<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en">
	<id>http://wiki.cchtml.com/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=85.18.0.0%2F16</id>
	<title>cchtml.com - User contributions [en]</title>
	<link rel="self" type="application/atom+xml" href="http://wiki.cchtml.com/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=85.18.0.0%2F16"/>
	<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Special:Contributions/85.18.0.0/16"/>
	<updated>2026-11-18T16:57:49Z</updated>
	<subtitle>User contributions</subtitle>
	<generator>MediaWiki 1.46.2</generator>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Ubuntu_Hardy_Installation_Guide&amp;diff=5008</id>
		<title>Ubuntu Hardy Installation Guide</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Ubuntu_Hardy_Installation_Guide&amp;diff=5008"/>
		<updated>2008-11-06T16:38:56Z</updated>

		<summary type="html">&lt;p&gt;85.18.14.45: /* 5. Install .debs. */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;For most users it won&#039;t be necessary to go into installation and configuration details of the driver. Ubuntu 8.04 (Hardy) provides a notification saying that there are restricted drivers available. You just have to go there (Restricted Drivers Manager) and enable the &amp;quot;ATI accelerated graphics driver&amp;quot;. Ubuntu will then install and configure the driver for you. If this does not provide the optimal solution you were looking for, please read ahead.&lt;br /&gt;
&lt;br /&gt;
After installation, in GNOME or Kubuntu, &#039;&#039;&#039;turn off visual effects&#039;&#039;&#039; or you will notice a flicker in OpenGL.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Method 1: Install the driver the Ubuntu Way ==&lt;br /&gt;
&lt;br /&gt;
This will install the current driver in Ubuntu&#039;s repository. It is older than the one AMD has released, but will be supported by the Ubuntu people. Catalyst 8.3 is in the repositories.&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo apt-get update&lt;br /&gt;
&lt;br /&gt;
$ sudo apt-get install linux-restricted-modules-generic restricted-manager&lt;br /&gt;
&lt;br /&gt;
$ sudo apt-get install xorg-driver-fglrx&lt;br /&gt;
&lt;br /&gt;
$ sudo depmod -a&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
The second line may not be necessary as you may already have restricted modules installed. Run it just in case. If the third line fails, you probably don&#039;t have the restricted repository enabled. See Pre-Installation.&lt;br /&gt;
&lt;br /&gt;
After this, you may need to edit Xorg.conf:&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo gedit /etc/X11/xorg.conf&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
In the device section, if it is not already there add:&lt;br /&gt;
&lt;br /&gt;
{{Box File|/etc/X11/xorg.conf|&lt;br /&gt;
Driver     &amp;quot;fglrx&amp;quot;&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Then to make sure Xorg is set up correctly, you&#039;ll have to let aticonfig &amp;quot;initialize&amp;quot; it:&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo aticonfig --initial -f&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
After this you should be able to restart your computer and have the driver working. To test type&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ fglrxinfo&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
into a terminal. If the vendor string is not ATI, but Mesa, check [[#Removing Mesa drivers]]&lt;br /&gt;
&lt;br /&gt;
==== Post-Installation Tweaks ====&lt;br /&gt;
To enable hardware accelerated video on pre-R500 cards, edit &#039;&#039;&#039;/etc/X11/xorg.conf&#039;&#039;&#039; to include the following lines without &#039;&#039;&#039;[...]&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
{{Box File|/etc/X11/xorg.conf|&lt;br /&gt;
Section &amp;quot;Device&amp;quot;&lt;br /&gt;
:[...]&amp;lt;br /&amp;gt;&lt;br /&gt;
:Driver		&amp;quot;fglrx&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:Option		&amp;quot;VideoOverlay&amp;quot;	&amp;quot;on&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:Option		&amp;quot;OpenGLOverlay&amp;quot;	&amp;quot;off&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:[...]&amp;lt;br /&amp;gt;&lt;br /&gt;
EndSection&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Note that when Visual Effects (Compiz) are active, flickering and artifacts may occur in OpenGL applications and hardware accelerated video windows (particularly with R300 chipset).  To prevent this, disable Visual Effects.&lt;br /&gt;
&lt;br /&gt;
On newer cards the options below enables Visual Effects and video to be played without flicker. The Textured video option can be turned on, but this can cause flicker or diagonal artifacts when playing videos.&lt;br /&gt;
&lt;br /&gt;
{{Box File|/etc/X11/xorg.conf|&lt;br /&gt;
Section &amp;quot;Device&amp;quot;&lt;br /&gt;
:[...]&amp;lt;br /&amp;gt;&lt;br /&gt;
:Driver	&amp;quot;fglrx&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:Option	&amp;quot;VideoOverlay&amp;quot;	&amp;quot;off&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:Option	&amp;quot;OpenGLOverlay&amp;quot;	&amp;quot;on&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:Option &amp;quot;TexturedVideo&amp;quot; &amp;quot;off&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:[...]&amp;lt;br /&amp;gt;&lt;br /&gt;
EndSection&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
== Method 2: Manual Install Method ==&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;If you are using the x86_64 architecture (64 bit), be sure to inst &amp;quot;ia32-libs&amp;quot; before proceeding!&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Make sure &#039;&#039;universe&#039;&#039; and &#039;&#039;multiverse&#039;&#039; are enabled in your repository sources.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;1. Install necessary build tools.&#039;&#039;===&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo apt-get update&amp;lt;br /&amp;gt;&lt;br /&gt;
$ sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++5 dkms linux-headers-$(uname -r)&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;2. Download the latest Catalyst package.&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Download page: Catalyst {{catalystversion}}. This package contains both the 32-bit and 64-bit driver.&lt;br /&gt;
&lt;br /&gt;
Open a terminal window and switch to the directory you downloaded the installer to. &lt;br /&gt;
For example:&amp;lt;pre&amp;gt;cd Desktop&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;3. Create .deb packages.&#039;&#039;===&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sh {{catalystfilename}} --buildpkg Ubuntu/hardy&lt;br /&gt;
}}&lt;br /&gt;
(&amp;quot;hardy&amp;quot; is not a typo)&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;4. Add driver to kernel module blacklist.&#039;&#039;===&lt;br /&gt;
&#039;&#039;&#039;NOTE&#039;&#039;&#039;: This step is no more necessary with fglrx 8-10. Just jump to step 5 in that case.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
The ATI driver must be added to the kernel module blacklist so that the new ATI driver will be used. If it is not blacklisted, the official Ubuntu repository version of the ATI driver will be loaded instead.&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo gedit /etc/default/linux-restricted-modules-common&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Add &amp;quot;fglrx&amp;quot; to the line &amp;quot;DISABLED_MODULES&amp;quot;&lt;br /&gt;
{{Box File|/etc/default/linux-restricted-modules-common|&lt;br /&gt;
&amp;lt;pre&amp;gt;DISABLED_MODULES=&amp;quot;fglrx&amp;quot;&amp;lt;/pre&amp;gt;&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Please note that after the modification above, the &amp;quot;Restricted Driver Manager&amp;quot; will signal &amp;quot;ATI accelerated graphics driver&amp;quot; not enabled (unticked). This is perfectly correct. At the end of the installation procedure it will signal in Status: &amp;quot;in use&amp;quot; (green light), but NOT enabled. It simply means that the fglrx module contained in the linux-restricted-modules package is not enabled, but another fglrx module ({{catalystversion}}) is in use.&lt;br /&gt;
&lt;br /&gt;
You may also need to edit the file(s) (if they exist):&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo gedit /etc/modprobe.d/blacklist-restricted&lt;br /&gt;
$ sudo gedit /etc/modprobe.d/blacklist-local&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Put a # in front of the line &amp;quot;blacklist fglrx&amp;quot;, if it is present. Otherwise, the kernel module will not load automatically, and you will not get 3D acceleration.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;5. Install .debs.&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;For 32 Bits&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo dpkg -i xorg-driver-fglrx_8.542-0ubuntu1_i386.deb fglrx-kernel-source_8.542-0ubuntu1_i386.deb fglrx-amdcccle_8.542-0ubuntu1_i386.deb&lt;br /&gt;
}}&lt;br /&gt;
&#039;&#039;Using [http://en.wikipedia.org/wiki/Command_line_completion tab completion] can make this command easier.&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Starting from 8-10 version of the driver, installing the following package ensures compatibility with restricted drivers&#039; manager:&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo dpkg -i fglrx-modaliases_8.542-0ubuntu1_i386.deb&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
64 bit systems should have the same behaviour.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;For 64 Bits&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo dpkg -i xorg-driver-fglrx_8.542-0ubuntu1_amd64.deb fglrx-kernel-source_8.542-0ubuntu1_amd64.deb fglrx-amdcccle_8.542-0ubuntu1_amd64.deb&lt;br /&gt;
}}&lt;br /&gt;
&#039;&#039;Using [http://en.wikipedia.org/wiki/Command_line_completion tab completion] can make this command easier.&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
=== Additional 64-bit instructions ===&lt;br /&gt;
&lt;br /&gt;
If you have a 64 bit install, the above dpkg command may complain that &amp;quot;Errors were encountered while processing: fglrx-amdcccle&amp;quot;.  This is because of a dependency of the amdccle package on 32 bit libraries.  If you receive this error, issue the following command after the above dpkg command, which will force the installation of all of the 32 bit dependencies, and then the amdccle package:&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo apt-get install -f&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Catalyst {{catalystversion}} on 64-bit systems requires the &#039;&#039;--force-overwrite&#039;&#039; command in the above &#039;&#039;dpkg&#039;&#039; command:&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo dpkg -i --force-overwrite xorg-driver-fglrx_8.522*.deb fglrx-kernel-source_8.522-0*.deb fglrx-amdcccle_8.522-0*.deb&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
When installing the packages, if &amp;lt;tt&amp;gt;xorg-driver-fglrx_8.522&amp;lt;/tt&amp;gt; fails to install due to a diverted file conflict, you can [http://emmetcaulfield.net/Tech/ATIv84+Hardy/ fix the package with this procedure].&lt;br /&gt;
&lt;br /&gt;
===Fix for an error:===&lt;br /&gt;
If you are having this error:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
