cchtml.com - User contributions [en]

Ubuntu Jaunty Installation Guide

2011-07-13T02:17:36Z

82.233.60.101: /* Issues */

__TOC__

{| WIDTH="650" cellpadding=0 cellspacing=0 style="background-color: red; border: solid 1px #666666; color: #ffffff; text-align: center;"
| style="background-color: #666666; border: solid 1px #666666; border-bottom: 1px solid #888;" | '''ATTENTION UBUNTU JAUNTY USERS'''
|-
| Warning: Does not work for all system combinations at this time 
|}

= The Options =
Users with ATI cards basically have these options:
# '''Standard Open Source Drivers''' These are stable and nice, but currently have poor 3D performance, if any. If you have a Radeon X1k product or earlier, this is your only option.
# '''Edge Open Source Drivers''' These drivers have improved 3D performance
# '''The Ubuntu Way''' Use the restricted-driver management system that comes with Ubuntu to install the proprietary drivers.
# '''Third (Fourth?) Party Installer''' Use envy/jockey or other installer helper.
# '''Install the drivers manually''' Using the installer downloaded from AMD's site via either package based install or direct install.

= Open Source Drivers =
By default, Ubuntu will already try to use one of the open source drivers for your hardware. If the feature set and stability work for you, then you don't need to change anything.

The drivers that may be used are
* '''vesa''' Lowest common denominator across all graphics vendor, not many features.
* '''ati''' Actually a facade that will invoke the radeon driver.
* '''radeon''' Driver support all radeon classes of hardware - with limited 3D for newer cards.
* '''radeonhd''' An alternate driver support R520 hardware and later.

By default there is no configuration file for X anymore, so X will try to do the right thing.

If you run into stability problems with 3D applications using the radeon/radeonhd drivers, consider trying a more recent kernel.
[http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.29.3/ mainline-2.6.29.3] did the trick on a few machines.

There's an ongoing debate about how and if the radeon and radeonhd drivers will be used in the future. For more information, see http://wiki.x.org/wiki/RadeonFeature

= Installing Open Source Edge Drivers =

These drivers are built regularly from the X.Org git repository. So sometimes they work, sometimes they don't. However, they have been stable for me, and are the only drivers that work for me. The fglrx drivers hang my system, and the standard "radeon" driver does not support a 2560x1600 resolution.

To install:

First add the repository https://launchpad.net/~tormodvolden/+archive/ppa. Instructions on how to do that are on that page. Then update your packages using Update Manager, and then add the ''xserver-xorg-video-radeonhd'' package. When you log in, you may be using the new driver, but you will probably still be using the radeon driver. To switch to the radeonhd driver, add this to '''/etc/X11/xorg.conf''' :

<pre>Section "Device"
Identifier "Default Device"
Driver "radeonhd"
EndSection</pre>

= The Ubuntu way to install the Proprietary Drivers =

== Restricted Drivers Manager ==
* Ubuntu 9.04 (Jaunty) provides a notification saying that there are restricted drivers available
* Go to the Restricted Drivers Manager and enable the "ATI accelerated graphics driver"
* Ubuntu will then install and configure the driver for you

Note that you will be restricted to the drivers for you version of Ubuntu that Canonical deem as stable. This may not give you the latest drivers, but should be safest. The driver installed this way does not work with Radeon X1300.

= Installing the drivers manually =
*PLEASE READ FIRST!
This portion of the guide works, since I have used it myself. I guess the rest of the guide is broken or it may be because the new driver doesn't support any of the older ATI cards anymore.

'''Which cards does ATI no longer support?'''
The ATI Radeon 9500-9800, X300-X2100, Xpress. See the complete list [http://wiki.cchtml.com/index.php/9.4 here.]
If your card is on that list, you are restricted to the 9.3 driver - however since 9.3 driver doesn't support xorg-xserver 1.6, it will not work with Jaunty! This guide currently is for installing 9.10. !!!SO BE CAREFUL!!!

