Ubuntu Precise Installation Guide

2012-12-10T09:24:39Z

67.205.6.227: SpPztuQZqwUGUgW

The islands of Greece offer myaird tourist attractions that appeal the travelers from across the planet, especially during summers. Rhodes being one of the most popular tourist attractions of Greece welcomes its visitors with lusty and sexy beaches, beaches that are of international repute. The summer sun and the golden sand of these beaches work as a nice blend of natural beauties and work as a magnet for the travel-freaks. Top beaches in Rhodes are although stay crowded throughout the year. Most of the Rhodes beach hotels stay full booked during June and October. Rhodes offers a wide assortment of spellbinding beaches. The sandy coastline is appealing enough for those who love to play in the sun with the abundant sea kissing their feet every now and then. These beaches of Rhodes are studded with bars, taverns and hotels so accommodation comes easy for Rhodes visitors. Water sports are also largely played on these beaches. Some of the top Rhodes beaches are as follows. The Kalathos Beach is located 50 kilometers south-west from Rhodes city central. The beach in daytime looks mesmerizingly golden and the crystalline sea water splashes on the lusty beach with enough valor and thrust. You can take bamboo umbrellas and wooden sun beds for rent. The Kallithea BeachThe Kallithea is considered as one of the top beaches in Rhodes which is located 10 kilometers south-east from the city of Rhodes. Hot springs are the prime points of attraction for the visitors of this beach. With pine and palm trees rowed around the coastline and the golden sand rightly contrasted by the bluish green colored water have been attracting minds since centuries. The beach is undoubtedly one of the Faliraki Beach is located to the north-east of the city of Rhodes. The beach is just a few kilometers away from the city central and the coastline of the beach is bejeweled with elegantly golden sand and greenish blue seawater. The water is absolutely crystallite so you can take a easy look through. The 4 kilometer spanned wide beach is studded with some of the best restaurants, pubs and bars of Rhodes and provides ample opportunities for both water sports and beach sports lovers.The Monolithos beach is known for its serenity and tranquility. Those who have enjoyed life to the fullest and want to spend a few peaceful days in this blessed city of Rhodes, can easily head towards Rhodes straight away from the Diagoras as it's not so far from the international airfield. The beach has a distinctive look with the white sand reflecting the sunrays and in night, turning to an enchanted slice of land. It's also attributed with a swarm of Rhodes beach hotelsFor more detail about Rhodes greece visit :

Ubuntu Feisty Installation Guide

2012-03-28T08:03:20Z

67.205.49.128: /* Enable "restricted" Repository */

The [[:Category:Releases|latest]] fglrx driver supports Radeon 9500 and the X-series cards up to HD2900. Workstation cards are not supported.

==Pre-Installation Checks==
===Video Card Support===
{| border="1" cellspacing="0" cellpadding="3"
!|Card Class
!|Supported (8.42.3)
!|Supported (7.12)
|-
|Radeon Consumer Cards 9500 to 9800
|Yes
|
|-
|Radeon Consumer Cards X300 to X1950
|Yes
|
|-
|Radeon Consumer Cards HD 2400 to HD 2900
|Yes
|
|-
|FireGL Workstation Cards
|No
|Yes
|}

Sarah / I'm trying to use this theme for a cleint and it's generating this error: Warning: call_user_func_array() [function.call-user-func-array]: First argument is expected to be a valid callback, mytheme_add_admin' was given in /home1/webdcmar/public_html/wp-includes/plugin.php on line 395Can you please double-check this and email me if you've corrected for the problem? The old version of Handgloves isn't even upload-able anymore. Just generates a string of errors. Thanks!

