Category:Distributions

2007-10-04T17:32:01Z

65.44.66.100:

domace
The list of GNU/Linux flavors that are documented for the ATI Linux driver.

Although ATI can only actively support a small number of distributions, distribution vendors are encouraged to work with ATI to ensure that native packages can be created for their distribution. The current actively supported distributions are the '''Redhat Enterprise Linux''' and '''Novell/SuSE''' suite of products.

Also note that the End User License Agreement explicitly provides for repackaging and redistribution of ATI's drivers. If your favourite distribution is not listed below, please work with them to contact ATI and either get support in the installer, or natively in the distribution.

cchtml.com:About

2007-10-04T17:31:22Z

65.44.66.100:

oueltr
chierdro
cchtml.com wiki - An interface to document tips, tricks and problems related to ATI's proprietary Linux drivers.

cchtml.com:About

2007-10-04T10:19:50Z

65.44.66.100:

chierdro
cchtml.com wiki - An interface to document tips, tricks and problems related to ATI's proprietary Linux drivers.

Category:NeedsUpdating

2007-10-04T10:19:47Z

65.44.66.100:

ricpascnalil
botrlitaelt
Here is your opportunity to support this site. Any of the linked pages below need updating. Please update and remove the NeedsUpdating flag.

Category:Releases

2007-10-04T10:19:42Z

65.44.66.100:

vargetracch
ATI's typical release cycle is one month, give or take a few extra days. A release may include new features or only bug fixes. Support for a particular kernel version may or may not be included by the time a driver is released depending on when the release days occur.
<br />
<br />
To see a particular release, click on the link below.

Category:OEMs

2007-10-04T10:18:33Z

65.44.66.100:

pasrel
Beige box manufacturers will typically use stock cards purchased through retail channels only.

This list should contain branded boards (motherboards, AIB cards and systems).

Branded systems will typically invest a lot more effort into ensuring components are compatible and stable. As a result, listing branded systems allows users to understand the breadth of support provided by ATI's drivers.

Please select a hardware manufacturer from the list below.

[[Category:NeedsUpdating]]

Troubleshooting

2007-10-04T10:18:29Z

65.44.66.100:

c4tacrololo
monrela
==Kernel Related Issues==

=== No 3D acceleration ===
If you see output that looks like this:

$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.1)

Make sure you do not have Xinerama enabled in your xorg.conf! 3D-acceleration is not supported by fglrx in Xinerama mode.

Then try these two commands:

sudo mkdir -p /usr/X11R6/lib/modules/dri
sudo ln -s /usr/lib/dri/fglrx_dri.so /usr/X11R6/lib/modules/dri
Source<ref>http://www.thinkwiki.org/wiki/Problems_with_fglrx#Perpetual_Mesa_GLX_Indirect_on_Debian</ref>

Or you can try deleting all files from the /lib/modules/$(uname -r)/volatile folder and relinking:

<code>
sudo rm /lib/modules/$(uname -r)/volatile/*<br>
sudo ln -s /lib/modules/$(uname -r)/misc/fglrx.ko /lib/modules/$(uname -r)/volatile/fglrx.ko
</code><br>

If that doesn't work confirm fglrx is loaded:

lsmod | grep fglrx

If it returns nothing then try this:

sudo depmod -ae
sudo echo fglrx >> /etc/modules
(If this returns "bash: /etc/modules: Permission denied" then sudo su first.)

If it doesn't still work, open up /etc/modprobe.d/lrm-video with an editor, and uncomment any line(s) that contains fglrx in it.

In case nothing above works, open /etc/modprobe.d/blacklist-restricted with an editor and comment any line that might contain fglrx word in it.

=== nForce 3 AGP Issues ===

For nForce3 based motherboards: if the install seems to go well, but fglrx still fails and $ fglrxinfo tells you you're still running Mesa, there may be a problem with the nVidia AGP-PCI Bridge module's compatibility with your BIOS (or vice versa, I haven't yet investigated). (Confirmed at least for ASUS K8N-E Deluxe.) A solution is to downgrade your BIOS to a previous version (see your motherboard manual/manufacturer's website for instructions). Here is a list of compatible BIOS versions (if your model is not listed here and you find a version that fixes the problem, please add it to the list so others can benefit):

(Update: March 22nd, 2007) It appears that the beta ASUS bios 1012 will also fix the problem. I had the ATI drivers installed but fglrxinfo was still reporting Mesa as the OpenGL provider. I flashed the BIOS to 1012, rebooted into Ubuntu. Problem solved.

*ASUS
**K8N-E Deluxe: Version 1006
**K8N-E Deluxe: Version 1012 beta
**K8N Bios versions up 1003 to 1011, my Solution -> K8V-X (Asus with Via-Chipset) It is working really good now. (Always Problems: nForce3 Chipset)

*ASROCK
**K8Upgrade-NF3
(A little workaround for K8Upgrade-NF3 is to edit xorg.conf, in section "Devices", adding this line: Option "UseInternalAGPGART" "no")

=== AGP Initialization fails with amd_k7_agp module ===
With Kernel 2.6.16.x, there came a new feature called "EDAC" which creates a conflict causing amd_k7_agp not to work. This results in a
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP
Message in the error-log.

To resolve the problem, in your kernel config change
CONFIG_EDAC_AMD76X=y
to
#CONFIG_EDAC_AMD76X is not set
(just comment it out)
recompile/reinstall/reboot your kernel. Everything should work now.