_______________________________________________

I recommend using copy and paste. However, you can Ctrl + C in your browser but you cannot Ctrl + V in the terminal. When you have copied something simply use Ctrl + Shift + V or Shift + Insert to paste into the terminal or go to the terminals menu, select edit and click paste. This method will ensure there are no typing mistakes and will greatly speed up the install process.

''If you are using the x86_64 architecture (64 bit), be sure to install "ia32-libs" before proceeding!''

Make sure ''universe'' and ''multiverse'' are enabled in your repository sources.

===''Before you start''===
Install the necessary programs
{{Box Terminal|
sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++5 dkms libQtGui4
}}
NB in 9.10 (Karmic Koala) libstdc++5 has been superseded by libstdc++6. In some cases, libstdc++5 is still needed; however there is a workaround to this by symlinking libstdc++5 to libstdc++6.

The workaround is as follows:
{{Box Terminal|
sudo ln -s /usr/lib/libstdc++.so.6 /usr/lib/libstdc++.so.5
}}
Then run ldconfig.

{{Box Terminal|
sudo ldconfig
}}

===''1. Download the latest Catalyst package.''===

Download page: Catalyst {{catalystversion}} -- File: {{catalystfilename}}. This package contains both the 32-bit and 64-bit driver.

Open a terminal window and switch to the directory you downloaded the installer to. (Example: $ cd Desktop)

Make sure your directory path does not contain spaces

(Errors may be experienced during the creation of the *.deb files for manual install for version 9.12. If so try 9.11 as I tested it myself and had no errors)

===''2. Create .deb packages.''===
{{Box Terminal|
sh {{Template:Catalystfilename}} --buildpkg Ubuntu/jaunty
}}
''note that if you are following these instructions for karmic to replace Ubuntu/jaunty with Ubuntu/karmic''

===''3. Just in case''===
Write down or remember this series of Alt+PrntScr key combinations, just in case your screen should go black and Ctrl+Alt+F1 and Ctrl+Alt+Backspace doesn't work.

Alt+PrntScr+r, Alt+PrntScr+s, Alt+PrntScr+e, Alt+PrntScr+i, Alt+PrntScr+n, Alt+PrntScr+u, Alt+PrntScr+b

These keypresses will reboot the system safely. To remember the keypresses, remember this nonsensical phrase: "Raising Skinny Elephants Is Never Utterly Boring".

An alternative would be to hold down Ctrl+Alt+SysRq (SysRq is usually the same key as PrintScreen) and type very slowly R E I S U B. A way to remember this is by inverting the word: "BUSIER" or remebering a phrase: "Restart Even If System Utterly Broken". This would also safely shutdown the system.

===''4. Install .debs.''===

Install the debs, depending on if you're on a 32-bit or 64-bit system:

* For 32-bit systems

{{Box Terminal|
sudo dpkg -i xorg-driver-fglrx_*.deb fglrx-kernel-source_*.deb fglrx-amdcccle_*.deb
}}

(This may fail due to a missing dkms. If so install this first. Also check the version numbers (8.632) against the created debs)

* For 64-bit systems

{{Box Terminal|
sudo dpkg -i xorg-driver-fglrx_*.deb fglrx-kernel-source_*.deb fglrx-amdcccle_*.deb
}}
''Using [http://en.wikipedia.org/wiki/Command_line_completion tab completion] can make this command easier.''

=== ''5. Additional 64-bit instructions'' ===

--If you have installed the "ia32-libs" package most likely you will not need to do this step.--

If you have a 64 bit install, the above dpkg command may complain that "Errors were encountered while processing: fglrx-amdcccle". This is because of a dependency of the amdccle package on 32 bit libraries. If you receive this error, issue the following command after the above dpkg command, which will force the installation of all of the 32 bit dependencies, and then the amdcccle package:

{{Box Terminal|
sudo apt-get -f install
}}

Catalyst {{Template:Catalystversion}} on 64-bit systems requires the ''--force-overwrite'' command in the above ''dpkg'' command:
{{Box Terminal|
sudo dpkg -i --force-overwrite xorg-driver-fglrx_*.deb fglrx-kernel-source_*.deb fglrx-amdcccle_*.deb fglrx-modaliases_*.deb libamdxvba1_*.deb
}}
''Using [http://en.wikipedia.org/wiki/Command_line_completion tab completion] can make this command easier.''

