cchtml.com - User contributions [en]

Ubuntu Dapper Installation Guide

2006-11-22T19:57:32Z

84.160.203.249: revert to 15:07, 22 November 2006

'''NOTE:''' This guide is '''only''' for Ubuntu 6.06 (Dapper)! Guides for other versions of Ubuntu can be found at the [[Ubuntu]] page.

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.
== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 
== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

The name of package change with 64 bits : example : sudo dpkg -i fglrx-control_8.29.6-1_amd64.deb

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to remove any old fglrx debs and recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled then you may have to ensure '''fglrx_dri.so''' is where it should be. Try to symblink the '''dri''' folder if you get no direct rendering:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

With recent fglrx, the <tt>make.sh</tt> in <tt>/usr/src/fglrx.tar.bz2</tt> (installed by the fglrx-kernel-source package) is not executable. You may need the following in order to make module-assistant happy:
<pre>
mkdir /tmp/scratch
pushd /tmp/scratch
tar xjf /usr/src/fglrx.tar.bz2
chmod +x modules/fglrx/make.sh
sudo tar cjf /usr/src/fglrx.tar.bz2 modules
popd
</pre>

If installing over a custom-built kernel (for example 2.6.18), the procedure above may need to be modified slightly, especially if you didn't use <tt>make-kpkg</tt> to install your kernel:
<pre>
# sudo module-assistant prepare # no ubuntu package for 2.6.18
sudo module-assistant update
sudo module-assistant build -k path/to/my/kernel/sources fglrx
sudo module-assistant install -k path/to/my/kernel/sources fglrx
sudo depmod -a
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: You may also having to rebuild your module dependency by using "depmod -a".

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 / nw8440 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ https://support.ati.com/]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/ http://www.rhthm.com/ati/]]. ''''

** sep-30-2006, mde wrote: Installed the 8.24 driver (hp dv8000 / dv8120ca w/ 200m) and it all works. I recommend this solution! Don't try to force the later drivers to work unless you're some sort of sadist :). (Had to set to Sideport+UMA 128MB)

* sep-12-2006, tekNico wrote: on an HP dv5008EA with the 200M adapter, DRI works with the 8.24.8 driver, and setting the BIOS to Sideport+UMA to 128MB video memory. The 8.28.8 breaks some on-screen widgets.

* Sep-27-2006: HP Pavilion dv8000 (Radeon Xpress 200M). Turned off Sideport and installed the driver from the repositories, ver 8.25.18. The computer started up fine, but was extremely unstable and crashed in about 5 minutes of work. Same thing with driver ver 8.29.6. At the end I installed ver 8.24.8 and that seemed to work well.

* Oct-17-2006: webbertiger wrote: on my HP Pavilion dv8309us with Radeon Xpress 200M and AMD64 cpu, the driver (ati-driver-installer-8.29.6.run) downloaded from [ATI website[https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/64bit/ati-driver-installer-8.29.6.run]] works fine. I also manually added "1440x900" in xorg.conf to get the wide screen. [Can you confirm that dri (direct rendering also works fine?) glxgears should run with a high (over 1000fps) frame rate?]

* Oct-30-2006: on my hp nw8440 i had to disable the composite extension to get full 3D accelleration ( chipset: ati V5200, driver ati 8.29.6 )
Section "Extensions"
Option "Composite" "false"
EndSection

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync
** Try this as well if the other two don't work. Determined using powerstrip in windows.
ModeLine "1280x800" 68.625 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

** If the above ModeLine still makes the screen flicker (as it did on my nx7010) use the following
Modeline "1280x800" 68.625 1280 1304 1336 1408 800 804 808 816 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Talk:Ubuntu Dapper Installation Guide

2006-11-18T18:16:42Z

84.160.194.4: spam removed

Wow, I followed this and it doesn't work, either method......

Now what? nobody to turn to, no more help available. Is it an ATI problem or a Dapper one?

I would have never believed that as "advanced" as this O/S is that it is this difficult to get a display driver to work.

This is absolutely incredible....

the problem is the driver, not the operating system.. ATI should take a lesson from nVidia.

[UBfusion reporting]: Many ATI chipsets suffer from this, due to faulty libGl.so.1.2 in the new ATI drivers - use the old file from old drivers, read http://ubuntuforums.org/showthread.php?t=185033

== try using ONLY 128MB of UMA memory instead of Sideport+UMA ==

This is a really strange problem with the HP/Compaq R4000/zv6000:

Once upon a time, ATI driver fglrx_6_8_0-8.13.4-1.i386.rpm provided full DRI and 3D support on Ubuntu 5.04 kernel 2.6.10.
( wget http://www2.ati.com/drivers/linux/fglrx_6_8_0-8.13.4-1.i386.rpm )

Then, ATI's new releases only worked if we used 128MB of shared/system/UMA memory along with the 128MB of onboard video
memory many of these laptop models have.

Now, after installing Ubuntu 6.0.6 kernel 2.6.15, the ATI driver will only work with full DRI and 3D support if I
totally disable the 128MB of onboard video memory and use ONLY shared/system/UMA memory( 128MB )....

Now, with my fully functioning Ubuntu 5.0.4 installation, when I go from only Sideport to only UMA, the glxgears
output goes from ~1200fps to ~500fps

With the new kernel and Xorg server of Ubuntu 6.0.6 running only UMA video memory and the 5.0.4 version of glxgears,
output from that program is ~800fps. Still a 30% decrease in performance from using the 128MB of onboard/Sideport
video memory.

IMO, running like this is not a fix but a crippled hack and it would be really nice if HP/Compaq or ATI would tell us
what the problem is, why it exists, how it is to be fixed. So try just 128M of UMA in your BIOS and see if that enables
you to get DRI/Direct Rendering working with the ATI/fglrx driver.

OK - I noticed that the wiki had been updated to reflect the 8.26.18 release but the line relating to the Xpress 200M card not functioning with the 8.25.18 drivers was unchanged. Can someone confirm if the 8.26.18 drivers work with the 200M card or not?

*I just tried it with the 8.28.8 drivers and while it does run with Sideport and UMA on it doesn't run well, including drawing errors and freezes shortly after logging in.

Also effected my xpress 200m on 64bit hp pavillion. changing to fglrx and using the guide worked. but only at 128mb uma. this could be a problem for a few people and could be mentioned.

== almost work in Compaq nx7010 ==

Hi,

I tryied everything I found with this $#%&"@ ati video card and, after 3 days of little sleeping and several distros & reinstallations, the closest to a working configuration I got was with Ubuntu dapper and method 1 in your guide (including HP zt3000 / Compaq nx7000 troubleshooting). Logically it seems to work (fglrxinfo reports OpenGL vendor string: ATI Technologies Inc., etc.) but phisically it doesn't (see the picture at [http://www.tirata.com/nx7010/nx7010.jpg]). Image is barely usable (loggin in that way I was able to run fglrxinfo), it covers 60% of the screen horizontally and flickers a lot.

Any ideas how to fix it?

[[Image:http://www.tirata.com/nx7010/nx7010.jpg]]

Mhhh could you post please your xorg.conf file in order to double check it? You could add the following too: max resolution (seems to be 1280 x 800 TFT), GPU Model (seems to be an ATI Radeon Mobility 9200, issue a lspci -v to know exactly the chipset type). With that info in hand __perhaps__ something can be done, some log files would be appreciated too.

As you describe it could be a problem with the Modelines configuration in xorg driving the TFT display out of sync. Try a lower resolution (say 1024x768, 800x600, 640x480); if it doesn't work try defining a manual modeline for the resolution you are trying. Good luck and keep posting! :-)

== nx7000 problem ==

I have a strange problem with the ModeLine. It works when i use the ModeLine for the nx7010, but only the default resolution of 1680x1050. When i choose a lower resolution for example 1024x768 the screen is not useable. Can somebody help me? I have testet some ModeLine generaters, but nothing works.

== debhelper ==
I found that I also needed to "apt-get install debhelper" before I could manually install the ati drivers

== It worked in Etch for me. ==

I have Etch installed, with a Radeon 9550 card. I followed this guide, and the drivers installed without event. It was flawless. I want to thank whoever wrote this tutorial. Documentation does not get any better than this! This is why Ubuntu will take over the world, because of its fantastic user community!

== Guide for edgy ==

Can you write installation instructions for Ubunty Edgy. When installing I get error message:
<pre>./ati-installer.sh: 176: Syntax error: Bad substitution</pre>

There is something about finding Firefox browser in 176th line of this file.

--[[User:82.143.132.112|82.143.132.112]] 02:59, 13 October 2006 (CDT)

There already IS a guide for edgy:
http://wiki.cchtml.com/index.php/Ubuntu_Edgy_Installation_Guide

== Stefan Dox ==

Genuinely interested by the website

== Method 1 snipped, why? ==

On 10/28/06 user 211.232.210.154 snipped Method 1. I was going to revert it back to prior version but wanted to put out a call here first in case anyone knows why that would have been intentional.

Installing

2006-11-18T18:15:07Z

84.160.194.4: spam

Ubuntu Installation Guide

2006-11-18T18:13:13Z

84.160.194.4: spam removed

*[[Ubuntu_Breezy_Installation_Guide|Breezy (5.10) Installation Guide]]
*[[Ubuntu_Dapper_Installation_Guide|Dapper (6.06) Installation Guide]]
*[[Ubuntu_Edgy_Installation_Guide|Edgy (6.10) Installation Guide]]

Ubuntu Edgy Installation Guide

2006-11-15T20:16:59Z

84.160.156.167: missed the heading...

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Edgy's Included Driver (8.28.8)==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "Disable"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*Another potentially useful guide: [http://ubuntuforums.org/showthread.php?t=273934]

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.31.5 drivers in Ubuntu Edgy Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "Disable"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===

As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.28.8), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.31.5-x86.x86_64.run ati-driver-installer-8.31.5-x86.x86_64.run] (this installer is for 32bit '''and''' 64bit systems)

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debhelper debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
sudo dpkg -i fglrx-control_8.31.5-1*.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''IMPORTANT''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

'''Note:'''
You could also edit your ''/etc/X11/xorg.conf'' file to change your driver to '''fglrx''' then run:

<pre>
sudo aticonfig --overlay-type=Xv
</pre>

This way your ''xorg.conf'' file will stay clean.

''Now Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6119 (8.30.3)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled, you may have to symlink the dri folder:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

=== The module compiles, but doesn't work ===
For some reason fglrx may need gcc-4.0 to compile, if you experience some message related to gcc version in dmesg, try this:

First we'll install it

<pre>
sudo apt-get install gcc-4.0
</pre>

and link it to gcc.

<pre>
sudo ln -sf /usr/bin/gcc-4.0 /usr/bin/gcc
</pre>

After doing the module-assistant steps, you may want to return gcc to 4.1 by default:

<pre>
sudo ln -sf /usr/bin/gcc-4.1 /usr/bin/gcc
</pre>

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== DRI does not work although the fglrx module is loaded ===

If fglrxinfo shows:
<pre>
OpenGL vendor string: Mesa project: www.mesa3d.org
</pre>

Make sure the Composite extension is disabled, add this to your /etc/X11/xorg.conf file:
<pre>
Section "Extensions"
Option "Composite" "Disable"
EndSection
</pre>

This should also resolve the corrupted mouse cursor problem in dual-head mode.

