /&gt;
&lt;br /&gt;
Or, go to linuxhelp.150m.com and click from there.&lt;br /&gt;
&lt;br /&gt;
The broken link that I am trying to replace, was due to the fact that the entire http://linux.coconia.net site was deleted (censored) because I published photos like the following, which show that &lt;br /&gt;
&lt;br /&gt;
BUSH, BLAIR, PUTIN, etc are all JEWS. See for yourself (PHOTOS):&lt;br /&gt;
&lt;br /&gt;
http://chapelhill.indymedia.org/news/2007/01/29307.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://cleveland.indymedia.org/news/2007/01/24276.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://arizona.indymedia.org/news/2007/01/54672.php&lt;br /&gt;
&lt;br /&gt;
(that is, of course, if these sites have not already been censored).&lt;br /&gt;
&lt;br /&gt;
The other link to http://m.domaindlx.com/LinuxHelp/ works sometimes, but seems to mainly not work.&lt;br /&gt;
&lt;br /&gt;
I will start another site to replace m.domaindlx.com/LinuxHelp/.&lt;br /&gt;
&lt;br /&gt;
== Tips and Tricks ==&lt;br /&gt;
* To build your own .deb packages you will need to install at least the following packages from the apt repositories:&lt;br /&gt;
** fakeroot&lt;br /&gt;
** debhelper&lt;br /&gt;
** build-essential&lt;br /&gt;
** make&lt;br /&gt;
** module-assistant&lt;br /&gt;
* [http://debianhelp.co.uk Debian Help]&lt;br /&gt;
* [http://forums.debian.net Debian Forums]&lt;br /&gt;
&lt;br /&gt;
== Related Resources ==&lt;br /&gt;
* [http://www.stanchina.net/~flavio/debian-official/fglrx-driver.html Flavio Stanchina&#039;s ATI Linux driver packages for Debian]&lt;br /&gt;
&lt;br /&gt;
* Debian [http://wiki.debian.org/AtiHowTo wiki] page refering ATI.&lt;br /&gt;
{{VCT}}&lt;br /&gt;
[[Category:Distributions]]&lt;/div&gt;</summary>
		<author><name>219.88.170.151</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Installation&amp;diff=2006</id>
		<title>Installation</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Installation&amp;diff=2006"/>
		<updated>2007-02-05T03:00:32Z</updated>

		<summary type="html">&lt;p&gt;219.88.170.151: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;This covers the distribution agnostic way of installing the driver with the Installer.  Ideally you should install using the [[:Category:Distributions|distribution specific]] process for a painless experience.&lt;br /&gt;
&lt;br /&gt;
See the article: &amp;lt;b&amp;gt;&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot;&amp;lt;/b&amp;gt; at&lt;br /&gt;
&lt;br /&gt;
linuxhelp.150m.com/ati/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
Those who run this site do not want you to be able to link to any site other than those controlled by them. &lt;br /&gt;
&lt;br /&gt;
I started a NEW site some days ago and now wish to link to it,...&lt;br /&gt;
&lt;br /&gt;
GUESS WHAT. The newly started site is by default on the Spam protection filter list (that is all sites are on the CENSORED list, until they added to the permitted site list). The Jews seem to be running scared and are censoring everything.&lt;br /&gt;
&lt;br /&gt;
You will have to cut and paste the linuxhelp.150m.com/ati/ati.htm into your browser.&lt;br /&gt;
&lt;br /&gt;
Or, go to linuxhelp.150m.com and click from there.&lt;br /&gt;
&lt;br /&gt;
The broken link that I am trying to replace, was due to the fact that the entire http://linux.coconia.net site was deleted (censored) because I published photos like the following, which show that &lt;br /&gt;
&lt;br /&gt;
BUSH, BLAIR, PUTIN, etc are all JEWS. See for yourself (PHOTOS):&lt;br /&gt;
&lt;br /&gt;
http://chapelhill.indymedia.org/news/2007/01/29307.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://cleveland.indymedia.org/news/2007/01/24276.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://arizona.indymedia.org/news/2007/01/54672.php&lt;br /&gt;
&lt;br /&gt;
(that is, of course, if these sites have not already been censored).&lt;br /&gt;
&lt;br /&gt;
I have fixed the first link.&lt;br /&gt;
&lt;br /&gt;
The http://m.domaindlx.com/LinuxHelp/ link works sometimes, but seems to mainly not work.&lt;br /&gt;
&lt;br /&gt;
I will start another site to replace m.domaindlx.com/LinuxHelp/.&lt;/div&gt;</summary>