== Finishing the Install: Configuration ==

===''Now you'll have to edit your xorg.conf''===

'''Note: If you've used fglrx previously, skip down to step 6.'''

For Ubuntu:
{{Box Terminal|
sudo gedit /etc/X11/xorg.conf
}}

For Kubuntu:
{{Box Terminal|
sudo kate /etc/X11/xorg.conf
}}

and add the following line to the Device section (if it does not already exist). Include the following lines without '''[...]''':
<pre>Section "Device"
[...]
Identifier "SOME IDENTIFIER"
[...]
Driver "fglrx"
[...]
EndSection</pre>

===''6. Generate a new /etc/Xorg.conf file''===

Unfortunately there is no sure way to generate the ATI version of the Xorg.conf file. It is entirely dependent on your configuration. The following subsections will attempt to address possible (and tested) variations for their respective configurations.

==== Generic Config ====
This will work for most people:
{{Box Terminal|
sudo aticonfig --initial -f
}}

==== X2 Cards ====
If you have an X2 card (e.g. 4870X2), use... !!Do not use for two separate cards in crossfire!!
{{Box Terminal|
sudo aticonfig --initial -f --adapter<nowiki>=</nowiki>all
}}

==== Dual/Multi Monitors ====
If you have a dual monitor display (also known as "Big Desktop"), use:
{{Box Terminal|
sudo aticonfig --initial -f --set-pcs-str<nowiki>=</nowiki>"DDX,EnableRandR12,FALSE"
}}
This was confirmed in http://phoronix.com/forums/showthread.php?t=18553.

===''7. Force use of /etc/Xorg.conf file''===
Some people find that changes to xorg.conf don't get used by the driver. To force the ati driver to adopt changes made to xorg.conf, type the following command:

{{Box Terminal|
sudo aticonfig <nowiki>--input=/etc/X11/xorg.conf --tls=1</nowiki>
}}

===''8. Test your installation''===
Finally, reboot the computer and type
{{Box Terminal|
fglrxinfo
}}
into the terminal. If the vendor string contains ATI, you have installed the driver successfully. Release 9.6 looks like:
<pre>
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Radeon HD 4800 Series (This line may be different depending on what graphics card you are using.)
OpenGL version string: 2.1.8673
</pre>

* Please note: Depending on the particular ATI card that you own, you may or may not automatically have all of the relevant driver features enabled. R500 and R600 cards (X1xxx, HD series, and newer) in particular will need TexturedVideo enabled in Xorg.conf (rather than the traditional VideoOverlay) in order to support Xv accelerated video playback.
* Also note: if you don't reboot, fglrxinfo gives an error message - this threw me for a bit as I didn't read the line above the box very carefully.

=HOW TO UPDATE DRIVER=

To update your driver to a new version (say 9.5 to 9.6) first disable the current driver through Ubuntu's Hardware Manager or use EnvyNG to remove the driver, then go to synaptic and search for "xorg-driver-fglrx" without the quotes and mark it for "Complete removal" and hit "Apply" then reboot your computer. Now simply repeat steps #1, 2, 4 and finally run these commends in a terminal: {{Box Terminal|
sudo aticonfig --initial -f
}}
in a terminal. If it doesn't give an error you should be good.

If you have an X2 card (e.g. 4870X2), use... !!Do not use for two separate cards in crossfire!!
{{Box Terminal|
sudo aticonfig --initial -f --adapter<nowiki>=</nowiki>all
}}
instead in a terminal to generate the /etc/Xorg.conf file.

and

{{Box Terminal|
sudo aticonfig <nowiki>--input=/etc/X11/xorg.conf --tls=1</nowiki>
}}

then reboot.