=== Module isn't loaded ===
If the fglrx module isn't loaded try to add ''fglrx'' to /etc/modules on a new line. See also [https://launchpad.net/distros/ubuntu/+bug/63912 bug 63912].

{{Box File|/etc/modules|
<pre>
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

fglrx
</pre>
}}

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx device section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: if ''modprobe fglrx'' can't find the ''fglrx'' module, try rebuilding your kernel module dependency:

<pre>
sudo depmod -a
</pre>

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-11-15T20:16:25Z

84.160.156.167: 8.31.5

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Edgy's Included Driver (8.28.8)==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "Disable"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*Another potentially useful guide: [http://ubuntuforums.org/showthread.php?t=273934]

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.30.3 drivers in Ubuntu Edgy Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "Disable"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===

As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.28.8), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.31.5-x86.x86_64.run ati-driver-installer-8.31.5-x86.x86_64.run] (this installer is for 32bit '''and''' 64bit systems)

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debhelper debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.31.5-x86.x86_64.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.31.5-1*.deb
sudo dpkg -i fglrx-kernel-source_8.31.5-1*.deb
sudo dpkg -i fglrx-control_8.31.5-1*.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''IMPORTANT''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

'''Note:'''
You could also edit your ''/etc/X11/xorg.conf'' file to change your driver to '''fglrx''' then run:

<pre>
sudo aticonfig --overlay-type=Xv
</pre>

This way your ''xorg.conf'' file will stay clean.

''Now Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6119 (8.30.3)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled, you may have to symlink the dri folder:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

=== The module compiles, but doesn't work ===
For some reason fglrx may need gcc-4.0 to compile, if you experience some message related to gcc version in dmesg, try this:

First we'll install it

<pre>
sudo apt-get install gcc-4.0
</pre>

and link it to gcc.

<pre>
sudo ln -sf /usr/bin/gcc-4.0 /usr/bin/gcc
</pre>

After doing the module-assistant steps, you may want to return gcc to 4.1 by default:

<pre>
sudo ln -sf /usr/bin/gcc-4.1 /usr/bin/gcc
</pre>

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== DRI does not work although the fglrx module is loaded ===

If fglrxinfo shows:
<pre>
OpenGL vendor string: Mesa project: www.mesa3d.org
</pre>

Make sure the Composite extension is disabled, add this to your /etc/X11/xorg.conf file:
<pre>
Section "Extensions"
Option "Composite" "Disable"
EndSection
</pre>

This should also resolve the corrupted mouse cursor problem in dual-head mode.

=== Module isn't loaded ===
If the fglrx module isn't loaded try to add ''fglrx'' to /etc/modules on a new line. See also [https://launchpad.net/distros/ubuntu/+bug/63912 bug 63912].

{{Box File|/etc/modules|
<pre>
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

fglrx
</pre>
}}

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx device section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: if ''modprobe fglrx'' can't find the ''fglrx'' module, try rebuilding your kernel module dependency:

<pre>
sudo depmod -a
</pre>

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-11-14T16:20:26Z

84.160.150.205: spam removed

'''NOTE:''' This guide is '''only''' for Ubuntu 6.06 (Dapper)! Guides for other versions of Ubuntu can be found at the [[Ubuntu]] page.

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

The name of package change with 64 bits : example : sudo dpkg -i fglrx-control_8.29.6-1_amd64.deb

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to remove any old fglrx debs and recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled then you may have to ensure '''fglrx_dri.so''' is where it should be. Try to symblink the '''dri''' folder if you get no direct rendering:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

With recent fglrx, the <tt>make.sh</tt> in <tt>/usr/src/fglrx.tar.bz2</tt> (installed by the fglrx-kernel-source package) is not executable. You may need the following in order to make module-assistant happy:
<pre>
mkdir /tmp/scratch
pushd /tmp/scratch
tar xjf /usr/src/fglrx.tar.bz2
chmod +x modules/fglrx/make.sh
sudo tar cjf /usr/src/fglrx.tar.bz2 modules
popd
</pre>

If installing over a custom-built kernel (for example 2.6.18), the procedure above may need to be modified slightly, especially if you didn't use <tt>make-kpkg</tt> to install your kernel:
<pre>
# sudo module-assistant prepare # no ubuntu package for 2.6.18
sudo module-assistant update
sudo module-assistant build -k path/to/my/kernel/sources fglrx
sudo module-assistant install -k path/to/my/kernel/sources fglrx
sudo depmod -a
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: You may also having to rebuild your module dependency by using "depmod -a".

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 / nw8440 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ https://support.ati.com/]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/ http://www.rhthm.com/ati/]]. ''''

** sep-30-2006, mde wrote: Installed the 8.24 driver (hp dv8000 / dv8120ca w/ 200m) and it all works. I recommend this solution! Don't try to force the later drivers to work unless you're some sort of sadist :). (Had to set to Sideport+UMA 128MB)

* sep-12-2006, tekNico wrote: on an HP dv5008EA with the 200M adapter, DRI works with the 8.24.8 driver, and setting the BIOS to Sideport+UMA to 128MB video memory. The 8.28.8 breaks some on-screen widgets.

* Sep-27-2006: HP Pavilion dv8000 (Radeon Xpress 200M). Turned off Sideport and installed the driver from the repositories, ver 8.25.18. The computer started up fine, but was extremely unstable and crashed in about 5 minutes of work. Same thing with driver ver 8.29.6. At the end I installed ver 8.24.8 and that seemed to work well.

* Oct-17-2006: webbertiger wrote: on my HP Pavilion dv8309us with Radeon Xpress 200M and AMD64 cpu, the driver (ati-driver-installer-8.29.6.run) downloaded from [ATI website[https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/64bit/ati-driver-installer-8.29.6.run]] works fine. I also manually added "1440x900" in xorg.conf to get the wide screen. [Can you confirm that dri (direct rendering also works fine?) glxgears should run with a high (over 1000fps) frame rate?]

* Oct-30-2006: on my hp nw8440 i had to disable the composite extension to get full 3D accelleration ( chipset: ati V5200, driver ati 8.29.6 )
Section "Extensions"
Option "Composite" "false"
EndSection

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync
** Try this as well if the other two don't work. Determined using powerstrip in windows.
ModeLine "1280x800" 68.625 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

** If the above ModeLine still makes the screen flicker (as it did on my nx7010) use the following
Modeline "1280x800" 68.625 1280 1304 1336 1408 800 804 808 816 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-11-05T12:01:09Z

84.160.154.133: spam removed

'''NOTE:''' This guide is '''only''' for Ubuntu 6.06 (Dapper)! Guides for other versions of Ubuntu can be found at the [[Ubuntu]] page.

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

The name of package change with 64 bits : example : sudo dpkg -i fglrx-control_8.29.6-1_amd64.deb

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to remove any old fglrx debs and recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled then you may have to ensure '''fglrx_dri.so''' is where it should be. Try to symblink the '''dri''' folder if you get no direct rendering:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

With recent fglrx, the <tt>make.sh</tt> in <tt>/usr/src/fglrx.tar.bz2</tt> (installed by the fglrx-kernel-source package) is not executable. You may need the following in order to make module-assistant happy:
<pre>
mkdir /tmp/scratch
pushd /tmp/scratch
tar xjf /usr/src/fglrx.tar.bz2
chmod +x modules/fglrx/make.sh
sudo tar cjf /usr/src/fglrx.tar.bz2 modules
popd
</pre>

If installing over a custom-built kernel (for example 2.6.18), the procedure above may need to be modified slightly, especially if you didn't use <tt>make-kpkg</tt> to install your kernel:
<pre>
# sudo module-assistant prepare # no ubuntu package for 2.6.18
sudo module-assistant update
sudo module-assistant build -k path/to/my/kernel/sources fglrx
sudo module-assistant install -k path/to/my/kernel/sources fglrx
sudo depmod -a
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: You may also having to rebuild your module dependency by using "depmod -a".

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 / nw8440 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ https://support.ati.com/]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/ http://www.rhthm.com/ati/]]. ''''

** sep-30-2006, mde wrote: Installed the 8.24 driver (hp dv8000 / dv8120ca w/ 200m) and it all works. I recommend this solution! Don't try to force the later drivers to work unless you're some sort of sadist :). (Had to set to Sideport+UMA 128MB)

* sep-12-2006, tekNico wrote: on an HP dv5008EA with the 200M adapter, DRI works with the 8.24.8 driver, and setting the BIOS to Sideport+UMA to 128MB video memory. The 8.28.8 breaks some on-screen widgets.

* Sep-27-2006: HP Pavilion dv8000 (Radeon Xpress 200M). Turned off Sideport and installed the driver from the repositories, ver 8.25.18. The computer started up fine, but was extremely unstable and crashed in about 5 minutes of work. Same thing with driver ver 8.29.6. At the end I installed ver 8.24.8 and that seemed to work well.

* Oct-17-2006: webbertiger wrote: on my HP Pavilion dv8309us with Radeon Xpress 200M and AMD64 cpu, the driver (ati-driver-installer-8.29.6.run) downloaded from [ATI website[https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/64bit/ati-driver-installer-8.29.6.run]] works fine. I also manually added "1440x900" in xorg.conf to get the wide screen. [Can you confirm that dri (direct rendering also works fine?) glxgears should run with a high (over 1000fps) frame rate?]

* Oct-30-2006: on my hp nw8440 i had to disable the composite extension to get full 3D accelleration ( chipset: ati V5200, driver ati 8.29.6 )
Section "Extensions"
Option "Composite" "false"
EndSection

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync
** Try this as well if the other two don't work. Determined using powerstrip in windows.
ModeLine "1280x800" 68.625 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

** If the above ModeLine still makes the screen flicker (as it did on my nx7010) use the following
Modeline "1280x800" 68.625 1280 1304 1336 1408 800 804 808 816 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-11-01T15:13:31Z

84.160.157.46: /* Installing the new driver */ thanks to the "*"-wildcard we don't have to distinguish between 32 and 64 bit anymore

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Edgy's Included Driver (8.28.8)==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.30.3 drivers in Ubuntu Edgy Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===

As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.28.8), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.30.3.run ati-driver-installer-8.30.3.run] (this installer is for 32bit '''and''' 64bit systems)

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.30.3.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.30.3-1*.deb
sudo dpkg -i fglrx-kernel-source_8.30.3-1*.deb
sudo dpkg -i fglrx-control_8.30.3-1*.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''IMPORTANT''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

'''Note:'''
You could also edit your ''/usr/X11/xorg.conf'' file to change your driver to '''fglrx''' then run:

<pre>
sudo aticonfig --overlay-type=Xv
</pre>

This way your ''xorg.conf'' file will stay clean.

''Now Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6119 (8.30.3)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled, you may have to symlink the dri folder:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== DRI does not work although the fglrx module is loaded ===

Make sure the Composite extension is disabled, add this to your /etc/X11/xorg.conf file:
<pre>
Section "Extensions"
Option "Composite" "Disable"
EndSection
</pre>

=== Module isn't loaded ===
If the fglrx module isn't loaded try to add ''fglrx'' to /etc/modules on a new line. See also [https://launchpad.net/distros/ubuntu/+bug/63912 bug 63912].