dpkg-shlibdeps: failure: couldn&#039;t find library libfglrx_gamma.so.1 needed by debian/xorg-driver-fglrx/usr/bin/fglrx_xgamma (its RPATH is &#039;&#039;).&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Fix it by doing the following:&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo sh ati-driver-installer-8-7-x86.x86_64.run --extract driver&lt;br /&gt;
$ cd driver/arch/x86_64/usr/X11R6/lib64&lt;br /&gt;
$ sudo ln -s libfglrx_gamma.so.1.0 libfglrx_gamma.so.1&lt;br /&gt;
$ cd ../../../../../&lt;br /&gt;
$ sudo sh ati-installer.sh -- --buildpkg Ubuntu/hardy&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
=== Finishing the Install: Configuration ===&lt;br /&gt;
&lt;br /&gt;
If you&#039;ve used fglrx previously, you will not need to do this.&lt;br /&gt;
&lt;br /&gt;
Now you&#039;ll have to edit your xorg.conf&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo gedit /etc/X11/xorg.conf&amp;lt;/pre&amp;gt;&lt;br /&gt;
and add the following line to the Device section (if it does not already exist).  Include the following lines without &#039;&#039;&#039;[...]&#039;&#039;&#039;: &lt;br /&gt;
&amp;lt;pre&amp;gt;Section &amp;quot;Device&amp;quot;&lt;br /&gt;
	[...]&lt;br /&gt;
	Driver		&amp;quot;fglrx&amp;quot;&lt;br /&gt;
	[...]&lt;br /&gt;
EndSection&amp;lt;/pre&amp;gt;&lt;br /&gt;
Save and exit, then run&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo aticonfig --initial -f&amp;lt;/pre&amp;gt;&lt;br /&gt;
in a terminal. If it does not error you should be fine. &lt;br /&gt;
&lt;br /&gt;
Some people find that changes to xorg.conf don&#039;t get used by the driver. To force the ati driver to adopt changes made to xorg.conf, type the following command:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo aticonfig --input=/etc/X11/xorg.conf --tls=1&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
Finally, reboot the computer and type&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
fglrxinfo&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
into the terminal. If the vendor string contains ATI, you have installed the driver successfully. Release 8.8 looks like:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
display: :0.0  screen: 0&lt;br /&gt;
OpenGL vendor string: ATI Technologies Inc.&lt;br /&gt;
OpenGL renderer string: Radeon X1950 Series&lt;br /&gt;
OpenGL version string: 2.1.7873 Release&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Please note: Depending on the particular ATI card that you own, you may or may not automatically have all of the relevant driver features enabled.  R500 and R600 cards (X1xxx, HD series, and newer) in particular will need TexturedVideo enabled in Xorg.conf (rather than the traditional VideoOverlay) in order to support Xv accelerated video playback.&lt;br /&gt;
&lt;br /&gt;
=== Removing Mesa drivers ===&lt;br /&gt;
If fglrxinfo reports that Indirect rendering by Mesa is in place, even though you have installed ATI driver, check:&lt;br /&gt;
&lt;br /&gt;
*Remove the package xserver-xgl.&lt;br /&gt;
:&amp;lt;pre&amp;gt;sudo apt-get remove xserver-xgl&amp;lt;/pre&amp;gt;&lt;br /&gt;
:&#039;&#039;&#039;Explanation:&#039;&#039;&#039; If you installed this previously in order to make compiz work, it will not allow direct rendering on your display. You can check out if this is what it causing the problem by running&lt;br /&gt;
:&amp;lt;pre&amp;gt;DISPLAY=:0 glxinfo | grep render&amp;lt;/pre&amp;gt;&lt;br /&gt;
:If it returns an ATI renderer, it means that xgl is being displayed indirectly on the display 1. (Taken from [http://ubuntuforums.org/showthread.php?t=740287])&lt;br /&gt;
&lt;br /&gt;
:&#039;&#039;&#039;Warning:&#039;&#039;&#039; This might make your compiz stop working as it is configured to use XGL. A solution might be to run the Envy script in order to configure compiz.  Or, if Compiz stopped working due to &amp;quot;Composite&amp;quot; problem, check that the following is set in the /etc/X11/xorg.conf&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
Section &amp;quot;Extensions&amp;quot;&lt;br /&gt;
	Option		&amp;quot;Composite&amp;quot;	&amp;quot;Enable&amp;quot;&lt;br /&gt;
EndSection&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
*Check for AGP and DRI errors in /var/log/Xorg.0.log like these are: &lt;br /&gt;
:&amp;lt;i&amp;gt;(EE) fglrx(0): [agp] unable to acquire AGP, error -1023&lt;br /&gt;
:(EE) fglrx(0): cannot init AGP&lt;br /&gt;
:(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.&lt;br /&gt;
:(WW) fglrx(0): * DRI initialization failed!                  *&amp;lt;/i&amp;gt;&lt;br /&gt;
&lt;br /&gt;
:If you have Intel 8285P and E7205 chipsets and AGP not detected then you have to remove the i82875p_edac module and restart a some others: &lt;br /&gt;
&amp;lt;pre&amp;gt;rmmod i82875p_edac&lt;br /&gt;
rmmod fglrx&lt;br /&gt;
rmmod intel-agp&lt;br /&gt;
rmmod agpgart&lt;br /&gt;
modprobe agpgart&lt;br /&gt;
modprobe intel-agp&lt;br /&gt;
modprobe fglrx&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
:Blacklist the modules e7xxx_edac so it doesn&#039;t start up again when booting - add the following line at the beginning of /etc/modprobe.d/blacklist:&lt;br /&gt;
:&amp;lt;pre&amp;gt;blacklist i82875p_edac&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
:This has been known to fix issues with -Mesa -AGP -DRI -Google earth and -suspend to RAM (s2ram).&lt;br /&gt;
 &lt;br /&gt;
:&#039;&#039;&#039;Explanation:&#039;&#039;&#039; http://openwetware.org/wiki/Computing/Linux/Ubuntu&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
*Check you are running the correct kernel. &lt;br /&gt;
:&#039;&#039;&#039;Explanation:&#039;&#039;&#039; If you&#039;re upgrading from Gutsy to Hardy in some instances the Grub bootloader does not get updated and the new kernel is not loaded.&lt;br /&gt;
:Run in a terminal:&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ uname -r&lt;br /&gt;
}}&lt;br /&gt;