=== Disable Composite Extension ===
In Ubuntu Feisty the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to disable Composite you have to edit the ''xorg.conf'' file:
<pre>gksu gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:

{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "Disable"
EndSection

Section "ServerFlags"
Option "AIGLX" "off"
EndSection</pre>
}}

*Note: Xubuntu does not have gedit. The default text editor in Xubuntu is called mousepad.
<pre>gksu mousepad /etc/X11/xorg.conf</pre>
*Note: Kubuntu does not have gedit. The default text editor in Kubuntu is called Kate.
<pre>kdesudo kate /etc/X11/xorg.conf</pre>
Another option is to use nano directly from the terminal.
<pre>sudo nano /etc/X11/xorg.conf</pre>

== Installation ==

===Method 1: Install the Driver the Ubuntu Way===
<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-generic restricted-manager
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
</pre>

Note: The second line of the above may not be necessary. If apt says it cannot find the "linux-restricted-modules" package, try line 3. If that fails, check your sources.list (see top of page)

If the system complains about dependencies, use your preferred package manager to download python2.4 and, if necessary, its dependencies.

===Method 2: Install the 8.42.3 Driver Manually===

*Note: ''This is just an alternative installation method for the section above. It might help if you still get 'DRI missing' errors.''

Download the ATI driver installer:
[http://www2.ati.com/drivers/linux/ati-driver-installer-8.42.3-x86.x86_64.run ati-driver-installer-8.42.3-x86.x86_64.run] (this installer is for 32bit '''and''' 64bit systems)

'''Alternatively:''' You can get the newest driver from here: [http://ati.amd.com/support/drivers/linux/linux-radeon.html].

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

There is a detailed manual with screenshots at [https://wiki.ubuntu.com/AddingRepositoriesHowto Ubuntu Wiki].

By default, Ubuntu does not enable the Universe and Multiverse repositories. But they include some important programs and codecs, so it is highly recommended to activate them.

''Install necessary tools:''
<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential fakeroot dh-make debhelper \
debconf libstdc++5 linux-headers-generic
</pre>

''Create .deb packages:''
<pre>
sudo chmod u+x ati-driver-installer-<version>.run
# e.g. sudo chmod u+x ./ati-driver-installer-8-8-x86.x86_64.run
sudo ./ati-driver-installer-<version>.run --buildpkg Ubuntu/<release>
# e.g. sudo ./ati-driver-installer-8-8-x86.x86_64.run --buildpkg Ubuntu/hardy
</pre>

''Blacklist old fglrx module from linux-restricted-modules:''

*Note: You only need to do this if you've installed the driver from Method 2 above.

As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.28.8), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

Ubuntu/Gnome users type in:
<pre>gksu gedit /etc/default/linux-restricted-modules-common</pre>

Kubuntu/KDE users type in:
<pre>kdesudo kate /etc/default/linux-restricted-modules-common</pre>

Add "fglrx" to the line "DISABLED_MODULES"
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.42.3-1*.deb \
fglrx-kernel-source_8.42.3-1*.deb \
fglrx-amdcccle_8.42.3-1*.deb
</pre>

*Note: If you have a 64 bit install, the above dpkg command will likely complain that "Errors were encountered while processing: fglrx-amdcccle". This is because of a dependency of the amdccle package on 32 bit libraries. If you recieve this error, issue the following command after the above dpkg command, which will force the installation of all of the 32 bit dependencies, and then the amdccle package:

<pre>
sudo apt-get install -f
</pre>

''Remove any old fglrx debs from /usr/src/:''
<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Fix broken dependencies''
*Note: ''You only need to do this if you have installed previous versions of these drivers using this method before.''
<pre>
sudo apt-get -f install
</pre>

''Compile the kernel module:''
*Note: ''Since Catalyst 7.12, this step is not needed anymore, because the fglrx-kernel-source package compiles and installs the module.''
<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

It's necessary, because sometimes this file is written by other packages, and so there's no 3D acceleration.

''Create the following folder''

<pre>
sudo mkdir /lib/modules/$(uname -r)/volatile
</pre>

''Create a symbolic link''

<pre>
sudo ln -s /lib/modules/$(uname -r)/misc/fglrx.ko /lib/modules/$(uname -r)/volatile/fglrx.ko
</pre>

'''IMPORTANT''': You have to recompile the kernel module after each kernel update!