{{Box File|/etc/modules|
<pre>
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

fglrx
</pre>
}}

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx device section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: if ''modprobe fglrx'' can't find the ''fglrx'' module, try rebuilding your kernel module dependency:

<pre>
sudo depmod -a
</pre>

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Talk:Ubuntu Dapper Installation Guide

2006-10-31T23:38:29Z

84.160.160.38: /* Guide for edgy */

Wow, I followed this and it doesn't work, either method......

Now what? nobody to turn to, no more help available. Is it an ATI problem or a Dapper one?

I would have never believed that as "advanced" as this O/S is that it is this difficult to get a display driver to work.

This is absolutely incredible....

the problem is the driver, not the operating system.. ATI should take a lesson from nVidia.

[UBfusion reporting]: Many ATI chipsets suffer from this, due to faulty libGl.so.1.2 in the new ATI drivers - use the old file from old drivers, read http://ubuntuforums.org/showthread.php?t=185033

== try using ONLY 128MB of UMA memory instead of Sideport+UMA ==

This is a really strange problem with the HP/Compaq R4000/zv6000:

Once upon a time, ATI driver fglrx_6_8_0-8.13.4-1.i386.rpm provided full DRI and 3D support on Ubuntu 5.04 kernel 2.6.10.
( wget http://www2.ati.com/drivers/linux/fglrx_6_8_0-8.13.4-1.i386.rpm )

Then, ATI's new releases only worked if we used 128MB of shared/system/UMA memory along with the 128MB of onboard video
memory many of these laptop models have.

Now, after installing Ubuntu 6.0.6 kernel 2.6.15, the ATI driver will only work with full DRI and 3D support if I
totally disable the 128MB of onboard video memory and use ONLY shared/system/UMA memory( 128MB )....

Now, with my fully functioning Ubuntu 5.0.4 installation, when I go from only Sideport to only UMA, the glxgears
output goes from ~1200fps to ~500fps

With the new kernel and Xorg server of Ubuntu 6.0.6 running only UMA video memory and the 5.0.4 version of glxgears,
output from that program is ~800fps. Still a 30% decrease in performance from using the 128MB of onboard/Sideport
video memory.

IMO, running like this is not a fix but a crippled hack and it would be really nice if HP/Compaq or ATI would tell us
what the problem is, why it exists, how it is to be fixed. So try just 128M of UMA in your BIOS and see if that enables
you to get DRI/Direct Rendering working with the ATI/fglrx driver.

OK - I noticed that the wiki had been updated to reflect the 8.26.18 release but the line relating to the Xpress 200M card not functioning with the 8.25.18 drivers was unchanged. Can someone confirm if the 8.26.18 drivers work with the 200M card or not?

*I just tried it with the 8.28.8 drivers and while it does run with Sideport and UMA on it doesn't run well, including drawing errors and freezes shortly after logging in.

== almost work in Compaq nx7010 ==

Hi,

I tryied everything I found with this $#%&"@ ati video card and, after 3 days of little sleeping and several distros & reinstallations, the closest to a working configuration I got was with Ubuntu dapper and method 1 in your guide (including HP zt3000 / Compaq nx7000 troubleshooting). Logically it seems to work (fglrxinfo reports OpenGL vendor string: ATI Technologies Inc., etc.) but phisically it doesn't (see the picture at [http://www.tirata.com/nx7010/nx7010.jpg]). Image is barely usable (loggin in that way I was able to run fglrxinfo), it covers 60% of the screen horizontally and flickers a lot.

Any ideas how to fix it?

[[Image:http://www.tirata.com/nx7010/nx7010.jpg]]

Mhhh could you post please your xorg.conf file in order to double check it? You could add the following too: max resolution (seems to be 1280 x 800 TFT), GPU Model (seems to be an ATI Radeon Mobility 9200, issue a lspci -v to know exactly the chipset type). With that info in hand __perhaps__ something can be done, some log files would be appreciated too.

As you describe it could be a problem with the Modelines configuration in xorg driving the TFT display out of sync. Try a lower resolution (say 1024x768, 800x600, 640x480); if it doesn't work try defining a manual modeline for the resolution you are trying. Good luck and keep posting! :-)

== nx7000 problem ==

I have a strange problem with the ModeLine. It works when i use the ModeLine for the nx7010, but only the default resolution of 1680x1050. When i choose a lower resolution for example 1024x768 the screen is not useable. Can somebody help me? I have testet some ModeLine generaters, but nothing works.

== debhelper ==
I found that I also needed to "apt-get install debhelper" before I could manually install the ati drivers

== It worked in Etch for me. ==

I have Etch installed, with a Radeon 9550 card. I followed this guide, and the drivers installed without event. It was flawless. I want to thank whoever wrote this tutorial. Documentation does not get any better than this! This is why Ubuntu will take over the world, because of its fantastic user community!

== Guide for edgy ==

Can you write installation instructions for Ubunty Edgy. When installing I get error message:
<pre>./ati-installer.sh: 176: Syntax error: Bad substitution</pre>

There is something about finding Firefox browser in 176th line of this file.

--[[User:82.143.132.112|82.143.132.112]] 02:59, 13 October 2006 (CDT)

There already IS a guide for edgy:
http://wiki.cchtml.com/index.php/Ubuntu_Edgy_Installation_Guide

== Stefan Dox ==

Genuinely interested by the website

== Method 1 snipped, why? ==

On 10/28/06 user 211.232.210.154 snipped Method 1. I was going to revert it back to prior version but wanted to put out a call here first in case anyone knows why that would have been intentional.

== kamasutra ==

I was well impressed with your site, keep up the hard work!
___________________________
http://www.loei.go.th/tour_travel/

== DanaKolin ==

Cool, informative and simple! T
hat's how it should really be! Webmasters, respect! I only wish that all website owners can realize that!
___________________________
http://www.krabi.go.th/men/

Ubuntu Dapper Installation Guide

2006-10-31T22:55:20Z

84.160.160.38:

'''NOTE:''' This guide is '''only''' for Ubuntu 6.06 (Dapper)! Guides for other versions of Ubuntu can be found at the [[Ubuntu]] page.

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

The name of package change with 64 bits : example : sudo dpkg -i fglrx-control_8.29.6-1_amd64.deb

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to remove any old fglrx debs and recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled then you may have to ensure '''fglrx_dri.so''' is where it should be. Try to symblink the '''dri''' folder if you get no direct rendering:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

With recent fglrx, the <tt>make.sh</tt> in <tt>/usr/src/fglrx.tar.bz2</tt> (installed by the fglrx-kernel-source package) is not executable. You may need the following in order to make module-assistant happy:
<pre>
mkdir /tmp/scratch
pushd /tmp/scratch
tar xjf /usr/src/fglrx.tar.bz2
chmod +x modules/fglrx/make.sh
sudo tar cjf /usr/src/fglrx.tar.bz2 modules
popd
</pre>

If installing over a custom-built kernel (for example 2.6.18), the procedure above may need to be modified slightly, especially if you didn't use <tt>make-kpkg</tt> to install your kernel:
<pre>
# sudo module-assistant prepare # no ubuntu package for 2.6.18
sudo module-assistant update
sudo module-assistant build -k path/to/my/kernel/sources fglrx
sudo module-assistant install -k path/to/my/kernel/sources fglrx
sudo depmod -a
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: You may also having to rebuild your module dependency by using "depmod -a".

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 / nw8440 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ https://support.ati.com/]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/ http://www.rhthm.com/ati/]]. ''''

** sep-30-2006, mde wrote: Installed the 8.24 driver (hp dv8000 / dv8120ca w/ 200m) and it all works. I recommend this solution! Don't try to force the later drivers to work unless you're some sort of sadist :). (Had to set to Sideport+UMA 128MB)

* sep-12-2006, tekNico wrote: on an HP dv5008EA with the 200M adapter, DRI works with the 8.24.8 driver, and setting the BIOS to Sideport+UMA to 128MB video memory. The 8.28.8 breaks some on-screen widgets.

* Sep-27-2006: HP Pavilion dv8000 (Radeon Xpress 200M). Turned off Sideport and installed the driver from the repositories, ver 8.25.18. The computer started up fine, but was extremely unstable and crashed in about 5 minutes of work. Same thing with driver ver 8.29.6. At the end I installed ver 8.24.8 and that seemed to work well.

* Oct-17-2006: webbertiger wrote: on my HP Pavilion dv8309us with Radeon Xpress 200M and AMD64 cpu, the driver (ati-driver-installer-8.29.6.run) downloaded from [ATI website[https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/64bit/ati-driver-installer-8.29.6.run]] works fine. I also manually added "1440x900" in xorg.conf to get the wide screen. [Can you confirm that dri (direct rendering also works fine?) glxgears should run with a high (over 1000fps) frame rate?]

* Oct-30-2006: on my hp nw8440 i had to disable the composite extension to get full 3D accelleration ( chipset: ati V5200, driver ati 8.29.6 )
Section "Extensions"
Option "Composite" "false"
EndSection

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync
** Try this as well if the other two don't work. Determined using powerstrip in windows.
ModeLine "1280x800" 68.625 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

** If the above ModeLine still makes the screen flicker (as it did on my nx7010) use the following
Modeline "1280x800" 68.625 1280 1304 1336 1408 800 804 808 816 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-10-31T22:54:21Z

84.160.160.38:

'''NOTE:''' This guide is '''only''' for Ubuntu 6.06 (Dapper)! Guides for other versions can be found at the [[Ubuntu]] page.

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

The name of package change with 64 bits : example : sudo dpkg -i fglrx-control_8.29.6-1_amd64.deb

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to remove any old fglrx debs and recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled then you may have to ensure '''fglrx_dri.so''' is where it should be. Try to symblink the '''dri''' folder if you get no direct rendering:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

With recent fglrx, the <tt>make.sh</tt> in <tt>/usr/src/fglrx.tar.bz2</tt> (installed by the fglrx-kernel-source package) is not executable. You may need the following in order to make module-assistant happy:
<pre>
mkdir /tmp/scratch
pushd /tmp/scratch
tar xjf /usr/src/fglrx.tar.bz2
chmod +x modules/fglrx/make.sh
sudo tar cjf /usr/src/fglrx.tar.bz2 modules
popd
</pre>

If installing over a custom-built kernel (for example 2.6.18), the procedure above may need to be modified slightly, especially if you didn't use <tt>make-kpkg</tt> to install your kernel:
<pre>
# sudo module-assistant prepare # no ubuntu package for 2.6.18
sudo module-assistant update
sudo module-assistant build -k path/to/my/kernel/sources fglrx
sudo module-assistant install -k path/to/my/kernel/sources fglrx
sudo depmod -a
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: You may also having to rebuild your module dependency by using "depmod -a".

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 / nw8440 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ https://support.ati.com/]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/ http://www.rhthm.com/ati/]]. ''''

** sep-30-2006, mde wrote: Installed the 8.24 driver (hp dv8000 / dv8120ca w/ 200m) and it all works. I recommend this solution! Don't try to force the later drivers to work unless you're some sort of sadist :). (Had to set to Sideport+UMA 128MB)

* sep-12-2006, tekNico wrote: on an HP dv5008EA with the 200M adapter, DRI works with the 8.24.8 driver, and setting the BIOS to Sideport+UMA to 128MB video memory. The 8.28.8 breaks some on-screen widgets.