:If the output starts with 2.6.22 or below you are not using the current kernel and the Ati drivers will not load properly.&lt;br /&gt;
&lt;br /&gt;
If this doesn&#039;t help, try [[Ubuntu Gutsy Installation Guide#Verifying]], or other links: [http://wiki.cchtml.com/index.php/Troubleshooting#No_3D_acceleration], [http://www.thinkwiki.org/wiki/Problems_with_fglrx#Perpetual_Mesa_GLX_Indirect_on_Debian], [http://ubuntuforums.org/archive/index.php/t-475699.html].&lt;br /&gt;
&lt;br /&gt;
== Specific Issues ==&lt;br /&gt;
&lt;br /&gt;
=== Hang at logout ===&lt;br /&gt;
&lt;br /&gt;
If you experience hangs when logging out (of X) it is probably due to the /etc/ati/authatieventsd.sh script looking for X authorisation files in the wrong place when it starts up. You can kill the hanging authatieventsd.sh processes from a console tty to allow the shutdown of the X server. This can be fixed permanently with:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo mkdir -p /var/lib/xdm/authdir&lt;br /&gt;
sudo ln -s /var/run/xauth /var/lib/xdm/authdir/authfiles&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
If that doesn&#039;t work then you can disable atieventsd with this command:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo /usr/sbin/update-rc.d -f atieventsd remove&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== Suspend/Hibernation ===&lt;br /&gt;
&lt;br /&gt;
Suspend hibernation &#039;&#039;&#039;works&#039;&#039;&#039; with the latest driver.&lt;br /&gt;
&lt;br /&gt;
For ATI X1400, to get the laptop to wake up from suspend, I had to change the following in /etc/default/acpi-support:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
SAVE_VBE_STATE=false&lt;br /&gt;
&lt;br /&gt;
POST_VIDEO=false &lt;br /&gt;
&lt;br /&gt;
ENABLE_LAPTOP_MODE=false&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
For Radeon 3200, to wake up from suspend, I had to add the following lines to /etc/X11/xorg.conf:&lt;br /&gt;
(This settings is not good option, if you are using compiz-fusion or any other transparency-based thingie. Not working for HD 3850)&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
Section &amp;quot;Extensions&amp;quot;&lt;br /&gt;
        Option        &amp;quot;Composite&amp;quot;        &amp;quot;Disable&amp;quot;&lt;br /&gt;
EndSection&lt;br /&gt;
&lt;br /&gt;
Section &amp;quot;ServerFlags&amp;quot;&lt;br /&gt;
       Option  &amp;quot;AIGLX&amp;quot; &amp;quot;off&amp;quot; &lt;br /&gt;
EndSection&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== Error! This module/version combo is already installed ===&lt;br /&gt;
&lt;br /&gt;
Simply uninstall the previous version before installing the new one with&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo dkms remove -m fglrx -v 8.522 --all&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Category:Installation Documentation]]&lt;/div&gt;</summary>
		<author><name>85.18.14.45</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Ubuntu_Hardy_Installation_Guide&amp;diff=5007</id>
		<title>Ubuntu Hardy Installation Guide</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Ubuntu_Hardy_Installation_Guide&amp;diff=5007"/>
		<updated>2008-11-06T16:34:05Z</updated>

		<summary type="html">&lt;p&gt;85.18.14.45: /* 4. Add driver to kernel module blacklist. */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;For most users it won&#039;t be necessary to go into installation and configuration details of the driver. Ubuntu 8.04 (Hardy) provides a notification saying that there are restricted drivers available. You just have to go there (Restricted Drivers Manager) and enable the &amp;quot;ATI accelerated graphics driver&amp;quot;. Ubuntu will then install and configure the driver for you. If this does not provide the optimal solution you were looking for, please read ahead.&lt;br /&gt;
&lt;br /&gt;
After installation, in GNOME or Kubuntu, &#039;&#039;&#039;turn off visual effects&#039;&#039;&#039; or you will notice a flicker in OpenGL.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Method 1: Install the driver the Ubuntu Way ==&lt;br /&gt;
&lt;br /&gt;
This will install the current driver in Ubuntu&#039;s repository. It is older than the one AMD has released, but will be supported by the Ubuntu people. Catalyst 8.3 is in the repositories.&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo apt-get update&lt;br /&gt;
&lt;br /&gt;
$ sudo apt-get install linux-restricted-modules-generic restricted-manager&lt;br /&gt;
&lt;br /&gt;
$ sudo apt-get install xorg-driver-fglrx&lt;br /&gt;
&lt;br /&gt;
$ sudo depmod -a&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
The second line may not be necessary as you may already have restricted modules installed. Run it just in case. If the third line fails, you probably don&#039;t have the restricted repository enabled. See Pre-Installation.&lt;br /&gt;
&lt;br /&gt;
After this, you may need to edit Xorg.conf:&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo gedit /etc/X11/xorg.conf&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
In the device section, if it is not already there add:&lt;br /&gt;
&lt;br /&gt;
{{Box File|/etc/X11/xorg.conf|&lt;br /&gt;
Driver     &amp;quot;fglrx&amp;quot;&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Then to make sure Xorg is set up correctly, you&#039;ll have to let aticonfig &amp;quot;initialize&amp;quot; it:&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo aticonfig --initial -f&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
After this you should be able to restart your computer and have the driver working. To test type&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ fglrxinfo&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
into a terminal. If the vendor string is not ATI, but Mesa, check [[#Removing Mesa drivers]]&lt;br /&gt;