It is very important that you COMPLETELY remove the old driver which includes the config files because when upgrading without uninstalling the old driver I noticed even though the new driver installed and worked there were some annoying problems that I experienced but after I completely uninstalled the old driver then installed the new one, it worked perfectly.

=HOW TO REMOVE DRIVER=

To completely remove the driver disable the current driver through Ubuntu's Hardware Manager or use EnvyNG to remove the driver, then go to synaptic and search for "xorg-driver-fglrx" without the quotes and mark it for "Complete removal" and hit "Apply" then reboot your computer.

Alternatively, use the following command from the terminal.

{{Box Terminal|
sudo apt-get remove --purge xorg-driver-fglrx
}}

=Tweaks=
# Add tweaks as needed: http://ubuntuforums.org/showthread.php?t=849422
# Restart X, if it doesn't work, you can use the "vesa", "ati", "radeon" or "radeonhd" driver in the mean time, until you make it work.
# If you downgraded X to make fglrx work: enter synaptic, make sure all packages with "xorg" and "x11" are locked so that you can update and upgrade without worries.

Done! Now run amdcccle, glxgears, nexuiz, warsow etc :)

This is way more helfupl than anything else Ive looked at.

Suspend2

2005-12-16T13:58:47Z

82.233.111.47: /* Good working: */

==Suspend2 with fglrx 8.19==

Suspend2 version 2.2-rc11 and the ati driver version 8.19.10 is the first combination which is supposed to work without any support tool like vbetool. Suspend2 is the next generation of software suspension tool that has more advanced configuration options and scripting possibilities which makes it more usable for hardwares that need workaround and work not with Suspend's original version.

Suspend1 is included in vanilla kernel, but Suspend2 is a patchset for specific kernel versions, and a package of hibernation script and scriplets (that do the suspend and resume process along with the kernel). You need to go to [http://www.suspend2.net suspend2.net] to download the patchset and patch the related kernel source, compile it and the fglrx kernel driver. Go there for more info about the suspend2 installing. If you want to use rc11 you will need kernel 2.6.14. Former versions of Suspend2 are not using well the new fglrx driver 8.19.10, so it is advisable to use suspend2 2.2-rc11. Older versions are said to be working with older versions of ati driver but it's likely you will need a working vbetool to use them.

The recent versions were tested by a bunch of users and reported to be fully usable. [http://rage3d.com/board/showthread.php?t=33834557 rage3d forum thread]. It hibernates and resumes fglrx very well. You should have a perfectly restored X screen when you resume your machine. Hunt for bugs and flaws is still running and any discoveries should be described on this page and the [http://ati.cchtml.com/ bugzilla].

The new '''suspend2 2.2-rc13''' has many new fixes (though filewriter still needs caution, but swapwriter works fine), and if you want to use it with ati-driver, please be aware that you might need to add the following line to your hibernate.conf to make it work:

ProcSetting extra_pages_allowance 5000

==Suspend2 experience==

====Bugs:====

* Samsung P35, using Ubuntu Breezy with kernel 2.6.14.2 and suspend2-2.2-rc11,fglrx 8.19.10 -- the screen isn't "redrawn"

* Abit NF7, Radeon 9600XT, 1G RAM, gentoo linux (kernel 2.6.14-suspend2-r1 with suspend 2.2-rc11), fglrx 8.19.10 - hangs if two instances of X are resumend and switching to another X.

(Resuming a freezed proxy service (ziproxy or tinyproxy) caused kernel locking. Be careful to stop them before suspending. -- 2.2-rc11)

====Good working:====

* Abit NF7, Radeon 9600XT, 1G RAM, gentoo linux (kernel 2.6.14-suspend2-r1 with suspend 2.2-rc13/rc11), fglrx 8.19.10

- XV not working after resume

* AMD Athlon(tm) XP 2600+, nForce 2,
1Go RAM, Radeon 9200SE - FC4 suspend 2.2-rc11 (or latest 2.2-rc13) using FC4 kernel from http://mhensler.de/swsusp/
and livna ATI RPM!