* Sep-27-2006: HP Pavilion dv8000 (Radeon Xpress 200M). Turned off Sideport and installed the driver from the repositories, ver 8.25.18. The computer started up fine, but was extremely unstable and crashed in about 5 minutes of work. Same thing with driver ver 8.29.6. At the end I installed ver 8.24.8 and that seemed to work well.

* Oct-17-2006: webbertiger wrote: on my HP Pavilion dv8309us with Radeon Xpress 200M and AMD64 cpu, the driver (ati-driver-installer-8.29.6.run) downloaded from [ATI website[https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/64bit/ati-driver-installer-8.29.6.run]] works fine. I also manually added "1440x900" in xorg.conf to get the wide screen. [Can you confirm that dri (direct rendering also works fine?) glxgears should run with a high (over 1000fps) frame rate?]

* Oct-30-2006: on my hp nw8440 i had to disable the composite extension to get full 3D accelleration ( chipset: ati V5200, driver ati 8.29.6 )
Section "Extensions"
Option "Composite" "false"
EndSection

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync
** Try this as well if the other two don't work. Determined using powerstrip in windows.
ModeLine "1280x800" 68.625 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

** If the above ModeLine still makes the screen flicker (as it did on my nx7010) use the following
Modeline "1280x800" 68.625 1280 1304 1336 1408 800 804 808 816 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-10-31T22:48:54Z

84.160.160.38: 8.30.3

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Edgy's Included Driver (8.28.8)==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.30.3 drivers in Ubuntu Edgy Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===

As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.28.8), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.30.3.run ati-driver-installer-8.30.3.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.30.3.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.30.3-1*.deb
sudo dpkg -i fglrx-kernel-source_8.30.3-1*.deb
sudo dpkg -i fglrx-control_8.30.3-1*.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''IMPORTANT''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

'''Note:'''
You could also edit your ''/usr/X11/xorg.conf'' file to change your driver to '''fglrx''' then run:

<pre>
sudo aticonfig --overlay-type=Xv
</pre>

This way your ''xorg.conf'' file will stay clean.

''Now Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled, you may have to symlink the dri folder:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== DRI does not work although the fglrx module is loaded ===

Make sure the Composite extension is disabled, add this to your /etc/X11/xorg.conf file:
<pre>
Section "Extensions"
Option "Composite" "Disable"
EndSection
</pre>

=== Module isn't loaded ===
If the fglrx module isn't loaded try to add ''fglrx'' to /etc/modules on a new line. See also [https://launchpad.net/distros/ubuntu/+bug/63912 bug 63912].

{{Box File|/etc/modules|
<pre>
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

fglrx
</pre>
}}

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx device section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: if ''modprobe fglrx'' can't find the ''fglrx'' module, try rebuilding your kernel module dependency:

<pre>
sudo depmod -a
</pre>

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-10-31T22:45:00Z

84.160.160.38: let's keep this small and simple - those who want to avoid the reboot can read the troubleshooting section...

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Edgy's Included Driver (8.28.8)==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Edgy Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===

As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.28.8), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1*.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1*.deb
sudo dpkg -i fglrx-control_8.29.6-1*.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''IMPORTANT''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

'''Note:'''
You could also edit your ''/usr/X11/xorg.conf'' file to change your driver to '''fglrx''' then run:

<pre>
sudo aticonfig --overlay-type=Xv
</pre>

This way your ''xorg.conf'' file will stay clean.

''Now Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled, you may have to symlink the dri folder:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== DRI does not work although the fglrx module is loaded ===

Make sure the Composite extension is disabled, add this to your /etc/X11/xorg.conf file:
<pre>
Section "Extensions"
Option "Composite" "Disable"
EndSection
</pre>

=== Module isn't loaded ===
If the fglrx module isn't loaded try to add ''fglrx'' to /etc/modules on a new line. See also [https://launchpad.net/distros/ubuntu/+bug/63912 bug 63912].

{{Box File|/etc/modules|
<pre>
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

fglrx
</pre>
}}

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx device section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: if ''modprobe fglrx'' can't find the ''fglrx'' module, try rebuilding your kernel module dependency:

<pre>
sudo depmod -a
</pre>

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-10-31T22:35:19Z

84.160.160.38: /* Installing the new driver */ This guide is NOT for edgy!

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

The name of package change with 64 bits : example : sudo dpkg -i fglrx-control_8.29.6-1_amd64.deb

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to remove any old fglrx debs and recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled then you may have to ensure '''fglrx_dri.so''' is where it should be. Try to symblink the '''dri''' folder if you get no direct rendering:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

With recent fglrx, the <tt>make.sh</tt> in <tt>/usr/src/fglrx.tar.bz2</tt> (installed by the fglrx-kernel-source package) is not executable. You may need the following in order to make module-assistant happy:
<pre>
mkdir /tmp/scratch
pushd /tmp/scratch
tar xjf /usr/src/fglrx.tar.bz2
chmod +x modules/fglrx/make.sh
sudo tar cjf /usr/src/fglrx.tar.bz2 modules
popd
</pre>

If installing over a custom-built kernel (for example 2.6.18), the procedure above may need to be modified slightly, especially if you didn't use <tt>make-kpkg</tt> to install your kernel:
<pre>
# sudo module-assistant prepare # no ubuntu package for 2.6.18
sudo module-assistant update
sudo module-assistant build -k path/to/my/kernel/sources fglrx
sudo module-assistant install -k path/to/my/kernel/sources fglrx
sudo depmod -a
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: You may also having to rebuild your module dependency by using "depmod -a".

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 / nw8440 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ https://support.ati.com/]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/ http://www.rhthm.com/ati/]]. ''''

** sep-30-2006, mde wrote: Installed the 8.24 driver (hp dv8000 / dv8120ca w/ 200m) and it all works. I recommend this solution! Don't try to force the later drivers to work unless you're some sort of sadist :). (Had to set to Sideport+UMA 128MB)

* sep-12-2006, tekNico wrote: on an HP dv5008EA with the 200M adapter, DRI works with the 8.24.8 driver, and setting the BIOS to Sideport+UMA to 128MB video memory. The 8.28.8 breaks some on-screen widgets.

* Sep-27-2006: HP Pavilion dv8000 (Radeon Xpress 200M). Turned off Sideport and installed the driver from the repositories, ver 8.25.18. The computer started up fine, but was extremely unstable and crashed in about 5 minutes of work. Same thing with driver ver 8.29.6. At the end I installed ver 8.24.8 and that seemed to work well.

* Oct-17-2006: webbertiger wrote: on my HP Pavilion dv8309us with Radeon Xpress 200M and AMD64 cpu, the driver (ati-driver-installer-8.29.6.run) downloaded from [ATI website[https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/64bit/ati-driver-installer-8.29.6.run]] works fine. I also manually added "1440x900" in xorg.conf to get the wide screen. [Can you confirm that dri (direct rendering also works fine?) glxgears should run with a high (over 1000fps) frame rate?]

* Oct-30-2006: on my hp nw8440 i had to disable the composite extension to get full 3D accelleration ( chipset: ati V5200, driver ati 8.29.6 )
Section "Extensions"
Option "Composite" "false"
EndSection

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync
** Try this as well if the other two don't work. Determined using powerstrip in windows.
ModeLine "1280x800" 68.625 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

** If the above ModeLine still makes the screen flicker (as it did on my nx7010) use the following
Modeline "1280x800" 68.625 1280 1304 1336 1408 800 804 808 816 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-10-27T17:32:51Z

84.160.141.89: revert to 03:00, 18 October 2006 -- there is a separate guide for edgy

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

The name of package change with 64 bits : example : sudo dpkg -i fglrx-control_8.29.6-1_amd64.deb

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to remove any old fglrx debs and recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled then you may have to ensure '''fglrx_dri.so''' is where it should be. Try to symblink the '''dri''' folder if you get no direct rendering:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

With recent fglrx, the <tt>make.sh</tt> in <tt>/usr/src/fglrx.tar.bz2</tt> (installed by the fglrx-kernel-source package) is not executable. You may need the following in order to make module-assistant happy:
<pre>
mkdir /tmp/scratch
pushd /tmp/scratch
tar xjf /usr/src/fglrx.tar.bz2
chmod +x modules/fglrx/make.sh
sudo tar cjf /usr/src/fglrx.tar.bz2 modules
popd
</pre>

If installing over a custom-built kernel (for example 2.6.18), the procedure above may need to be modified slightly, especially if you didn't use <tt>make-kpkg</tt> to install your kernel:
<pre>
# sudo module-assistant prepare # no ubuntu package for 2.6.18
sudo module-assistant update
sudo module-assistant build -k path/to/my/kernel/sources fglrx
sudo module-assistant install -k path/to/my/kernel/sources fglrx
sudo depmod -a
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: You may also having to rebuild your module dependency by using "depmod -a".

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ https://support.ati.com/]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/ http://www.rhthm.com/ati/]]. ''''

** sep-30-2006, mde wrote: Installed the 8.24 driver (hp dv8000 / dv8120ca w/ 200m) and it all works. I recommend this solution! Don't try to force the later drivers to work unless you're some sort of sadist :). (Had to set to Sideport+UMA 128MB)

* sep-12-2006, tekNico wrote: on an HP dv5008EA with the 200M adapter, DRI works with the 8.24.8 driver, and setting the BIOS to Sideport+UMA to 128MB video memory. The 8.28.8 breaks some on-screen widgets.

* Sep-27-2006: HP Pavilion dv8000 (Radeon Xpress 200M). Turned off Sideport and installed the driver from the repositories, ver 8.25.18. The computer started up fine, but was extremely unstable and crashed in about 5 minutes of work. Same thing with driver ver 8.29.6. At the end I installed ver 8.24.8 and that seemed to work well.

* Oct-17-2006: webbertiger wrote: on my HP Pavilion dv8309us with Radeon Xpress 200M and AMD64 cpu, the driver (ati-driver-installer-8.29.6.run) downloaded from [ATI website[https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/64bit/ati-driver-installer-8.29.6.run]] works fine. I also manually added "1440x900" in xorg.conf to get the wide screen.

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync
** Try this as well if the other two don't work. Determined using powerstrip in windows.
ModeLine "1280x800" 68.625 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

** If the above ModeLine still makes the screen flicker (as it did on my nx7010) use the following
Modeline "1280x800" 68.625 1280 1304 1336 1408 800 804 808 816 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-10-12T20:49:33Z

84.160.198.17: spam removed

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to remove any old fglrx debs and recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled then you may have to ensure '''fglrx_dri.so''' is where it should be. Try to symblink the '''dri''' folder if you get no direct rendering:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

With recent fglrx, the <tt>make.sh</tt> in <tt>/usr/src/fglrx.tar.bz2</tt> (installed by the fglrx-kernel-source package) is not executable. You may need the following in order to make module-assistant happy:
<pre>
mkdir /tmp/scratch
pushd /tmp/scratch
tar xjf /usr/src/fglrx.tar.bz2
chmod +x modules/fglrx/make.sh
sudo tar cjf /usr/src/fglrx.tar.bz2 modules
popd
</pre>

If installing over a custom-built kernel (for example 2.6.18), the procedure above may need to be modified slightly, especially if you didn't use <tt>make-kpkg</tt> to install your kernel:
<pre>
# sudo module-assistant prepare # no ubuntu package for 2.6.18
sudo module-assistant update
sudo module-assistant build -k path/to/my/kernel/sources fglrx
sudo module-assistant install -k path/to/my/kernel/sources fglrx
sudo depmod -a
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: You may also having to rebuild your module dependency by using "depmod -a".