&lt;br /&gt;
==== Post-Installation Tweaks ====&lt;br /&gt;
To enable hardware accelerated video on pre-R500 cards, edit &#039;&#039;&#039;/etc/X11/xorg.conf&#039;&#039;&#039; to include the following lines without &#039;&#039;&#039;[...]&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
{{Box File|/etc/X11/xorg.conf|&lt;br /&gt;
Section &amp;quot;Device&amp;quot;&lt;br /&gt;
:[...]&amp;lt;br /&amp;gt;&lt;br /&gt;
:Driver		&amp;quot;fglrx&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:Option		&amp;quot;VideoOverlay&amp;quot;	&amp;quot;on&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:Option		&amp;quot;OpenGLOverlay&amp;quot;	&amp;quot;off&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:[...]&amp;lt;br /&amp;gt;&lt;br /&gt;
EndSection&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Note that when Visual Effects (Compiz) are active, flickering and artifacts may occur in OpenGL applications and hardware accelerated video windows (particularly with R300 chipset).  To prevent this, disable Visual Effects.&lt;br /&gt;
&lt;br /&gt;
On newer cards the options below enables Visual Effects and video to be played without flicker. The Textured video option can be turned on, but this can cause flicker or diagonal artifacts when playing videos.&lt;br /&gt;
&lt;br /&gt;
{{Box File|/etc/X11/xorg.conf|&lt;br /&gt;
Section &amp;quot;Device&amp;quot;&lt;br /&gt;
:[...]&amp;lt;br /&amp;gt;&lt;br /&gt;
:Driver	&amp;quot;fglrx&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:Option	&amp;quot;VideoOverlay&amp;quot;	&amp;quot;off&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:Option	&amp;quot;OpenGLOverlay&amp;quot;	&amp;quot;on&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:Option &amp;quot;TexturedVideo&amp;quot; &amp;quot;off&amp;quot;&amp;lt;br /&amp;gt;&lt;br /&gt;
:[...]&amp;lt;br /&amp;gt;&lt;br /&gt;
EndSection&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
== Method 2: Manual Install Method ==&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;If you are using the x86_64 architecture (64 bit), be sure to inst &amp;quot;ia32-libs&amp;quot; before proceeding!&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Make sure &#039;&#039;universe&#039;&#039; and &#039;&#039;multiverse&#039;&#039; are enabled in your repository sources.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;1. Install necessary build tools.&#039;&#039;===&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo apt-get update&amp;lt;br /&amp;gt;&lt;br /&gt;
$ sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++5 dkms linux-headers-$(uname -r)&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;2. Download the latest Catalyst package.&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
Download page: Catalyst {{catalystversion}}. This package contains both the 32-bit and 64-bit driver.&lt;br /&gt;
&lt;br /&gt;
Open a terminal window and switch to the directory you downloaded the installer to. &lt;br /&gt;
For example:&amp;lt;pre&amp;gt;cd Desktop&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;3. Create .deb packages.&#039;&#039;===&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sh {{catalystfilename}} --buildpkg Ubuntu/hardy&lt;br /&gt;
}}&lt;br /&gt;
(&amp;quot;hardy&amp;quot; is not a typo)&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;4. Add driver to kernel module blacklist.&#039;&#039;===&lt;br /&gt;
&#039;&#039;&#039;NOTE&#039;&#039;&#039;: This step is no more necessary with fglrx 8-10. Just jump to step 5 in that case.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
The ATI driver must be added to the kernel module blacklist so that the new ATI driver will be used. If it is not blacklisted, the official Ubuntu repository version of the ATI driver will be loaded instead.&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo gedit /etc/default/linux-restricted-modules-common&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Add &amp;quot;fglrx&amp;quot; to the line &amp;quot;DISABLED_MODULES&amp;quot;&lt;br /&gt;
{{Box File|/etc/default/linux-restricted-modules-common|&lt;br /&gt;
&amp;lt;pre&amp;gt;DISABLED_MODULES=&amp;quot;fglrx&amp;quot;&amp;lt;/pre&amp;gt;&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Please note that after the modification above, the &amp;quot;Restricted Driver Manager&amp;quot; will signal &amp;quot;ATI accelerated graphics driver&amp;quot; not enabled (unticked). This is perfectly correct. At the end of the installation procedure it will signal in Status: &amp;quot;in use&amp;quot; (green light), but NOT enabled. It simply means that the fglrx module contained in the linux-restricted-modules package is not enabled, but another fglrx module ({{catalystversion}}) is in use.&lt;br /&gt;
&lt;br /&gt;
You may also need to edit the file(s) (if they exist):&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo gedit /etc/modprobe.d/blacklist-restricted&lt;br /&gt;
$ sudo gedit /etc/modprobe.d/blacklist-local&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Put a # in front of the line &amp;quot;blacklist fglrx&amp;quot;, if it is present. Otherwise, the kernel module will not load automatically, and you will not get 3D acceleration.&lt;br /&gt;
&lt;br /&gt;
===&#039;&#039;5. Install .debs.&#039;&#039;===&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;For 32 Bits&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo dpkg -i xorg-driver-fglrx_8.542-0ubuntu1_i386.deb fglrx-kernel-source_8.542-0ubuntu1_i386.deb fglrx-amdcccle_8.542-0ubuntu1_i386.deb&lt;br /&gt;
}}&lt;br /&gt;