		<author><name>219.88.170.151</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=SUSE/openSUSE&amp;diff=529</id>
		<title>SUSE/openSUSE</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=SUSE/openSUSE&amp;diff=529"/>
		<updated>2007-02-05T02:57:38Z</updated>

		<summary type="html">&lt;p&gt;219.88.170.151: /* Installation */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;== General Status ==&lt;br /&gt;
* Native Installer Support contributed by Stefan Dirsch&lt;br /&gt;
* Repackaged by [http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html Flavio Stanchina]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Installation ==&lt;br /&gt;
&lt;br /&gt;
Method 1&lt;br /&gt;
* Install &#039;kernel-source&#039; and C++ compiler (&#039;gcc&#039;) and tools selection in yast.&lt;br /&gt;
* Get the rpm that matches the SuSE X server on your system (XFree86 4.3 or X.Org 6.8) instead of the ATI driver installer from [http://www.ati.com]&lt;br /&gt;
* init 3&lt;br /&gt;
* install the driver package (e.g. rpm -Uvh fglrx64_6_8_0-8.24.8-1.x86_64.rpm)&lt;br /&gt;
* configure your X server using fglrxconfig&lt;br /&gt;
&lt;br /&gt;
note: this is not the way described in the READMEs, but it&#039;s the way that worked best for me and others. Especially if sax and/or your X server crash when using the ATI driver installer&#039;s package (due to missing symbols in fglrx_drv.o)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
ANOTHER Installation Guide: &lt;br /&gt;
&lt;br /&gt;
&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot; at&lt;br /&gt;
&lt;br /&gt;
linuxhelp.150m.com/ati/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
I started a NEW site some days ago and now wish to link to it,...&lt;br /&gt;
&lt;br /&gt;
GUESS WHAT. The newly started site is by default on the Spam protection filter list (that is all sites are on the CENSORED list, until they added to the permitted site list). The Jews seem to be running scared and are censoring everything.&lt;br /&gt;
&lt;br /&gt;
You will have to cut and paste the linuxhelp.150m.com/ati/ati.htm into your browser.&lt;br /&gt;
&lt;br /&gt;
Or, go to linuxhelp.150m.com and click from there.&lt;br /&gt;
&lt;br /&gt;
The broken link that I am trying to replace, was due to the fact that the entire http://linux.coconia.net site was deleted (censored) because I published photos like the following, which show that &lt;br /&gt;
&lt;br /&gt;
BUSH, BLAIR, PUTIN, etc are all JEWS. See for yourself (PHOTOS):&lt;br /&gt;
&lt;br /&gt;
http://chapelhill.indymedia.org/news/2007/01/29307.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://cleveland.indymedia.org/news/2007/01/24276.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://arizona.indymedia.org/news/2007/01/54672.php&lt;br /&gt;
&lt;br /&gt;
(that is, of course, if these sites have not already been censored).&lt;br /&gt;
&lt;br /&gt;
I have fixed the first link.&lt;br /&gt;
&lt;br /&gt;
The http://m.domaindlx.com/LinuxHelp/ link works sometimes, but seems to mainly not work.&lt;br /&gt;
&lt;br /&gt;
I will start another site to replace m.domaindlx.com/LinuxHelp/.&lt;br /&gt;
&lt;br /&gt;
YET ANOTHER Installation Guide:&lt;br /&gt;
&lt;br /&gt;
Generally following this guide should help most of you:&lt;br /&gt;
http://linux.wordpress.com/2006/05/12/suse-101-ati-drivers-installation/&lt;br /&gt;
&lt;br /&gt;
What follows is a slightly simplified version that I&#039;ve used numerous times without fail.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
1. BACKUP your current /etx/X11/xorg.conf file, preferably to your home directory. Now change to a command shell by hitting Ctrl-Alt-F1.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
2. Remove any previous versions of the ATI driver by either&lt;br /&gt;
&lt;br /&gt;
If you have installed a previous ATI driver version without using RPM packages (or if you don&#039;t know if you have or not), type the following:&lt;br /&gt;
&lt;br /&gt;
 cd /usr/share/ati &lt;br /&gt;
 sh ./fglrx-uninstall.sh&lt;br /&gt;
&lt;br /&gt;
Otherwise, and even if you&#039;ve done the above type the following,&lt;br /&gt;
&lt;br /&gt;
 rpm -e $(rpm -qa | grep fglrx)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