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ https://support.ati.com/]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/ http://www.rhthm.com/ati/]]. ''''

** sep-30-2006, mde wrote: Installed the 8.24 driver (hp dv8000 / dv8120ca w/ 200m) and it all works. I recommend this solution! Don't try to force the later drivers to work unless you're some sort of sadist :). (Had to set to Sideport+UMA 128MB)

* sep-12-2006, tekNico wrote: on a HP dv5008EA with the 200M adapter, DRI works with the 8.24.8 driver, and setting the BIOS to Sideport+UMA to 128MB video memory. The 8.28.8 breaks some on-screen widgets.

* Sep-27-2006: HP Pavilion dv8000 (Radeon Xpress 200M). Turned off Sideport and installed the driver from the repositories, ver 8.25.18. The computer started up fine, but was extremely unstable and crashed in about 5 minutes of work. Same thing with driver ver 8.29.6. At the end I installed ver 8.24.8 and that seemed to work well.

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync
** Try this as well if the other two don't work. Determined using powerstrip in windows.
ModeLine "1280x800" 68.625 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

** If the above ModeLine still makes the screen flicker (as it did on my nx7010) use the following
Modeline "1280x800" 68.625 1280 1304 1336 1408 800 804 808 816 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-10-10T17:55:38Z

84.160.199.56: /* Troubleshooting for both Methods */

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Edgy's Included Driver (8.28.8)==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Edgy Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===

As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.28.8), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''IMPORTANT''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

'''Note:'''
You could also edit your ''/usr/X11/xorg.conf'' file to change your driver to '''fglrx''' then run:

<pre>
sudo aticonfig --overlay-type=Xv
</pre>

This way your ''xorg.conf'' file will stay clean.

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled, you may have to symlink the dri folder:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== DRI does not work although the fglrx module is loaded ===

Make sure the Composite extension is disabled, add this to your /etc/X11/xorg.conf file:
<pre>
Section "Extensions"
Option "Composite" "Disable"
EndSection
</pre>

=== Module isn't loaded ===
If the fglrx module isn't loaded try to add ''fglrx'' to /etc/modules on a new line. See also [https://launchpad.net/distros/ubuntu/+bug/63912 bug 63912].

{{Box File|/etc/modules|
<pre>
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

fglrx
</pre>
}}

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: if ''modprobe fglrx'' can't find the ''fglrx'' module, try rebuilding your kernel module dependency:

<pre>
sudo depmod -a
</pre>

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-10-10T17:51:50Z

84.160.199.56: /* Module isn't loaded */

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Edgy's Included Driver (8.28.8)==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Edgy Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===

As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.28.8), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''IMPORTANT''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

'''Note:'''
You could also edit your ''/usr/X11/xorg.conf'' file to change your driver to '''fglrx''' then run:

<pre>
sudo aticonfig --overlay-type=Xv
</pre>

This way your ''xorg.conf'' file will stay clean.

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

<pre>
$ glxinfo | grep render
direct rendering: Yes
</pre>

If your direct rendering is disabled, you may have to symlink the dri folder:

<pre>
sudo mkdir /usr/X11R6/lib/modules
sudo ln -s /usr/lib/dri /usr/X11R6/lib/modules/
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== DRI Error and still loading MESA driver ===

Add this to your /etc/X11/xorg.conf file
<pre>
Section "Extensions"
Option "Composite" "Disable"
EndSection
</pre>

=== Module isn't loaded ===
If the fglrx module isn't loaded try to add ''fglrx'' to /etc/modules on a new line. See also [https://launchpad.net/distros/ubuntu/+bug/63912 bug 63912].

{{Box File|/etc/modules|
<pre>
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

fglrx
</pre>
}}

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

Note: if ''modprobe fglrx'' can't find the ''fglrx'' module, try rebuilding your kernel module dependency:

<pre>
sudo depmod -a
</pre>

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-09-26T17:10:21Z

84.160.141.8: /* Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually */ moved troubleshooting stuff to troubleshooting-section

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to remove any old fglrx debs and recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

With recent fglrx, the <tt>make.sh</tt> in <tt>/usr/src/fglrx.tar.bz2</tt> (installed by the fglrx-kernel-source package) is not executable. You may need the following in order to make module-assistant happy:
<pre>
mkdir /tmp/scratch
pushd /tmp/scratch
tar xjf /usr/src/fglrx.tar.bz2
chmod +x modules/fglrx/make.sh
sudo tar cjf /usr/src/fglrx.tar.bz2 modules
popd
</pre>

If installing over a custom-built kernel (for example 2.6.18), the procedure above may need to be modified slightly, especially if you didn't use <tt>make-kpkg</tt> to install your kernel:
<pre>
# sudo module-assistant prepare # no ubuntu package for 2.6.18
sudo module-assistant update
sudo module-assistant build -k path/to/my/kernel/sources fglrx
sudo module-assistant install -k path/to/my/kernel/sources fglrx
sudo depmod -a
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ https://support.ati.com/]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/ http://www.rhthm.com/ati/]]. ''''

* sep-12-2006, tekNico wrote: on a HP dv5008EA with the 200M adapter, DRI works with the 8.24.8 driver, and setting the BIOS to Sideport+UMA to 128MB video memory. The 8.28.8 breaks some on-screen widgets.

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

8.29.6

2006-09-21T16:26:33Z

84.160.198.119:

== New Features ==

The ATI Proprietary Linux software driver introduces Linux Kernel 2.6.18 support.

== Resolved Issues ==

The following section provide a brief description of resolved issues with the latest version of the ATI Proprietary Linux driver. These include:
* Unreal Tournament 2004: Using the in-game options to change the desktop display resolution no longer results in the display failing to refresh properly when exiting the game. Further details can be found in topic number 737-23307
* SpecViewPerf: Running the sub-test UGS-04 no longer results in the operating system failing to respond. Further details can be found in topic number 737-23308

== Known Issues ==

The following section provides a brief description of known issues associated with the latest version of ATI Proprietary Linux driver. These issues include:
* Attempting to install the ATI Proprietary Linux driver on distributions that have updated certain 3D components outside of the stock XOrg 6.8.2 may result in the driver not initializing 3D applications properly. Further details can be found in topic number 737-20868
* A system hang may occur when attempting to resume from hibernation mode. Further details can be found in topic number 737-22059
* Loading the XVideo Extension on 64-bit Xorg 6.9+ systems causes the X Server to segfault on launch with ATI Radeon X1K products. Further details and the workaround can be found in topic number 737-22837
* Users with X Server X.org 7.1 can not play any video using XV. The ATI AVIVO Video adaptor is not present. Further details and the workaround can be found in topic number 737-22852

For further information and general help on driver or software installation, game issues, and more, visit the [https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge ATI FAQ website].

== Additional Information ==

R200 based hardware is no longer supported by this driver.

== Links ==

* Download: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run 32-bit and 64-bit Unified Installer]
* Full Release Notes: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/linux_8.29.6.html linux_8.29.6.html]

[[Category:Releases]]

8.29.6

2006-09-21T16:25:02Z

84.160.198.119:

Ubuntu Edgy Installation Guide

2006-09-21T13:10:35Z

84.160.198.119: /* Method 1: Installing Edgy's Included Driver */

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Edgy's Included Driver (8.28.8)==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Edgy Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===

As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.28.8), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-21T13:09:48Z

84.160.198.119: warning removed, both methods worked fine with my radeon 9700

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Edgy's Included Driver ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Edgy Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===

As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.28.8), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-21T13:07:52Z

84.160.198.119:

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Big Fat Warning ==

=== Read this before doing anything else! ===
This guide is '''NOT YET''' thoroughly tested. It is based on a modified copy of the Dapper-Guide. Maybe it will work for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Edgy Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===

As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.28.8), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-09-21T13:05:14Z

84.160.198.119: /* Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually */

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to remove any old fglrx debs and recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ https://support.ati.com/]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/ http://www.rhthm.com/ati/]]. ''''

* sep-12-2006, tekNico wrote: on a HP dv5008EA with the 200M adapter, DRI works with the 8.24.8 driver, and setting the BIOS to Sideport+UMA to 128MB video memory. The 8.28.8 breaks some on-screen widgets.

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-09-21T13:04:41Z

84.160.198.119: 8.29.6

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the new 8.29.6 drivers in Ubuntu Dapper Manually ==

The new fglrx driver supports Radeon '''9'''500+ (older cards will not work!) and the X-series cards up to X1900.

'''Important Change:''' Installation of this driver '''no longer requires''' removing the linux-restricted-modules package in order to work. There is a new blacklist feature in Ubuntu Dapper that you can use to go around this.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.29.6.run ati-driver-installer-8.29.6.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.29.6.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.29.6-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.29.6-1_i386.deb
sudo dpkg -i fglrx-control_8.29.6-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to remove any old fglrx debs and recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6065 (8.29.6)
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ https://support.ati.com/]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/ http://www.rhthm.com/ati/]]. ''''

* sep-12-2006, tekNico wrote: on a HP dv5008EA with the 200M adapter, DRI works with the 8.24.8 driver, and setting the BIOS to Sideport+UMA to 128MB video memory. The 8.28.8 breaks some on-screen widgets.

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu

2006-09-18T21:07:29Z

84.160.164.78:

== General Status ==
* Included with Distribution
* Native Installer Support contributed by Aric Cyr

== Installation ==
*[[Ubuntu_Breezy_Installation_Guide|Breezy (5.10) Installation Guide]]
*[[Ubuntu_Dapper_Installation_Guide|Dapper (6.06) Installation Guide]]
*[[Ubuntu_Edgy_Installation_Guide|Edgy (6.10) Installation Guide]]

== Tips and Tricks ==
* To build your own .deb packages for Ubuntu you will need to install at least the following packages from the apt repositories:
** build-essential
** module-assistant
** fakeroot
** dh-make
** debconf

* If you want to use a newer version of the driver than the one which comes with your distribution and you have ''linux-restricted-modules'' installed, you have to disable the fglrx kernel module from ''linux-restricted-modules'' because it will invariably get in the way of your more recent drivers. Detailed information on how to achieve this can be found in the distribution-specific guides.

* You can configure the driver with the '''aticonfig''' tool, more information can be found at [[Configuring]].