&#039;&#039;Using [http://en.wikipedia.org/wiki/Command_line_completion tab completion] can make this command easier.&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;For 64 Bits&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo dpkg -i xorg-driver-fglrx_8.542-0ubuntu1_amd64.deb fglrx-kernel-source_8.542-0ubuntu1_amd64.deb fglrx-amdcccle_8.542-0ubuntu1_amd64.deb&lt;br /&gt;
}}&lt;br /&gt;
&#039;&#039;Using [http://en.wikipedia.org/wiki/Command_line_completion tab completion] can make this command easier.&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
=== Additional 64-bit instructions ===&lt;br /&gt;
&lt;br /&gt;
If you have a 64 bit install, the above dpkg command may complain that &amp;quot;Errors were encountered while processing: fglrx-amdcccle&amp;quot;.  This is because of a dependency of the amdccle package on 32 bit libraries.  If you receive this error, issue the following command after the above dpkg command, which will force the installation of all of the 32 bit dependencies, and then the amdccle package:&lt;br /&gt;
&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo apt-get install -f&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Catalyst {{catalystversion}} on 64-bit systems requires the &#039;&#039;--force-overwrite&#039;&#039; command in the above &#039;&#039;dpkg&#039;&#039; command:&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo dpkg -i --force-overwrite xorg-driver-fglrx_8.522*.deb fglrx-kernel-source_8.522-0*.deb fglrx-amdcccle_8.522-0*.deb&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
When installing the packages, if &amp;lt;tt&amp;gt;xorg-driver-fglrx_8.522&amp;lt;/tt&amp;gt; fails to install due to a diverted file conflict, you can [http://emmetcaulfield.net/Tech/ATIv84+Hardy/ fix the package with this procedure].&lt;br /&gt;
&lt;br /&gt;
===Fix for an error:===&lt;br /&gt;
If you are having this error:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
dpkg-shlibdeps: failure: couldn&#039;t find library libfglrx_gamma.so.1 needed by debian/xorg-driver-fglrx/usr/bin/fglrx_xgamma (its RPATH is &#039;&#039;).&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Fix it by doing the following:&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ sudo sh ati-driver-installer-8-7-x86.x86_64.run --extract driver&lt;br /&gt;
$ cd driver/arch/x86_64/usr/X11R6/lib64&lt;br /&gt;
$ sudo ln -s libfglrx_gamma.so.1.0 libfglrx_gamma.so.1&lt;br /&gt;
$ cd ../../../../../&lt;br /&gt;
$ sudo sh ati-installer.sh -- --buildpkg Ubuntu/hardy&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
=== Finishing the Install: Configuration ===&lt;br /&gt;
&lt;br /&gt;
If you&#039;ve used fglrx previously, you will not need to do this.&lt;br /&gt;
&lt;br /&gt;
Now you&#039;ll have to edit your xorg.conf&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo gedit /etc/X11/xorg.conf&amp;lt;/pre&amp;gt;&lt;br /&gt;
and add the following line to the Device section (if it does not already exist).  Include the following lines without &#039;&#039;&#039;[...]&#039;&#039;&#039;: &lt;br /&gt;
&amp;lt;pre&amp;gt;Section &amp;quot;Device&amp;quot;&lt;br /&gt;
	[...]&lt;br /&gt;
	Driver		&amp;quot;fglrx&amp;quot;&lt;br /&gt;
	[...]&lt;br /&gt;
EndSection&amp;lt;/pre&amp;gt;&lt;br /&gt;
Save and exit, then run&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo aticonfig --initial -f&amp;lt;/pre&amp;gt;&lt;br /&gt;
in a terminal. If it does not error you should be fine. &lt;br /&gt;
&lt;br /&gt;
Some people find that changes to xorg.conf don&#039;t get used by the driver. To force the ati driver to adopt changes made to xorg.conf, type the following command:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo aticonfig --input=/etc/X11/xorg.conf --tls=1&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
Finally, reboot the computer and type&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
fglrxinfo&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
into the terminal. If the vendor string contains ATI, you have installed the driver successfully. Release 8.8 looks like:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
display: :0.0  screen: 0&lt;br /&gt;
OpenGL vendor string: ATI Technologies Inc.&lt;br /&gt;
OpenGL renderer string: Radeon X1950 Series&lt;br /&gt;
OpenGL version string: 2.1.7873 Release&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Please note: Depending on the particular ATI card that you own, you may or may not automatically have all of the relevant driver features enabled.  R500 and R600 cards (X1xxx, HD series, and newer) in particular will need TexturedVideo enabled in Xorg.conf (rather than the traditional VideoOverlay) in order to support Xv accelerated video playback.&lt;br /&gt;
&lt;br /&gt;
=== Removing Mesa drivers ===&lt;br /&gt;
If fglrxinfo reports that Indirect rendering by Mesa is in place, even though you have installed ATI driver, check:&lt;br /&gt;
&lt;br /&gt;
*Remove the package xserver-xgl.&lt;br /&gt;
:&amp;lt;pre&amp;gt;sudo apt-get remove xserver-xgl&amp;lt;/pre&amp;gt;&lt;br /&gt;
:&#039;&#039;&#039;Explanation:&#039;&#039;&#039; If you installed this previously in order to make compiz work, it will not allow direct rendering on your display. You can check out if this is what it causing the problem by running&lt;br /&gt;
:&amp;lt;pre&amp;gt;DISPLAY=:0 glxinfo | grep render&amp;lt;/pre&amp;gt;&lt;br /&gt;
:If it returns an ATI renderer, it means that xgl is being displayed indirectly on the display 1. (Taken from [http://ubuntuforums.org/showthread.php?t=740287])&lt;br /&gt;
&lt;br /&gt;
:&#039;&#039;&#039;Warning:&#039;&#039;&#039; This might make your compiz stop working as it is configured to use XGL. A solution might be to run the Envy script in order to configure compiz.  Or, if Compiz stopped working due to &amp;quot;Composite&amp;quot; problem, check that the following is set in the /etc/X11/xorg.conf&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