3. Change the the directory containing the downloaded ati-driver...run file.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
4. Change the permissions of the driver file to executable by typing the following:&lt;br /&gt;
&lt;br /&gt;
 chmod +x ./ati-driver...&lt;br /&gt;
&lt;br /&gt;
Use the tab button to complete the rest of the ati-driver... file name.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
5. Create a SuSE RPM (info is for 32 bit version) from the file by typing&lt;br /&gt;
&lt;br /&gt;
 ./ati-driver.(fillintheblanks).run --buildpkg SuSE/SUSE101-IA32&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
6. Install the created fglrx... file by typing&lt;br /&gt;
&lt;br /&gt;
 rpm -ivh fglrx_...(hit tab again to get full name)...&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
7. I&#039;ve no idea what the following does, but you&#039;re recommended to run it:&lt;br /&gt;
&lt;br /&gt;
 ldconfig&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
8. Now run the ati config commands:&lt;br /&gt;
&lt;br /&gt;
 aticonfig --initial --input=etc/X11/xorg.conf&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
9. Now run the Sax2 setup.&lt;br /&gt;
&lt;br /&gt;
 sax2 -r -m 0=fglrx&lt;br /&gt;
&lt;br /&gt;
You may wish to alter the refresh rates and DPI info with this, otherwise just hit save. DO NOT hit the test button, it regually crashes my machine when i do...&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
10. Reboot you machine. Do not use the reboot command, again this messes my machine up on the next boot for whatever reason... try&lt;br /&gt;
&lt;br /&gt;
 shutdown -h now&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
11. Boot up again, and check the new /etc/X11/xorg.conf file, compare it to your old one, and make any changes if you know what you&#039;re doing.&lt;br /&gt;
&lt;br /&gt;
== Resources ==&lt;br /&gt;
* [http://www.suse.de/~sndirsch/ati-installer-HOWTO.html Novell HOWTO]&lt;br /&gt;
* [http://www.opensuse.org/ATI_Driver_HOWTO OpenSuSE ATI Driver HOWTO]&lt;br /&gt;
&lt;br /&gt;
{{VCT}}&lt;br /&gt;
&lt;br /&gt;
[[Category:Distributions]]&lt;/div&gt;</summary>
		<author><name>219.88.170.151</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Debian&amp;diff=568</id>
		<title>Debian</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Debian&amp;diff=568"/>
		<updated>2007-02-05T02:53:47Z</updated>

		<summary type="html">&lt;p&gt;219.88.170.151: /* Installation */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;== General Status ==&lt;br /&gt;
* Included with Distribution&lt;br /&gt;
* Native Installer Support contributed by Aric Cyr&lt;br /&gt;
* Repackaged by [http://www.stanchina.net/~flavio/debian-official/fglrx-driver.html Flavio Stanchina]&lt;br /&gt;
&lt;br /&gt;
== Installation ==&lt;br /&gt;
* [[Debian_Installation_Guide|Installation Guide]]&lt;br /&gt;
&lt;br /&gt;
ANOTHER Installation Guide:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;b&amp;gt;&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot;&amp;lt;/b&amp;gt; at&lt;br /&gt;
&lt;br /&gt;
linuxhelp.150m.com/ati/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
The nuts who run this site do not want you to be able to link to any site other than those controlled by them. &lt;br /&gt;
&lt;br /&gt;
I started a NEW site some days ago and now wish to link to it,...&lt;br /&gt;
&lt;br /&gt;
GUESS WHAT. The newly started site is by default on the Spam protection filter list (that is all sites are on the CENSORED list, until they added to the permitted site list). The Jews seem to be running scared and are censoring everything.&lt;br /&gt;
&lt;br /&gt;
You will have to cut and paste the linuxhelp.150m.com/ati/ati.htm into your browser.&lt;br /&gt;
&lt;br /&gt;
Or, go to linuxhelp.150m.com and click from there.&lt;br /&gt;
&lt;br /&gt;
The broken link that I am trying to replace, was due to the fact that the entire http://linux.coconia.net site was deleted (censored) because I published photos like the following, which show that &lt;br /&gt;
&lt;br /&gt;
BUSH, BLAIR, PUTIN, etc are all JEWS. See for yourself (PHOTOS):&lt;br /&gt;
&lt;br /&gt;
http://chapelhill.indymedia.org/news/2007/01/29307.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://cleveland.indymedia.org/news/2007/01/24276.php&amp;lt;br&amp;gt;&lt;br /&gt;