==X Server Related Issues==

=== No XVideo support on 690G integrated graphic chipset ===
*Upgrade your BIOS if you get random flicker lines and black screen with a 690G chip.
*Motherboard using the 690G IGP chipset don't have XVideo support. When you execute the "xvinfo" command you get "no adaptors present". This is the case by using the 8.39.4 FGLRX driver and whenever the "sudo aticonfig --overlay-type=Xv" command or the "sudo aticonfig --overlay-type=opengl" was used. ATI seem to know this as there list TVtime as an application unable to run on a 690G chip.

=== System lockup on logout or switch to virtual consoles ===

If your system locks up after you logout or when you try to switch to a virtual console, this might be an instance of [http://ati.cchtml.com/show_bug.cgi?id=330 this bug]. It is likely that the problem only occurs for users with an '''Xorg version of at least 7.0'''. Probably it only affects users of '''DVI'''.

There is a workaround: Use a standard D-Sub VGA connector instead of the DVI connector.

This workaround was posted as a comment to another related bug: see [http://ati.cchtml.com/show_bug.cgi?id=239#c48 here].

=== BigDesktop doesn't work after GDM login screen ===

This can occur on Ubuntu Feisty Fawn sometimes.

System > Prefrences > Screen Resolution

Select the resolution that is a combination of both screen resolutions wide and your height.

=== Computer Freezes while using fglrx (UMA and SIDEPORT) ===
If after choosing fglrx as your driver in either xorg.conf or xfree86.conf files, the computer freezes and becomes unresponsive while trying to start X this may be the solution.

Some ATI cards have the ability to run in three modes: UMA, SIDEPORT, or a combination of both. UMA mode is that one in which the video card does not use its dedicated memory, but rather uses and shares the system memory. On the other hand, SIDEPORT mode is the one in which the card uses its own dedicated memory. And finally, the third mode is a combination of the previous modes in which the card uses both the system memory and its dedicated memory.

If your computer hangs, this settings may be where the solution lies. If your computer hangs, try using either UMA by itself or a combination of both. However, if you choose the combination, make sure that the UMA one is at least 128MB. In my case, I have SIDEPORT 128MB and 128MB UMA. If I choose any less for UMA, it does not work. This is definetly not an attractive solution since it compromises your systems performance. Hopefully, this will be solved very soon.

On some systems, the BIOS screen may not offer a choice of UMA or SIDEPORT. In this case, you can try turning the amount of RAM dedicated to the video card down, from 128Mb to 64Mb for example.

=== Graphical Anomalies ===

This was experienced with an ATI Radeon X1600 Pro 512mb:

After following instructions for both Method 1 and Method 2, whenever the Composite Extension is disabled, the display would be almost unusable, but the fglrxinfo command would display the correct information. If the Composite Extension is re-enabled the display would be usable, but fglrxinfo would report using mesa drivers.

To resolve the problem it maybe needed to lower the AGP Aperture setting in my BIOS to 128mb (or lower worked too). The AGP Aperture was initially set to 256mb. After setting the AGP Aperture to 128mb, everything worked perfectly; the Composite Extension is disabled, fglrxinfo reports the correct drivers, and direct rendering is enabled. Some systems may require setting the AGP Aperture to the highest setting (256mb or 512mb).

=== Blank Screen with Xorg 1.3.0 ===
If you happen to get a blank screen on X startup and you find lines similar to those in your Xorg.log:
{{Box File|/var/log/Xorg.log|
<nowiki>
2: /usr/lib64/xorg/modules/drivers//fglrx_drv.so(swlDalHelperValidateModeFromDAL 0x549) [...]
3: /usr/lib64/xorg/modules/drivers//fglrx_drv.so [...]
4: /usr/lib64/xorg/modules/drivers//fglrx_drv.so(atiddxPreInit 0x8b3) [...]
</nowiki>
}}

Then you're probably using the ati-drivers with Xorg-1.3.0. If that's the case the only solution (known to me) is to use a version < 1.3.0.

=== X800/X850 fan is very loud / constantly works ===

It seems fglrx has a bug with all X800/X850 cards causing them to heat up excessively
even when not in 3D mode. This behaviour will cause the cards' fans to function on full
blast continuously. There is no known fix as of driver 8.31.05 or previous. Open source
"radeon" driver does not exhibit this problem.

=== System freezes after logout with GDM or KDM<ref>http://ati.cchtml.com/show_bug.cgi?id=239 Going back to gdm/kdm hardlocks after running X session</ref> ===

If you use GDM, which is the default Login Manager on Ubuntu, modify
<pre>sudo gedit /etc/gdm/gdm.conf</pre>

{{Box File|/etc/gdm/gdm.conf|
<nowiki>AlwaysRestartServer=true</nowiki>
}}

If you use KDM, which is the default Login Manager on Kubuntu, add to the [X-:*-Core] section the following

<pre>sudo kate /etc/kde3/kdm/kdmrc</pre>

{{Box File|/etc/kde3/kdm/kdmrc|
<nowiki>TerminateServer=true</nowiki>
}}

==References==
<references/>

[[Category:Installation Documentation]]

[[Category:NeedsUpdating]]
{{VCT}}

cchtml.com - User contributions [en]

Category:Distributions

cchtml.com:About

cchtml.com:About

Category:NeedsUpdating

Category:Releases

Category:OEMs

Troubleshooting