Section &amp;quot;Extensions&amp;quot;&lt;br /&gt;
	Option		&amp;quot;Composite&amp;quot;	&amp;quot;Enable&amp;quot;&lt;br /&gt;
EndSection&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
*Check for AGP and DRI errors in /var/log/Xorg.0.log like these are: &lt;br /&gt;
:&amp;lt;i&amp;gt;(EE) fglrx(0): [agp] unable to acquire AGP, error -1023&lt;br /&gt;
:(EE) fglrx(0): cannot init AGP&lt;br /&gt;
:(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.&lt;br /&gt;
:(WW) fglrx(0): * DRI initialization failed!                  *&amp;lt;/i&amp;gt;&lt;br /&gt;
&lt;br /&gt;
:If you have Intel 8285P and E7205 chipsets and AGP not detected then you have to remove the i82875p_edac module and restart a some others: &lt;br /&gt;
&amp;lt;pre&amp;gt;rmmod i82875p_edac&lt;br /&gt;
rmmod fglrx&lt;br /&gt;
rmmod intel-agp&lt;br /&gt;
rmmod agpgart&lt;br /&gt;
modprobe agpgart&lt;br /&gt;
modprobe intel-agp&lt;br /&gt;
modprobe fglrx&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
:Blacklist the modules e7xxx_edac so it doesn&#039;t start up again when booting - add the following line at the beginning of /etc/modprobe.d/blacklist:&lt;br /&gt;
:&amp;lt;pre&amp;gt;blacklist i82875p_edac&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
:This has been known to fix issues with -Mesa -AGP -DRI -Google earth and -suspend to RAM (s2ram).&lt;br /&gt;
 &lt;br /&gt;
:&#039;&#039;&#039;Explanation:&#039;&#039;&#039; http://openwetware.org/wiki/Computing/Linux/Ubuntu&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
----&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
*Check you are running the correct kernel. &lt;br /&gt;
:&#039;&#039;&#039;Explanation:&#039;&#039;&#039; If you&#039;re upgrading from Gutsy to Hardy in some instances the Grub bootloader does not get updated and the new kernel is not loaded.&lt;br /&gt;
:Run in a terminal:&lt;br /&gt;
{{Box Terminal|&lt;br /&gt;
$ uname -r&lt;br /&gt;
}}&lt;br /&gt;
:If the output starts with 2.6.22 or below you are not using the current kernel and the Ati drivers will not load properly.&lt;br /&gt;
&lt;br /&gt;
If this doesn&#039;t help, try [[Ubuntu Gutsy Installation Guide#Verifying]], or other links: [http://wiki.cchtml.com/index.php/Troubleshooting#No_3D_acceleration], [http://www.thinkwiki.org/wiki/Problems_with_fglrx#Perpetual_Mesa_GLX_Indirect_on_Debian], [http://ubuntuforums.org/archive/index.php/t-475699.html].&lt;br /&gt;
&lt;br /&gt;
== Specific Issues ==&lt;br /&gt;
&lt;br /&gt;
=== Hang at logout ===&lt;br /&gt;
&lt;br /&gt;
If you experience hangs when logging out (of X) it is probably due to the /etc/ati/authatieventsd.sh script looking for X authorisation files in the wrong place when it starts up. You can kill the hanging authatieventsd.sh processes from a console tty to allow the shutdown of the X server. This can be fixed permanently with:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo mkdir -p /var/lib/xdm/authdir&lt;br /&gt;
sudo ln -s /var/run/xauth /var/lib/xdm/authdir/authfiles&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
If that doesn&#039;t work then you can disable atieventsd with this command:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo /usr/sbin/update-rc.d -f atieventsd remove&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== Suspend/Hibernation ===&lt;br /&gt;
&lt;br /&gt;
Suspend hibernation &#039;&#039;&#039;works&#039;&#039;&#039; with the latest driver.&lt;br /&gt;
&lt;br /&gt;
For ATI X1400, to get the laptop to wake up from suspend, I had to change the following in /etc/default/acpi-support:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
SAVE_VBE_STATE=false&lt;br /&gt;
&lt;br /&gt;
POST_VIDEO=false &lt;br /&gt;
&lt;br /&gt;
ENABLE_LAPTOP_MODE=false&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
For Radeon 3200, to wake up from suspend, I had to add the following lines to /etc/X11/xorg.conf:&lt;br /&gt;
(This settings is not good option, if you are using compiz-fusion or any other transparency-based thingie. Not working for HD 3850)&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
Section &amp;quot;Extensions&amp;quot;&lt;br /&gt;
        Option        &amp;quot;Composite&amp;quot;        &amp;quot;Disable&amp;quot;&lt;br /&gt;
EndSection&lt;br /&gt;
&lt;br /&gt;
Section &amp;quot;ServerFlags&amp;quot;&lt;br /&gt;
       Option  &amp;quot;AIGLX&amp;quot; &amp;quot;off&amp;quot; &lt;br /&gt;
EndSection&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== Error! This module/version combo is already installed ===&lt;br /&gt;
&lt;br /&gt;
Simply uninstall the previous version before installing the new one with&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo dkms remove -m fglrx -v 8.522 --all&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Category:Installation Documentation]]&lt;/div&gt;</summary>
		<author><name>85.18.14.45</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Talk:Ubuntu_Hardy_Installation_Guide&amp;diff=5103</id>
		<title>Talk:Ubuntu Hardy Installation Guide</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Talk:Ubuntu_Hardy_Installation_Guide&amp;diff=5103"/>
		<updated>2008-11-06T16:31:12Z</updated>

		<summary type="html">&lt;p&gt;85.18.14.45: /* DISABLED_MODULES=&amp;quot;fglrx&amp;quot; */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{Talkpages}}&lt;br /&gt;
&lt;br /&gt;
== Cleanup ==&lt;br /&gt;
&lt;br /&gt;
I did a little cleanup and formatting, and clarified the configuration section in Method 2.  I inserted a comment about TexturedVideo on the newer cards for Xv, as well.  I hope nobody minds.  --[[User:Porter|Porter]] 08:11PM EDT 29 April 2008&lt;br /&gt;
&lt;br /&gt;