http://arizona.indymedia.org/news/2007/01/54672.php&lt;br /&gt;
&lt;br /&gt;
(that is, of course, if these sites have not already been censored).&lt;br /&gt;
&lt;br /&gt;
I have fixed the first link.&lt;br /&gt;
&lt;br /&gt;
The http://m.domaindlx.com/LinuxHelp/ link works sometimes, but seems to mainly not work.&lt;br /&gt;
&lt;br /&gt;
I will start another site to replace m.domaindlx.com/LinuxHelp/.&lt;br /&gt;
&lt;br /&gt;
== Tips and Tricks ==&lt;br /&gt;
* To build your own .deb packages you will need to install at least the following packages from the apt repositories:&lt;br /&gt;
** fakeroot&lt;br /&gt;
** debhelper&lt;br /&gt;
** build-essential&lt;br /&gt;
** make&lt;br /&gt;
** module-assistant&lt;br /&gt;
* [http://debianhelp.co.uk Debian Help]&lt;br /&gt;
* [http://forums.debian.net Debian Forums]&lt;br /&gt;
&lt;br /&gt;
== Related Resources ==&lt;br /&gt;
* [http://www.stanchina.net/~flavio/debian-official/fglrx-driver.html Flavio Stanchina&#039;s ATI Linux driver packages for Debian]&lt;br /&gt;
&lt;br /&gt;
* Debian [http://wiki.debian.org/AtiHowTo wiki] page refering ATI.&lt;br /&gt;
{{VCT}}&lt;br /&gt;
[[Category:Distributions]]&lt;/div&gt;</summary>
		<author><name>219.88.170.151</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Verifying&amp;diff=2087</id>
		<title>Verifying</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Verifying&amp;diff=2087"/>
		<updated>2006-09-11T10:35:14Z</updated>

		<summary type="html">&lt;p&gt;219.88.93.68: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;It is assumed that you have completed the [[Installing|installation process]].&lt;br /&gt;
&lt;br /&gt;
If the installation has worked, then any 3D application should work without issue.  A simple way to verify without any possibility of failure is to verify the following occurs.  Please note that you may have needed to go through [[:Category:Distributions|distribution specific]] process to enable the 3D support.  &lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
$ fglrxinfo&lt;br /&gt;
display: :0.0  screen: 0&lt;br /&gt;
OpenGL vendor string: ATI Technologies Inc.&lt;br /&gt;
OpenGL renderer string: MOBILITY RADEON 9700 Generic&lt;br /&gt;
OpenGL version string: 2.0.5804 (8.25.0)&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
You can also run the ATI provided application called fgl_glxgears which should show a spinning cube with the venerable glxgears running on each face.&lt;br /&gt;
&lt;br /&gt;
&amp;lt;b&amp;gt;If when you run fgl_glxgears, the cube spins, but is lacking any cogs on the faces, the faces being instead, various shades of blue, and/or you get an error message like:&amp;lt;/b&amp;gt;&lt;br /&gt;
 &lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
Using GLX_SGIX_pbuffer&lt;br /&gt;
913 frames in 5.0 seconds = 182.600 FPS&lt;br /&gt;
783 frames in 5.0 seconds = 156.600 FPS&lt;br /&gt;
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)&lt;br /&gt;
  Major opcode of failed request:  14 (X_GetGeometry)&lt;br /&gt;
  Resource id in failed request:  0x0&lt;br /&gt;
  Serial number of failed request:  51&lt;br /&gt;
  Current serial number in output stream:  51&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
then see one of these pages:&lt;br /&gt;
&lt;br /&gt;
http://linux.coconia.net/general/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
You can now move on to [[Configuring|configuring the driver]].&lt;br /&gt;
&lt;br /&gt;
{{VCT}}&lt;br /&gt;
[[Category:NeedsUpdating]]&lt;/div&gt;</summary>
		<author><name>219.88.93.68</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Verifying&amp;diff=2086</id>
		<title>Verifying</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Verifying&amp;diff=2086"/>
		<updated>2006-09-11T10:31:40Z</updated>

		<summary type="html">&lt;p&gt;219.88.93.68: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;It is assumed that you have completed the [[Installing|installation process]].&lt;br /&gt;
&lt;br /&gt;
If the installation has worked, then any 3D application should work without issue.  A simple way to verify without any possibility of failure is to verify the following occurs.  Please note that you may have needed to go through [[:Category:Distributions|distribution specific]] process to enable the 3D support.  &lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