===Configure the Driver===
*Note Method 2 Users: Before you carry out this step you must reboot your machine. Or else the fglrx driver will not be in use on xorg.conf and using the aticonfig options will cause a memory dump and not intialise the Driver properly.
*Note: An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc. Another alternative is '''aticonfig --initial --force''' if you encounter issues with the first command.
<pre>
sudo aticonfig --initial
</pre>
Then:
<pre>
sudo aticonfig --overlay-type=Xv
</pre>
*Note: Is there an alternative to the previous step?

===Finish the Installation===
Now save any open document and reboot your system:
<pre>
sudo shutdown -r now
</pre>
*Note: An '''alternative''' to rebooting is to restart the X Server by pressing your CTRL ALT BACKSPACE keys. You must remove any old kernel modules such as "drm" "radeon" or "fglrx" using the "rmmod" command. Example: <code>sudo rmmod fglrx</code>

== Post-Installation Checks ==
===Verifying===
Run the following command to check its output to ensure the fglrx driver is installed properly:
<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI MOBILITY RADEON 9600/9700 Series
OpenGL version string: 2.0.6650 (8.40.4)
</pre>
The <code>OpenGL vendor string</code> should read '''ATI''' and not '''Mesa'''.

If you see a message like 'Xlib: extension "XFree86-DRI" missing on display ":1.0"' then you may have to add the following to /etc/X11/xorg.conf (see [http://ubuntuforums.org/showthread.php?t=292642#post1714920]):
{{Box File|/etc/X11/xorg.conf|
<pre>
Section "Extensions"
Option "Composite" "Disable"
EndSection
</pre>
}}

=== Additional configure with aticonfig tool ===
You can even more configure the driver with the '''aticonfig''' tool, more information can be found at [[Configuring]].

For example: <br>
* use powerplay option to switch power state for battery friendly or performance mode
* use dual head or one big desktop mode
* turn second monitor on/off on the fly

==Ubuntu-specific Issues==

Tocuhdwon! That's a really cool way of putting it!

=== If suspend is not working ===

If suspend stops working after fglrx installation, meaning display will not initialize after attempting to resume, then changing a few options has been reported to work for some hardware. 

For ATI X700 and ATI X1100 on Acer Aspire 5051:
{{Box File|/etc/default/acpi-support|
<pre>
SAVE_VBE_STATE=false
POST_VIDEO=true
USE_DPMS=false
</pre>
}}

For ATI X1300 and the ATI X1400 on a Dell Inspiron 9400 or Lenovo Thinkpad T60, also for ATI X1600 on Asus Z96J (using install method 2):
{{Box File|/etc/default/acpi-support|
<pre>
POST_VIDEO=false
</pre>
}}

==See Also==
*[[Frequently Asked Questions]]
*[[Performance Issues]]
*[[Troubleshooting]]
*[http://www.petitiononline.com/x200MLin/petition.html Petition for better ATI/AMD Radeon XPRESS 200M Linux Drivers]
* [http://ubuntuforums.org/showpost.php?p=2221323

[[Category:Installation Documentation]]

Debian Installation Guide

2012-02-28T10:56:34Z

67.205.45.170: LbRCYzNVMziNs

Hi, this is a conemmt.To delete a conemmt, just log in and view the post's conemmts. There you will have the option to edit or delete them.

Catalyst 10.8

2011-12-20T08:32:39Z

67.205.2.72: EOnAVeIaKCcnc

I can't believe you're not plyniag with me--that was so helpful.

User talk:Dtl131

2011-08-22T12:29:31Z

67.205.2.187: Undo revision 6932 by 165.139.190.15 (talk)

Shoot, so that's that one supopses.

cchtml.com - User contributions [en]

Ubuntu Precise Installation Guide

Ubuntu Feisty Installation Guide

Debian Installation Guide

Catalyst 10.8

User talk:Dtl131