== Related Resources ==
* Ubuntuforums.org Video forum: [http://ubuntuforums.org/forumdisplay.php?f=114 Breezy], [http://ubuntuforums.org/forumdisplay.php?f=138 Dapper]

{{VCT}}

[[Category:Distributions]]

Ubuntu Edgy Installation Guide

2006-09-18T11:52:33Z

84.160.164.78: /* Confirm that it works */

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Big Fat Warning ==

=== Read this before doing anything else! ===
This guide is '''NOT YET''' thoroughly tested. It is based on a modified copy of the Dapper-Guide. Maybe it will work for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-18T11:48:08Z

84.160.164.78: /* Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually */

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Big Fat Warning ==

=== Read this before doing anything else! ===
This guide is '''NOT YET''' thoroughly tested. It is based on a modified copy of the Dapper-Guide. Maybe it will work for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-18T11:46:30Z

84.160.164.78: /* Disable Composite Extension */

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Big Fat Warning ==

=== Read this before doing anything else! ===
This guide is '''NOT YET''' thoroughly tested. It is based on a modified copy of the Dapper-Guide. Maybe it will work for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== Blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-18T11:46:10Z

84.160.164.78: /* Disable Composite Extension */

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Big Fat Warning ==

=== Read this before doing anything else! ===
This guide is '''NOT YET''' thoroughly tested. It is based on a modified copy of the Dapper-Guide. Maybe it will work for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default, however, ''fglrx'' does not yet support Composite with DRI. In order to to disable Composite you have to edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== Blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-18T11:43:27Z

84.160.164.78: /* Read this before doing anything else! */

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Big Fat Warning ==

=== Read this before doing anything else! ===
This guide is '''NOT YET''' thoroughly tested. It is based on a modified copy of the Dapper-Guide. Maybe it will work for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== Blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-17T23:34:13Z

84.160.186.145:

In Ubuntu Edgy you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Big Fat Warning ==

=== Read this before doing anything else! ===
This is '''NOT''' a tested guide for Ubuntu Edgy. It is just a modified copy of the Dapper-Guide. Maybe it works for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== Blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-17T23:33:31Z

84.160.186.145:

== Big Fat Warning ==

=== Read this before doing anything else! ===
This is '''NOT''' a tested guide for Ubuntu Edgy. It is just a modified copy of the Dapper-Guide. Maybe it works for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''. You may have to run '''sudo lrm-manager''' afterwards.

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== Blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-17T23:10:41Z

84.160.186.145: /* Installing the new driver */ unfortunately the /bin/sh changing seems to be the only way :(

== Big Fat Warning ==

=== Read this before doing anything else! ===
This is '''NOT''' a tested guide for Ubuntu Edgy. It is just a modified copy of the Dapper-Guide. Maybe it works for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== Blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
sudo ln -sf bash /bin/sh
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
sudo ln -sf dash /bin/sh
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-09-07T19:14:19Z

84.160.159.101: /* Installing the new driver */

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Dapper Manually ==

'''Important Change:''' Installation of this driver '''no longer requires''' removing the linux-restricted-modules package in order to work. There is a new blacklist feature in Ubuntu Dapper that you can use to go around this.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' package which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ics/support/KBAnswer.asp?questionID=1714 https://support.ati.com/ics/support/KBAnswer.asp?questionID=1714]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/index.html http://www.rhthm.com/ati/index.html]].

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-09-07T19:13:45Z

84.160.159.101: /* Installing the new driver */ i think it's better to keep the guide simple for the "average 32bit user"

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Dapper Manually ==

'''Important Change:''' Installation of this driver '''no longer requires''' removing the linux-restricted-modules package in order to work. There is a new blacklist feature in Ubuntu Dapper that you can use to go around this.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except the filenames of the created .deb packages will differ slightly and you have to install the ''ia32-libs'' which can be done with apt-get or synaptic.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ics/support/KBAnswer.asp?questionID=1714 https://support.ati.com/ics/support/KBAnswer.asp?questionID=1714]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/index.html http://www.rhthm.com/ati/index.html]].

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-09-07T19:01:44Z

84.160.159.101: /* Installing the new driver */

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Dapper Manually ==

'''Important Change:''' Installation of this driver '''no longer requires''' removing the linux-restricted-modules package in order to work. There is a new blacklist feature in Ubuntu Dapper that you can use to go around this.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''only needed on 64bit systems, skip when using 32bit:''
<pre>
sudo apt-get install ia32-libs
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ics/support/KBAnswer.asp?questionID=1714 https://support.ati.com/ics/support/KBAnswer.asp?questionID=1714]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/index.html http://www.rhthm.com/ati/index.html]].

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-09-07T18:56:45Z

84.160.159.101: of course you shouldn't use blacklist with the included drivers, this is already mentioned in troubleshooting for method 1 (where it belongs)

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Dapper Manually ==

'''Important Change:''' Installation of this driver '''no longer requires''' removing the linux-restricted-modules package in order to work. There is a new blacklist feature in Ubuntu Dapper that you can use to go around this.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)

next step only for 64bit systems!

sudo apt-get install ia32-libs
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

Also, '''LIBGL_DEBUG=verbose glxinfo''' can display missing files you can 'fix' by linking directories.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ics/support/KBAnswer.asp?questionID=1714 https://support.ati.com/ics/support/KBAnswer.asp?questionID=1714]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/index.html http://www.rhthm.com/ati/index.html]].

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

** If the above ModeLine still makes the screen flicker (as it did in my zt3000) use the following ModeLine
ModeLine "1280x800" 70.875 1280 1336 1368 1440 800 802 808 823 -hsync +vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Dapper Installation Guide

2006-09-03T23:01:59Z

84.160.139.197: /* blacklist old fglrx module from linux-restricted-modules */

In Ubuntu Dapper you can choose between two methods of installing the proprietary ATI driver. If you are new to linux you should use the first method as it is a lot easier than the second one and will work well in most cases. The second method describes how to install the very latest driver version, but requires some additional work and knowledge.

== Method 1: Installing Dapper's Included Driver (8.25.18) ==

The included fglrx driver supports Radeon 8500+ and the X-series cards up to X1900.

Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version. The [[#Troubleshooting for Method 1|Troubleshooting]] section describes how to fix this '''after''' xorg-driver-fglrx is installed.

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

Help on enabling repositories can be found at https://help.ubuntu.com/community/Repositories/Ubuntu.

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

* Unfortunately OpenGL seems to be broken for R200 cards (everything below Radeon 9500) in this driver version which results in messages like
:<pre>[fglrx] API ERROR: could not register entrypoint for Uniform2iARB</pre>
:and similar when running OpenGL applications. This may be fixed by replacing ''/usr/lib/libGL.so.1.2'' with ''libGL.so.1.2'' from the previous driver version (8.24.8). To do so download this file: [http://files.covertprestige.info/important/libGL.so.1.2 libGL.so.1.2] and then copy it to the ''/usr/lib/'' directory.

*It might be necessary to create a symlink to get accelerated OpenGL:
:<pre>sudo ln -s /usr/lib/dri /usr/lib/xorg/modules/dri</pre>

*AMD64 users: It may also be necessary to update /etc/profile if using GDM. Update the $LIBGL_DRIVERS_PATH variable to point to the dri path above.

*To ensure you automatically get the current ''linux-restricted-modules'' package with kernel updates, you should install the linux-restricted-modules-??? package matching your kernel-type (without version numer), e.g. ''linux-restricted-modules-386'', ''linux-restricted-modules-686'' or ''linux-restricted-modules-k7''.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*If the screen is coming up blank on startup, start in recovery mode then try editing your /etc/X11/xorg.conf file to remove this line
: <pre>Load "extmod"</pre>
: and optionally replace it with this
<pre>SubSection "extmod"
Option "omit XVideo"
Option "omit XVideo-MotionCompensation"
Option "omit XFree86-VidModeExtension"
EndSubSection</pre>

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Dapper Manually ==

'''Important Change:''' Installation of this driver '''no longer requires''' removing the linux-restricted-modules package in order to work. There is a new blacklist feature in Ubuntu Dapper that you can use to go around this.

=== Blacklist old fglrx module from linux-restricted-modules ===
As ubuntu's ''linux-restricted-modules'' package includes the fglrx module from an old driver version (8.25.18), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/dapper
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== Problems with module-assistant ====

If module-assistant is unable to build the module you may have to provide a Makefile.cpu file:
<pre>
cd /usr/src
sudo touch kernel-headers-(version)/arch/i386/Makefile.cpu
cd /usr/src/linux
sudo make scripts/
</pre>

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

==== Upgrade from Breezy ====
If method 2 doesn't work first time round, and you have upgraded from a Breezy installation, try this:

Remove previous versions of the fglrx driver:
<pre>
sudo dpkg -r fglrx-control
sudo dpkg -r fglrx-kernel-source
sudo dpkg -r xorg-driver-fglrx
</pre>

dpkg will list dependencies for xorg-driver-fglrx which will need up be removed, for example:

<pre>
sudo dpkg -r fglrx-kernel
sudo dpkg -r fglrx-kernel-2.6.12-10-686-smp
sudo dpkg -r xorg-driver-fglrx
</pre>

Proceed with method 2

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== HP Notebook dv5029us / dv5040us / zv6000 / dv8000 ===

If you have an HP Notebook Computer (or Compaq) such as the HP dv5029us, dv5040us or zv6000 series, it is needed to modify the BIOS configuration. It seems for some reason using sideport memory (the card's onboard memory only) leads to an apparent system crash although the logs show successful initialization of DRI. It is needed to run the BIOS setup screen, go to memory options, and select UMA+Sideport memory and assign a value to it (I assigned an extra 128M from the system RAM). Boot the computer and the fglrx driver will work. FGLRX version is 8.24.8 on an i386 Ubuntu Dapper install.

* Ubuntu FGLRX drivers 8.25.18, do not work properly on the dv5029us (Radeon Xpress 200M) as of this writing (5/30/2006). It is needed to revert to 8.24.8 for this specific computer in order to get proper 3D acceleration, and 2D with no tearing off.

** ATI Driver 8.26.18, does not work with the Radeon Express 200M. Some HP/Compaq laptops only have working 3D support with ONLY UMA video memory( Sideport+UMA won't work ). This is due to a 1 year old flaw in the ATI driver. If you want to use your onboard/Sideport memory, you can only get 2D support by adding [ Option "no_dri" "yes"] to the fglrx driver section of /etc/X11/xorg.conf

* jul-22-2006, marciowb wrote: I have a HP Pavilion zv6000 - a notebook computer with AMD64 - and it have a ATI Radeon Xpress 200M with 128MB of dedicated memory (Sideport) and it accepts to use shared memory (UMA), also. But if I try to use Sideport or Sideport+UMA the 3D acceleration fails and/or my computer hangs. It works fine if I configure its BIOS to use only UMA, including with a good 3D acceleration performance. Configured to use only UMA it works with the ATI Driver 8.26.18 and 8.25.18, but I was unable to do it works the ATI Driver 8.24.8. I tried several times to use 8.24.8 but it doesn't seem to work with 3D acceleration, only 2D. I see the Xorg.log file the fglrx driver fails to load the DRI driver. I used the Kubuntu with the Linux kernel 2.6.15-26-amd64-generic.