$ fglrxinfo&lt;br /&gt;
display: :0.0  screen: 0&lt;br /&gt;
OpenGL vendor string: ATI Technologies Inc.&lt;br /&gt;
OpenGL renderer string: MOBILITY RADEON 9700 Generic&lt;br /&gt;
OpenGL version string: 2.0.5804 (8.25.0)&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
You can also run the ATI provided application called fgl_glxgears which should show a spinning cube with the venerable glxgears running on each face.&lt;br /&gt;
&lt;br /&gt;
&amp;lt;b&amp;gt;If when you run fgl_glxgears, but is lacking any cogs on the faces, the faces being instead, various shades of blue, and/or you get an error message like:&amp;lt;/b&amp;gt;&lt;br /&gt;
 &lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
Using GLX_SGIX_pbuffer&lt;br /&gt;
913 frames in 5.0 seconds = 182.600 FPS&lt;br /&gt;
783 frames in 5.0 seconds = 156.600 FPS&lt;br /&gt;
X Error of failed request:  BadDrawable (invalid Pixmap or Window parameter)&lt;br /&gt;
  Major opcode of failed request:  14 (X_GetGeometry)&lt;br /&gt;
  Resource id in failed request:  0x0&lt;br /&gt;
  Serial number of failed request:  51&lt;br /&gt;
  Current serial number in output stream:  51&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
then see one of these pages:&lt;br /&gt;
&lt;br /&gt;
http://linux.coconia.net/general/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
You can now move on to [[Configuring|configuring the driver]].&lt;br /&gt;
&lt;br /&gt;
{{VCT}}&lt;br /&gt;
[[Category:NeedsUpdating]]&lt;/div&gt;</summary>
		<author><name>219.88.93.68</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Mandriva&amp;diff=488</id>
		<title>Mandriva</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Mandriva&amp;diff=488"/>
		<updated>2006-09-09T03:24:38Z</updated>

		<summary type="html">&lt;p&gt;219.88.217.149: /* Installation with ATI installer */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;ATI drivers are included in commercial release. Following instructions concern installation on the free release.&lt;br /&gt;
&lt;br /&gt;
== Installation with ATI installer ==&lt;br /&gt;
&lt;br /&gt;
First of all, you have to install kernel sources :&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
$ su&lt;br /&gt;
# urpmi kernel-source&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Then, download ati installer and launch it :&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
# chmod +x ati-driver-installer-X.X.X.run&lt;br /&gt;
# ./ati-driver-installer-X.X.X.run&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Follow the instructions.&lt;br /&gt;
&lt;br /&gt;
&amp;lt;HR&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;b&amp;gt;Slightly more information to be found here: &amp;lt;/b&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot; at&lt;br /&gt;
&lt;br /&gt;
http://linux.coconia.net/general/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
== Installation with Mandriva 2006 PLF Packages ==&lt;br /&gt;
&lt;br /&gt;
Note: Thats are not Official Mandriva fglrx RPMS, it works perfekt on my machine.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
First you must add PLF non-free repository. Use [http://easyurpmi.zarb.org easyurpmi] for example.&lt;br /&gt;
&lt;br /&gt;
Then, install the driver with this command.&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
# urpmi ati-xorg dkms-ati&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
You can now choose fglrx driver for your card with the Mandriva drakx11 tool&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
# drakx11&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Configuration ==&lt;br /&gt;
&lt;br /&gt;
Use &#039;&#039;&#039;aticonfig&#039;&#039;&#039;. Consult help with &#039;&#039;&#039;aticonfig -h&#039;&#039;&#039;.&lt;br /&gt;
&lt;br /&gt;
Reboot.&lt;br /&gt;
&lt;br /&gt;
{{VCT}}&lt;br /&gt;
&lt;br /&gt;
[[Category:Distributions]]&lt;/div&gt;</summary>
		<author><name>219.88.217.149</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=SUSE/openSUSE&amp;diff=527</id>