- XV and 3D acceleration is still present after suspend! (XV is ok since fglrx-8.20.8)

Suspend2

2005-11-30T20:41:27Z

82.233.111.47: /* Good working: */

==Suspend2 with fglrx 8.19==

Suspend2 version 2.2-rc11 and the ati driver version 8.19.10 is the first combination which is supposed to work without any support tool like vbetool. Suspend2 is the next generation of software suspension tool that has more advanced configuration options and scripting possibilities which makes it more usable for hardwares that need workaround and work not with Suspend's original version.

Suspend1 is included in vanilla kernel, but Suspend2 is a patchset for specific kernel versions, and a package of hibernation script and scriplets (that do the suspend and resume process along with the kernel). You need to go to [http://www.suspend2.net suspend2.net] to download the patchset and patch the related kernel source, compile it and the fglrx kernel driver. Go there for more info about the suspend2 installing. If you want to use rc11 you will need kernel 2.6.14. Former versions of Suspend2 are not using well the new fglrx driver 8.19.10, so it is advisable to use suspend2 2.2-rc11. Older versions are said to be working with older versions of ati driver but it's likely you will need a working vbetool to use them.

The recent versions were tested by a bunch of users and reported to be fully usable. [http://rage3d.com/board/showthread.php?t=33834557 rage3d forum thread]. It hibernates and resumes fglrx very well. You should have a perfectly restored X screen when you resume your machine. Hunt for bugs and flaws is still running and any discoveries should be described on this page and the [http://ati.cchtml.com/ bugzilla].

The new '''suspend2 2.2-rc13''' has many new fixes (though filewriter still needs caution, but swapwriter works fine), and if you want to use it with ati-driver, please be aware that you might need to add the following line to your hibernate.conf to make it work:

ProcSetting extra_pages_allowance 5000

==Suspend2 experience==

====Bugs:====

* Samsung P35, using Ubuntu Breezy with kernel 2.6.14.2 and suspend2-2.2-rc11,fglrx 8.19.10 -- the screen isn't "redrawn"

* Abit NF7, Radeon 9600XT, 1G RAM, gentoo linux (kernel 2.6.14-suspend2-r1 with suspend 2.2-rc11), fglrx 8.19.10 - hangs if two instances of X are resumend and switching to another X.

(Resuming a freezed proxy service (ziproxy or tinyproxy) caused kernel locking. Be careful to stop them before suspending. -- 2.2-rc11)

====Good working:====

* Abit NF7, Radeon 9600XT, 1G RAM, gentoo linux (kernel 2.6.14-suspend2-r1 with suspend 2.2-rc13/rc11), fglrx 8.19.10

- XV not working after resume

* AMD Athlon(tm) XP 2600+, nForce 2,
1Go RAM, Radeon 9200SE - FC4 suspend 2.2-rc11 (or latest 2.2-rc13) using FC4 kernel from http://mhensler.de/swsusp/
and livna ATI RPM!

- 3D acceleration is still present after suspend! (Good!)

- XV doesn't work anymore after suspend (bad...) => black screen in XV region

Suspend2

2005-11-16T21:54:21Z

82.233.111.47: /* Suspend2 experience */

==Suspend2 with fglrx 8.19==

Suspend2 version 2.2-rc11 and the ati driver version 8.19.10 is the first combination which is supposed to work without any support tool like vbetool. Suspend2 is the next generation of software suspension tool that has more advanced configuration options and scripting possibilities which makes it more usable for hardwares that need workaround and work not with Suspend's original version.