* aug-7-2006, mde wrote: I have an HP dv8120ca / dv8000 laptop with a Radeon Xpress 200M. After installing the 8.27.10 driver, no matter what I set the bios to (128 UMA+Sideport or just Sideport, UMA Only is not an option in my bios), I get the black screen/99% cpu usage problem. I have tried to contact ATI to complain about this bug... Their response: "ATI does not provide direct technical support for laptops/notebooks at this current time (telephone or email). If you require direct technical support please contact the system manufacturer of your laptop/notebook.". To contact ati's linux driver feedback team and request they fix the problem, go to [[https://support.ati.com/ics/support/KBAnswer.asp?questionID=1714 https://support.ati.com/ics/support/KBAnswer.asp?questionID=1714]]. I have written a template letter you can use for your submission should you so desire. It is available at [[http://www.rhthm.com/ati/index.html http://www.rhthm.com/ati/index.html]].

=== HP zt3000 / Compaq nx7000 ===
Beginning with ATI driver version 8.19, the drivers fail to properly detect modelines that are compatible with the LCD screen of the HP zt3000 (and equivalent Compaq nx7000 model), and they must be inserted into xorg.conf manually. For the 1680x1050 LCD screen, inserting the following modelines into the "Monitor" section works:
Modeline "640x350" 119.12 640 1728 1760 1840 350 1052 1058 1080
Modeline "640x400" 119.12 640 1728 1760 1840 400 1052 1058 1080
Modeline "720x400" 119.12 720 1728 1760 1840 400 1052 1058 1080
Modeline "640x480" 119.12 640 1728 1760 1840 480 1052 1058 1080
Modeline "800x600" 119.12 800 1728 1760 1840 600 1052 1058 1080
Modeline "1024x768" 119.12 1024 1728 1760 1840 768 1052 1058 1080
Modeline "1152x864" 119.12 1152 1728 1760 1840 864 1052 1058 1080
Modeline "1280x960" 119.12 1280 1728 1760 1840 960 1052 1058 1080
Modeline "1280x1024" 119.12 1280 1728 1760 1840 1024 1052 1058 1080
Modeline "832x624" 119.12 832 1728 1760 1840 624 1052 1058 1080
Modeline "1280x768" 119.12 1280 1728 1760 1840 768 1052 1058 1080
Modeline "1280x800" 119.12 1280 1728 1760 1840 800 1052 1058 1080
Modeline "1152x768" 119.12 1152 1728 1760 1840 768 1052 1058 1080
Modeline "1400x1050" 119.12 1400 1728 1760 1840 1050 1052 1058 1080
Modeline "1440x900" 119.12 1440 1728 1760 1840 900 1052 1058 1080
Modeline "1600x1024" 119.12 1600 1728 1760 1840 1024 1052 1058 1080
Modeline "1680x1050" 119.12 1680 1728 1760 1840 1050 1052 1058 1080

If you have the "1920x1200" version of the HP zt3000 the Modeline is:
Modeline "1920x1200" 150.75 1920 2016 2048 2185 1200 1202 1208 1235

If you have the "1280x800" version of the HP zt3000 the Modeline should be:
ModeLine "1280x800" 69.8 1280 1336 1368 1440 800 802 808 823 -hsync -vsync

If you have the compaq nx7010 with 1280x800 screen then the following modeline should work:
Modeline "1280x800" 70.875 1280 1320 1352 1456 800 801 804 820 +hsync +vsync
This was determined using powerstrip in windows.

When using a Compaq NX7010 (Radeon R250Lf Mobility M9) with 1650x1050 screen, powerstrip gives the following working params (CApiTAlisation important), just use one single ModeLine:
ModeLine "1650x1050" 121.500 1680 1712 1800 1872 1050 1051 1054 1065 +Hsync +Vsync
On the Compaq NX7010, be sure to copy the 8.24.8 libGL.so.1.2 as in Troubleshooting for Method 1 above.

''Note: This line will also work on the Compaq X1000 series''

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-03T23:01:36Z

84.160.139.197: /* blacklist old fglrx module from linux-restricted-modules */

== Big Fat Warning ==

=== Read this before doing anything else! ===
This is '''NOT''' a tested guide for Ubuntu Edgy. It is just a modified copy of the Dapper-Guide. Maybe it works for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== Blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-03T22:57:21Z

84.160.139.197: Disable Composite

== Big Fat Warning ==

=== Read this before doing anything else! ===
This is '''NOT''' a tested guide for Ubuntu Edgy. It is just a modified copy of the Dapper-Guide. Maybe it works for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Disable Composite Extension ===

In Ubuntu Edgy the Composite extension is enabled by default. However, ''fglrx'' does not yet support Composite with DRI. Therefore you have to disable Composite. To do so edit the ''xorg.conf'' file:
<pre>sudo gedit /etc/X11/xorg.conf</pre>
and add these lines at the end of the file:
{{Box File|/etc/X11/xorg.conf|
<pre>Section "Extensions"
Option "Composite" "0"
EndSection</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Edgy Installation Guide

2006-09-02T18:47:04Z

84.160.133.107: the installer is already executed with "bash"

== Big Fat Warning ==

=== Read this before doing anything else! ===
This is '''NOT''' a tested guide for Ubuntu Edgy. It is just a modified copy of the Dapper-Guide. Maybe it works for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu Breezy Installation Guide

2006-09-01T11:30:45Z

84.160.139.61: 8.28.8

== Method 1: Installing Breezy's Included Driver (8.16.20) ==

The fglrx driver supports Radeon 8500+ and the X-series cards (see [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/linux_8.16.20.html#173867 release notes]). When running the dpkg-reconfigure commands you can accept the defaults whenever you aren't sure.

=== Installing the driver ===

''All Platforms:''
<pre>
sudo apt-get install xorg-driver-fglrx
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo dpkg-reconfigure xserver-xorg #Select the fglrx driver and 64-bit users should deselect int10a
</pre>

''64-bit users:''

You have to downgrade to an older version of libdri.a due to an incompatilbity with the ATI drivers. [http://mail3.mpr.org/mlomker/libdri.a.gz Download it here]

Change to download directory:
<pre>
gunzip libdri.a.gz
sudo cp /usr/X11R6/lib/modules/extensions/libdri.a libdri.a.old
sudo cp libdri.a /usr/X11R6/lib/modules/extensions/
</pre>

If you wish to revert to any non-fglrx driver you will need to copy the libdri.a.old file back over the fglrx version.

''All platforms:'' Ctrl-Alt-Backspace to restart your desktop.

=== Confirm that it works ===
<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 1.3.5272 (X4.3.0-8.16.20)
</pre>

=== Troubleshooting ===

If you have a widescreen LCD display that is stuck at 1024x768 then it is probably the bug in the 8.16.20 driver that was fixed in 8.18.X (see the next section).

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

== Method 2: Generating/Installing Ubuntu packages for the newer 8.28.8 drivers in Breezy Badger ==

'''Important Warning:''' Installation of this driver requires removing the restricted-modules package in order to work. That package includes drivers for madwifi (Atheros wireless cards), nvidia cards, and a handful of other devices. I provide a work-around for the madwifi drivers, but you need to perform it before removing the restricted modules (jump to end of this this post).

When running the dpkg-reconfigure command you should answer the questions that you know and take the defaults for the rest. You might want to say ''no'' to the monitor detection--it has caused X-Windows to crash for some people.

=== Remove existing fglrx driver ===

Remove Breezy's included drivers if they are installed:

<pre>
sudo apt-get remove xorg-driver-fglrx
sudo apt-get remove fglrx-control
sudo apt-get remove linux-restricted-modules-$(uname -r)
sudo dpkg-reconfigure xserver-xorg #select the "ati" module
</pre>

Reboot.

*Note 1: If after reboot, your system hangs at a black screen before taking you to a graphical login - reboot to 'recovery mode' and edit /etc/X11/xorg.conf to use 'vesa' instead of 'ati'. Then continue with the steps below.

*Note 2: You can change your xorg.conf file to Option "vesa" BEFORE rebooting, so after rebooting you can have usable X (and skip Note 1). Remember that you HAVE to reboot (just restarting X will leave you with unusable X).

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps. [http://mail3.mpr.org/mlomker/sources.list Sample sources.list].

''Install necessary tools:''

<pre>
sudo apt-get install gcc-3.4 module-assistant build-essential fakeroot dh-make debconf libstdc++5 gcc-3.3-base
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/breezy
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx deb's from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel driver:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant a-i fglrx
</pre>

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Reboot.

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

(''renderer string'' depends on your hardware and may/will be different)

=== Troubleshooting ===

==== General ====

Look for error messages in /var/log/Xorg.0.log and kern.log.
If you receive the '''(EE) No devices detected''' error message, it is highly possible that you own a Radeon from the 7000-7500 series with the R100 chip, which the proprietary Linux drivers don't support.

==== Madwifi Drivers in Breezy Badger ====
In order to continue using the [http://madwifi.org madwifi] driver you can do the following '''before''' removing the linux-restricted-modules package and rebooting.
<pre>
sudo cp /lib/modules/$(uname -r)/volatile/ath_hal.ko /lib/modules/$(uname -r)/kernel/
sudo depmod -a $(uname -r)
</pre>

[[Category:Installation Documentation]]

Talk:Ubuntu Dapper Installation Guide

2006-09-01T00:17:05Z

84.160.139.61: spam removed

Wow, I followed this and it doesn't work, either method......

Now what? nobody to turn to, no more help available. Is it an ATI problem or a Dapper one?

I would have never believed that as "advanced" as this O/S is that it is this difficult to get a display driver to work.

This is absolutely incredible....

the problem is the driver, not the operating system.. ATI should take a lesson from nVidia.

[UBfusion reporting]: Many ATI chipsets suffer from this, due to faulty libGl.so.1.2 in the new ATI drivers - use the old file from old drivers, read http://ubuntuforums.org/showthread.php?t=185033

== try using ONLY 128MB of UMA memory instead of Sideport+UMA ==

This is a really strange problem with the HP/Compaq R4000/zv6000:

Once upon a time, ATI driver fglrx_6_8_0-8.13.4-1.i386.rpm provided full DRI and 3D support on Ubuntu 5.04 kernel 2.6.10.
( wget http://www2.ati.com/drivers/linux/fglrx_6_8_0-8.13.4-1.i386.rpm )

Then, ATI's new releases only worked if we used 128MB of shared/system/UMA memory along with the 128MB of onboard video
memory many of these laptop models have.

Now, after installing Ubuntu 6.0.6 kernel 2.6.15, the ATI driver will only work with full DRI and 3D support if I
totally disable the 128MB of onboard video memory and use ONLY shared/system/UMA memory( 128MB )....

Now, with my fully functioning Ubuntu 5.0.4 installation, when I go from only Sideport to only UMA, the glxgears
output goes from ~1200fps to ~500fps

With the new kernel and Xorg server of Ubuntu 6.0.6 running only UMA video memory and the 5.0.4 version of glxgears,
output from that program is ~800fps. Still a 30% decrease in performance from using the 128MB of onboard/Sideport
video memory.

IMO, running like this is not a fix but a crippled hack and it would be really nice if HP/Compaq or ATI would tell us
what the problem is, why it exists, how it is to be fixed. So try just 128M of UMA in your BIOS and see if that enables
you to get DRI/Direct Rendering working with the ATI/fglrx driver.