		<title>SUSE/openSUSE</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=SUSE/openSUSE&amp;diff=527"/>
		<updated>2006-09-09T03:22:08Z</updated>

		<summary type="html">&lt;p&gt;219.88.217.149: /* Installation */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;== General Status ==&lt;br /&gt;
* Native Installer Support contributed by Stefan Dirsch&lt;br /&gt;
* Repackaged by [http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html Flavio Stanchina]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Installation ==&lt;br /&gt;
&lt;br /&gt;
Method 1&lt;br /&gt;
* Install &#039;kernel-source&#039; and C++ compiler (&#039;gcc&#039;) and tools selection in yast.&lt;br /&gt;
* Get the rpm that matches the SuSE X server on your system (XFree86 4.3 or X.Org 6.8) instead of the ATI driver installer from [http://www.ati.com]&lt;br /&gt;
* init 3&lt;br /&gt;
* install the driver package (e.g. rpm -Uvh fglrx64_6_8_0-8.24.8-1.x86_64.rpm)&lt;br /&gt;
* configure your X server using fglrxconfig&lt;br /&gt;
&lt;br /&gt;
note: this is not the way described in the READMEs, but it&#039;s the way that worked best for me and others. Especially if sax and/or your X server crash when using the ATI driver installer&#039;s package (due to missing symbols in fglrx_drv.o)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
ANOTHER Installation Guide: &lt;br /&gt;
&lt;br /&gt;
&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot; at&lt;br /&gt;
&lt;br /&gt;
http://linux.coconia.net/general/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
== Resources ==&lt;br /&gt;
* [http://www.suse.de/~sndirsch/ati-installer-HOWTO.html Novell HOWTO]&lt;br /&gt;
* [http://www.opensuse.org/ATI_Driver_HOWTO OpenSuSE ATI Driver HOWTO]&lt;br /&gt;
&lt;br /&gt;
{{VCT}}&lt;br /&gt;
&lt;br /&gt;
[[Category:Distributions]]&lt;/div&gt;</summary>
		<author><name>219.88.217.149</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Debian&amp;diff=566</id>
		<title>Debian</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Debian&amp;diff=566"/>
		<updated>2006-09-06T10:55:10Z</updated>

		<summary type="html">&lt;p&gt;219.88.88.64: /* Installation */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;== General Status ==&lt;br /&gt;
* Included with Distribution&lt;br /&gt;
* Native Installer Support contributed by Aric Cyr&lt;br /&gt;
* Repackaged by [http://www.stanchina.net/~flavio/debian-official/fglrx-driver.html Flavio Stanchina]&lt;br /&gt;
&lt;br /&gt;
== Installation ==&lt;br /&gt;
* [[Debian_Installation_Guide|Installation Guide]]&lt;br /&gt;
&lt;br /&gt;
ANOTHER Installation Guide:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;b&amp;gt;&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot;&amp;lt;/b&amp;gt; at&lt;br /&gt;
&lt;br /&gt;
http://linux.coconia.net/general/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
== Tips and Tricks ==&lt;br /&gt;
* To build your own .deb packages you will need to install at least the following packages from the apt repositories:&lt;br /&gt;
** fakeroot&lt;br /&gt;
** debhelper&lt;br /&gt;
** build-essential&lt;br /&gt;
** make&lt;br /&gt;
** module-assistant&lt;br /&gt;
* [http://debianhelp.co.uk Debian Help]&lt;br /&gt;
* [http://forums.debian.net Debian Forums]&lt;br /&gt;
&lt;br /&gt;
== Related Resources ==&lt;br /&gt;
* [http://www.stanchina.net/~flavio/debian-official/fglrx-driver.html Flavio Stanchina&#039;s ATI Linux driver packages for Debian]&lt;br /&gt;
&lt;br /&gt;
{{VCT}}&lt;br /&gt;
[[Category:Distributions]]&lt;/div&gt;</summary>
		<author><name>219.88.88.64</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=8.28.8&amp;diff=3239</id>
		<title>8.28.8</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=8.28.8&amp;diff=3239"/>
		<updated>2006-09-06T10:52:29Z</updated>

		<summary type="html">&lt;p&gt;219.88.88.64: /* Universal installer */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;[[Category:NeedsUpdating]]&lt;br /&gt;
&lt;br /&gt;
[https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run 32-bit and 64-bit Unified Installer]&lt;br /&gt;
&lt;br /&gt;
==New Features==&lt;br /&gt;
===New Product Support===&lt;br /&gt;
This release of the ATI Proprietary Linux driver introduces support for the following ATI products:&lt;br /&gt;