Suspend1 is included in vanilla kernel, but Suspend2 is a patchset for specific kernel versions, and a package of hibernation script and scriplets (that do the suspend and resume process along with the kernel). You need to go to [http://www.suspend2.net suspend2.net] to download the patchset and patch the related kernel source, compile it and the fglrx kernel driver. Go there for more info about the suspend2 installing. If you want to use rc11 you will need kernel 2.6.14. Former versions of Suspend2 are not using well the new fglrx driver 8.19.10, so it is advisable to use suspend2 2.2-rc11. Older versions are said to be working with older versions of ati driver but it's likely you will need a working vbetool to use them.

The recent versions were tested by a bunch of users and reported to be fully usable. [http://rage3d.com/board/showthread.php?t=33834557 rage3d forum thread]. It hibernates and resumes fglrx very well. You should have a perfectly restored X screen when you resume your machine. Hunt for bugs and flaws is still running and any discoveries should be described on this page and the [http://ati.cchtml.com/ bugzilla].

==Suspend2 experience==

'''Bugs:'''

Samsung P35, using Ubuntu Breezy with kernel 2.6.14.2 and suspend2-2.2-rc11,fglrx 8.19.10 -- the screen isn't "redrawn"

'''Good working:'''

Abit NF7, Radeon 9600XT, 1G RAM, gentoo linux (kernel 2.6.14-suspend2-r1 with suspend 2.2-rc11), fglrx 8.19.10

AMD Athlon(tm) XP 2600+, nForce 2,
1Go RAM, Radeon 9200SE - FC4 suspend 2.2-rc11 using FC4 kernel from http://mhensler.de/swsusp/
and livna ATI RPM!
- 3D acceleration is still present after suspend! (Good!)
- XV doesn't work anymore after suspend (bad...) => black screen in XV region

Suspend2

2005-11-16T21:52:52Z

82.233.111.47: /* Suspend2 experience */

==Suspend2 with fglrx 8.19==

Suspend2 version 2.2-rc11 and the ati driver version 8.19.10 is the first combination which is supposed to work without any support tool like vbetool. Suspend2 is the next generation of software suspension tool that has more advanced configuration options and scripting possibilities which makes it more usable for hardwares that need workaround and work not with Suspend's original version.

Suspend1 is included in vanilla kernel, but Suspend2 is a patchset for specific kernel versions, and a package of hibernation script and scriplets (that do the suspend and resume process along with the kernel). You need to go to [http://www.suspend2.net suspend2.net] to download the patchset and patch the related kernel source, compile it and the fglrx kernel driver. Go there for more info about the suspend2 installing. If you want to use rc11 you will need kernel 2.6.14. Former versions of Suspend2 are not using well the new fglrx driver 8.19.10, so it is advisable to use suspend2 2.2-rc11. Older versions are said to be working with older versions of ati driver but it's likely you will need a working vbetool to use them.

The recent versions were tested by a bunch of users and reported to be fully usable. [http://rage3d.com/board/showthread.php?t=33834557 rage3d forum thread]. It hibernates and resumes fglrx very well. You should have a perfectly restored X screen when you resume your machine. Hunt for bugs and flaws is still running and any discoveries should be described on this page and the [http://ati.cchtml.com/ bugzilla].

==Suspend2 experience==

'''Bugs:'''

Samsung P35, using Ubuntu Breezy with kernel 2.6.14.2 and suspend2-2.2-rc11,fglrx 8.19.10 -- the screen isn't "redrawn"

'''Good working:'''

Abit NF7, Radeon 9600XT, 1G RAM, gentoo linux (kernel 2.6.14-suspend2-r1 with suspend 2.2-rc11), fglrx 8.19.10

AMD Athlon(tm) XP 2600+, nForce 2,
1Go RAM, Radeon 9200SE - FC4 suspend 2.2-rc11 using FC4 kernel from http://mhensler.de/swsusp/
and livna ATI RPM!
- 3D acceleration is still present after suspend! (Good!)
- XV doesn't work anymore after suspend (bad...) => black screen is the XV region