OK - I noticed that the wiki had been updated to reflect the 8.26.18 release but the line relating to the Xpress 200M card not functioning with the 8.25.18 drivers was unchanged. Can someone confirm if the 8.26.18 drivers work with the 200M card or not?

*I just tried it with the 8.28.8 drivers and while it does run with Sideport and UMA on it doesn't run well, including drawing errors and freezes shortly after logging in.

== almost work in Compaq nx7010 ==

Hi,

I tryied everything I found with this $#%&"@ ati video card and, after 3 days of little sleeping and several distros & reinstallations, the closest to a working configuration I got was with Ubuntu dapper and method 1 in your guide (including HP zt3000 / Compaq nx7000 troubleshooting). Logically it seems to work (fglrxinfo reports OpenGL vendor string: ATI Technologies Inc., etc.) but phisically it doesn't (see the picture at [http://www.tirata.com/nx7010/nx7010.jpg]). Image is barely usable (loggin in that way I was able to run fglrxinfo), it covers 60% of the screen horizontally and flickers a lot.

Any ideas how to fix it?

[[Image:http://www.tirata.com/nx7010/nx7010.jpg]]

Mhhh could you post please your xorg.conf file in order to double check it? You could add the following too: max resolution (seems to be 1280 x 800 TFT), GPU Model (seems to be an ATI Radeon Mobility 9200, issue a lspci -v to know exactly the chipset type). With that info in hand __perhaps__ something can be done, some log files would be appreciated too.

As you describe it could be a problem with the Modelines configuration in xorg driving the TFT display out of sync. Try a lower resolution (say 1024x768, 800x600, 640x480); if it doesn't work try defining a manual modeline for the resolution you are trying. Good luck and keep posting! :-)

== nx7000 problem ==

I have a strange problem with the ModeLine. It works when i use the ModeLine for the nx7010, but only the default resolution of 1680x1050. When i choose a lower resolution for example 1024x768 the screen is not useable. Can somebody help me? I have testet some ModeLine generaters, but nothing works.

Ubuntu

2006-08-31T16:09:21Z

84.160.139.61: /* Related Resources */

== General Status ==
* Included with Distribution
* Native Installer Support contributed by Aric Cyr

== Installation ==
*[[Ubuntu_Breezy_Installation_Guide|Breezy (5.10) Installation Guide]]
*[[Ubuntu_Dapper_Installation_Guide|Dapper (6.06) Installation Guide]]
*[[Ubuntu_Edgy_Installation_Guide|Edgy (6.10) Installation Guide]] '''(Warning: untested guide!)'''

== Tips and Tricks ==
* To build your own .deb packages for Ubuntu you will need to install at least the following packages from the apt repositories:
** build-essential
** module-assistant
** fakeroot
** dh-make
** debconf

* If you want to use a newer version of the driver than the one which comes with your distribution and you have ''linux-restricted-modules'' installed, you have to disable the fglrx kernel module from ''linux-restricted-modules'' because it will invariably get in the way of your more recent drivers. Detailed information on how to achieve this can be found in the distribution-specific guides.

* You can configure the driver with the '''aticonfig''' tool, more information can be found at [[Configuring]].

== Related Resources ==
* Ubuntuforums.org Video forum: [http://ubuntuforums.org/forumdisplay.php?f=114 Breezy], [http://ubuntuforums.org/forumdisplay.php?f=138 Dapper]

{{VCT}}

[[Category:Distributions]]

Ubuntu Edgy Installation Guide

2006-08-31T15:53:36Z

84.160.139.61:

== Big Fat Warning ==

=== Read this before doing anything else! ===
This is '''NOT''' a tested guide for Ubuntu Edgy. It is just a modified copy of the Dapper-Guide. Maybe it works for you, maybe it will make your system unusable. If you are using Edgy and you really ''know'' that some parts of this guide have to be modified to make the install work in Edgy, please change them accordingly.

On the other side, if you can confirm that this guide (this means both methods) works on an a default Edgy installation without causing any trouble, you may remove remove this warning.

== Method 1: Installing Edgy's Included Driver ==

=== Installing the driver ===

Make sure the ''restricted'' repository is enabled in ''/etc/apt/sources.list'' or this guide will not work!

<pre>
sudo apt-get update
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo apt-get install xorg-driver-fglrx
sudo depmod -a
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

Now Reboot your system:

<pre>
sudo shutdown -r now
</pre>

An '''alternative''' to the '''aticonfig --initial''' command is to edit ''/etc/X11/xorg.conf'' and replace the string "ati" with "fglrx" in the "Device" section. This way you won't lose your old "Screen" and "Monitor" settings. Afterwards you can use aticonfig for setting overlay etc.

=== Confirm that it works ===
<pre>
fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 Generic
OpenGL version string: 2.0.5814 (8.25.18)
</pre>

=== Troubleshooting for Method 1 ===

*The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors. You should really include this when you are asking for help somewhere.

*If you used Method 2 before, you have to unblacklist fglrx again by editing ''/etc/default/linux-restricted-modules-common''

*See [[#Troubleshooting for both Methods|Troubleshooting for both Methods]]

 

== Method 2: Generating/Installing Ubuntu packages for the 8.28.8 drivers in Ubuntu Edgy Manually ==

=== blacklist old fglrx module from linux-restricted-modules ===
We have to blacklist the fglrx module from ''linux-restricted-modules'' to make sure the new kernel module (which will be created during install) will be used instead.

<pre>sudo gedit /etc/default/linux-restricted-modules-common</pre>
Edit ''DISABLED_MODULES'' to include fglrx
{{Box File|/etc/default/linux-restricted-modules-common|
<pre>DISABLED_MODULES="fglrx"</pre>
}}

=== Installing the new driver ===

Download the ATI driver installer: [http://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/ati-driver-installer-8.28.8.run ati-driver-installer-8.28.8.run] (this installer is for 32bit '''and''' 64bit systems)

This guide refers to the 32bit version of the driver. The installation procedure for 64bit should be the same as for 32bit, except some filenames will differ slightly.

Change to the download directory. Make sure that you have the ''universe'' and ''multiverse'' repositories enabled in ''/etc/apt/sources.list'' before doing these steps.

''Install necessary tools:''

<pre>
sudo apt-get update
sudo apt-get install module-assistant build-essential
sudo apt-get install fakeroot dh-make debconf libstdc++5 linux-headers-$(uname -r)
</pre>

''Create .deb packages:''

<pre>
bash ati-driver-installer-8.28.8.run --buildpkg Ubuntu/edgy
</pre>

''Install .deb packages:''

<pre>
sudo dpkg -i xorg-driver-fglrx_8.28.8-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.28.8-1_i386.deb
sudo dpkg -i fglrx-control_8.28.8-1_i386.deb
</pre>

''Remove any old fglrx debs from /usr/src/:''

<pre>
sudo rm /usr/src/fglrx-kernel*.deb
</pre>

''Compile the kernel module:''

<pre>
sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant build fglrx
sudo module-assistant install fglrx
sudo depmod -a
</pre>

'''Note''': You have to recompile the kernel module after each kernel update!

''Update the xorg.conf file:''

<pre>
sudo aticonfig --initial
sudo aticonfig --overlay-type=Xv
</pre>

''Reboot:''

<pre>
sudo shutdown -r now
</pre>

=== Confirm that it worked ===

<pre>
$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.6011 (8.28.8)
</pre>

=== Troubleshooting for Method 2===

==== xorg.conf ====

The '''aticonfig --initial''' command will not update the xorg.conf file if it already has a "fglrx" Device section.
However, you may force aticonfig to generate default Monitor, Device, and Screen sections with the following command:

<pre>
sudo aticonfig --force --initial
</pre>

 

== Troubleshooting for both Methods ==

=== General ===

The output of '''dmesg | grep fglrx''' and /var/log/Xorg.0.log are most useful when looking for errors.

=== 2D speed ===

If you suffer from slow 2D speed it might help to set
Option "XaaNoOffscreenPixmaps"
in the fglrx section of ''/etc/X11/xorg.conf''

=== Is the rebooting really necessary? ===

No.

However, rebooting is the easiest method to ensure that the kernel module(s) from the old driver are unloaded and the fglrx module is loaded instead. If you don't want to reboot for some reason, you may manually shut down Xorg, unload any old "drm", "radeon" or "fglrx" modules and then start Xorg again.

=== Revert to Xorg driver ===

If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing
<pre>sudo dpkg-reconfigure xserver-xorg</pre>
and selecting the "ati" driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup.

You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:

<pre>sudo apt-get install --reinstall libgl1-mesa</pre>

Ubuntu

2006-08-31T15:50:13Z

84.160.139.61: comma removed ;)

== General Status ==
* Included with Distribution
* Native Installer Support contributed by Aric Cyr

== Installation ==
*[[Ubuntu_Breezy_Installation_Guide|Breezy (5.10) Installation Guide]]
*[[Ubuntu_Dapper_Installation_Guide|Dapper (6.06) Installation Guide]]
*[[Ubuntu_Edgy_Installation_Guide|Edgy (6.10) Installation Guide]] '''(Warning: untested guide!)'''

== Tips and Tricks ==
* To build your own .deb packages for Ubuntu you will need to install at least the following packages from the apt repositories:
** build-essential
** module-assistant
** fakeroot
** dh-make
** debconf

* If you want to use a newer version of the driver than the one which comes with your distribution and you have ''linux-restricted-modules'' installed, you have to disable the fglrx kernel module from ''linux-restricted-modules'' because it will invariably get in the way of your more recent drivers. Detailed information on how to achieve this can be found in the distribution-specific guides.

* You can configure the driver with the '''aticonfig''' tool, more information can be found at [[Configuring]].

== Related Resources ==
* [http://ubuntuforums.org/forumdisplay.php?f=114 Ubuntuforums.org Video forum]

{{VCT}}

[[Category:Distributions]]

Ubuntu

2006-08-31T15:49:08Z

84.160.139.61: /* Tips and Tricks */ breezy specific information should only be in the breezy guide

== General Status ==
* Included with Distribution
* Native Installer Support contributed by Aric Cyr

== Installation ==
*[[Ubuntu_Breezy_Installation_Guide|Breezy (5.10) Installation Guide]]
*[[Ubuntu_Dapper_Installation_Guide|Dapper (6.06) Installation Guide]]
*[[Ubuntu_Edgy_Installation_Guide|Edgy (6.10) Installation Guide]] '''(Warning: untested guide!)'''

== Tips and Tricks ==
* To build your own .deb packages for Ubuntu you will need to install at least the following packages from the apt repositories:
** build-essential
** module-assistant
** fakeroot
** dh-make
** debconf

* If you want to use a newer version of the driver than the one which comes with your distribution, and you have ''linux-restricted-modules'' installed, you have to disable the fglrx kernel module from ''linux-restricted-modules'' because it will invariably get in the way of your more recent drivers. Detailed information on how to achieve this can be found in the distribution-specific guides.

* You can configure the driver with the '''aticonfig''' tool, more information can be found at [[Configuring]].

== Related Resources ==
* [http://ubuntuforums.org/forumdisplay.php?f=114 Ubuntuforums.org Video forum]

{{VCT}}

[[Category:Distributions]]