&lt;br /&gt;
* Radeon® Xpress 1200&lt;br /&gt;
* Radeon® Xpress 1250&lt;br /&gt;
* Radeon® Xpress 1300&lt;br /&gt;
&lt;br /&gt;
===Universal installer===&lt;br /&gt;
&lt;br /&gt;
This release of the ATI Proprietary Linux driver now provides a unified driver installer for the 32bit and 64bit Linux platforms. This intelligent installer will identify which CPU architecture (IA32, and x86_64) is being used and install the appropriate driver.&lt;br /&gt;
&lt;br /&gt;
See the article: &amp;lt;b&amp;gt;&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot;&amp;lt;/b&amp;gt; at&lt;br /&gt;
&lt;br /&gt;
http://linux.coconia.net/general/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;br /&gt;
&lt;br /&gt;
for how to use the 8.28.8 intelligent installer.&lt;br /&gt;
&lt;br /&gt;
===Display Switching Support for IBM/Lenovo Thinkpad Products===&lt;br /&gt;
&lt;br /&gt;
This release of the ATI Proprietary Linux driver provides Display Switching support for IBM/Lenovo Thinkpad products containing a supported ATI Radeon® Mobility™ product. This feature allows users to use the hotkey function Fn+F7 to toggle between display devices connected to the laptop.&lt;br /&gt;
&lt;br /&gt;
===ATI Pairmode Support===&lt;br /&gt;
&lt;br /&gt;
This release of the ATI Proprietary Linux driver introduces a new feature called Pairmode. This feature allows users to enable BigDesktop mode with two different screen resolutions. When using Xrandr, users can now dynamically switch between BigDesktop and Clone mode without having to restart the X Server.&lt;br /&gt;
&lt;br /&gt;
===Retaining Display Device State Between Restarts===&lt;br /&gt;
&lt;br /&gt;
This release of the ATI Proprietary Linux driver now maintains the display device status between restarts. Previously, when using multiple display devices, the ATI Proprietary Linux drivers enabled all displays connected to the display adapter even if the display devices were disabled by aticonfig or Display Switching.&lt;br /&gt;
&lt;br /&gt;
==Resolved Issues==&lt;br /&gt;
&lt;br /&gt;
* Connecting a Dell Widescreen UltraSharp 2405FPW to the DVI port of any supported ATI product installed in a system running the X Server no longer results in the display failing to provide an image. &lt;br /&gt;
&lt;br /&gt;
==Known Issues==&lt;br /&gt;
&lt;br /&gt;
* Attempting to install the ATI Proprietary Linux driver on distributions that have updated certain 3D components outside of the stock XOrg 6.8.2 may result in the driver not initializing 3D applications properly. Further details can be found in topic number 737-20868&lt;br /&gt;
* A system hang may occur when attempting to resume from hibernation mode. Further details can be found in topic number 737-22059&lt;br /&gt;
* Loading the XVideo Extension on 64-bit Xorg 6.9+ systems causes the X Server to segfault on launch with ATI Radeon X1K products. Further details and the workaround can be found in topic number 737-22837&lt;br /&gt;
* Users with X Server X.org 7.1 can not play any video using XV. The ATI AVIVO Video adaptor is not present. Further details and the workaround can be found in topic number 737-22852 &lt;br /&gt;
&lt;br /&gt;
[[Category:Releases]]&lt;/div&gt;</summary>
		<author><name>219.88.88.64</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Installation&amp;diff=2005</id>
		<title>Installation</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Installation&amp;diff=2005"/>
		<updated>2006-09-06T10:49:25Z</updated>

		<summary type="html">&lt;p&gt;219.88.88.64: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;This covers the distribution agnostic way of installing the driver with the Installer.  Ideally you should install using the [[:Category:Distributions|distribution specific]] process for a painless experience.&lt;br /&gt;
&lt;br /&gt;
[[Category:NeedsUpdating]]&lt;br /&gt;
&lt;br /&gt;
See the article: &amp;lt;b&amp;gt;&amp;quot;3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)&amp;quot;&amp;lt;/b&amp;gt; at&lt;br /&gt;
&lt;br /&gt;
http://linux.coconia.net/general/ati.htm&amp;lt;br&amp;gt;&lt;br /&gt;
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)&lt;/div&gt;</summary>
		<author><name>219.88.88.64</name></author>
	</entry>
</feed>