I&#039;ve also done a little cleanup on method two. I removed some extra steps that were not needed and rephrased some of the text so that it flows better. I also changed some incorrect statements. --[[User:Compwiz18|Compwiz18]] 07:56, 22 May 2008 (CDT)&lt;br /&gt;
&lt;br /&gt;
== Updating a manually installed driver ==&lt;br /&gt;
&lt;br /&gt;
Would it be good to add some notes on how to update the driver when new releases are available. I&#039;m a little unsure of this myself; is it as simple as building the packages as per the instructions and doing the usual sudo apt-get install or is there more to it?&lt;br /&gt;
:There is no auto-update routine as of yet.  Upgrading will require a simple download, build, and install per the existing method.  --[[User:Porter|Porter]] 02:10PM EDT 06 May 2008&lt;br /&gt;
&lt;br /&gt;
OK, thanks. I should also mention I did a manual install on a clean install of Kubuntu Hardy - everything is fine but the restricted drivers GUI tool (jockey-kde) notes that fglrx is &amp;quot;In Use&amp;quot; AND &amp;quot;enabled&amp;quot;. Shouldn&#039;t be any need to panic :)&lt;br /&gt;
&lt;br /&gt;
&amp;quot;In USE&amp;quot; and &amp;quot;ENABLED&amp;quot; is also shown by Restricted drivers manager in Gnome after using the second manual instalation method. However, the driver works fine.&lt;br /&gt;
&lt;br /&gt;
--- Eugenio, 10:45(CET), Monday, 12th May 2008&lt;br /&gt;
&lt;br /&gt;
== Problem with vboxdrv and fglrx ==&lt;br /&gt;
&lt;br /&gt;
May it worth mention https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/284505/comments/14 at the bottom of the page ? I have been all day long looking for how to solve it!! :)&lt;br /&gt;
&lt;br /&gt;
--alejandro 18:24(GMT+1)&lt;br /&gt;
&lt;br /&gt;
== DISABLED_MODULES=&amp;quot;fglrx&amp;quot; ==&lt;br /&gt;
&lt;br /&gt;
With 8-10 driver and Ubuntu 8.04 is no more necessary to disable fglrx in the restricted modules.&lt;br /&gt;
The package fglrx-modaliases_* , in fact, provides compatibility with Jockey and in the restricted drivers window, the driver appears as present and in use.&lt;br /&gt;
--[[Special:Contributions/85.18.14.45|85.18.14.45]] 16:31, 6 November 2008 (UTC)&lt;/div&gt;</summary>
		<author><name>85.18.14.45</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Talk:Ubuntu_Hardy_Installation_Guide&amp;diff=5102</id>
		<title>Talk:Ubuntu Hardy Installation Guide</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Talk:Ubuntu_Hardy_Installation_Guide&amp;diff=5102"/>
		<updated>2008-11-06T16:30:20Z</updated>

		<summary type="html">&lt;p&gt;85.18.14.45: /* DISABLED_MODULES=&amp;quot;fglrx&amp;quot; */ new section&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{Talkpages}}&lt;br /&gt;
&lt;br /&gt;
== Cleanup ==&lt;br /&gt;
&lt;br /&gt;
I did a little cleanup and formatting, and clarified the configuration section in Method 2.  I inserted a comment about TexturedVideo on the newer cards for Xv, as well.  I hope nobody minds.  --[[User:Porter|Porter]] 08:11PM EDT 29 April 2008&lt;br /&gt;
&lt;br /&gt;
I&#039;ve also done a little cleanup on method two. I removed some extra steps that were not needed and rephrased some of the text so that it flows better. I also changed some incorrect statements. --[[User:Compwiz18|Compwiz18]] 07:56, 22 May 2008 (CDT)&lt;br /&gt;
&lt;br /&gt;
== Updating a manually installed driver ==&lt;br /&gt;
&lt;br /&gt;
Would it be good to add some notes on how to update the driver when new releases are available. I&#039;m a little unsure of this myself; is it as simple as building the packages as per the instructions and doing the usual sudo apt-get install or is there more to it?&lt;br /&gt;
:There is no auto-update routine as of yet.  Upgrading will require a simple download, build, and install per the existing method.  --[[User:Porter|Porter]] 02:10PM EDT 06 May 2008&lt;br /&gt;
&lt;br /&gt;
OK, thanks. I should also mention I did a manual install on a clean install of Kubuntu Hardy - everything is fine but the restricted drivers GUI tool (jockey-kde) notes that fglrx is &amp;quot;In Use&amp;quot; AND &amp;quot;enabled&amp;quot;. Shouldn&#039;t be any need to panic :)&lt;br /&gt;
&lt;br /&gt;
&amp;quot;In USE&amp;quot; and &amp;quot;ENABLED&amp;quot; is also shown by Restricted drivers manager in Gnome after using the second manual instalation method. However, the driver works fine.&lt;br /&gt;
&lt;br /&gt;
--- Eugenio, 10:45(CET), Monday, 12th May 2008&lt;br /&gt;
&lt;br /&gt;
== Problem with vboxdrv and fglrx ==&lt;br /&gt;
&lt;br /&gt;
May it worth mention https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/284505/comments/14 at the bottom of the page ? I have been all day long looking for how to solve it!! :)&lt;br /&gt;
&lt;br /&gt;
--alejandro 18:24(GMT+1)&lt;br /&gt;
&lt;br /&gt;
== DISABLED_MODULES=&amp;quot;fglrx&amp;quot; ==&lt;br /&gt;
&lt;br /&gt;
With 8-10 driver and Ubuntu 8.04 is no more necessary to disable fglrx in the restricted modules.&lt;br /&gt;
The package fglrx-modaliases_* , in fact, provides compatibility with Jockey and in the restricted drivers window, the driver appears as present and in use.&lt;/div&gt;</summary>
		<author><name>85.18.14.45</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Ubuntu_Gutsy_Installation_Guide&amp;diff=4283</id>
		<title>Ubuntu Gutsy Installation Guide</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Ubuntu_Gutsy_Installation_Guide&amp;diff=4283"/>
		<updated>2007-11-11T00:10:40Z</updated>

		<summary type="html">&lt;p&gt;85.18.136.90: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;The [[:Category:Releases|latest]] fglrx driver supports Radeon 9500  and the X-series cards up to HD2900. Workstation cards are not supported.&lt;br /&gt;
&lt;br /&gt;
==Pre-Installation Checks==&lt;br /&gt;
=== Enable &amp;quot;restricted&amp;quot; Repository ===&lt;br /&gt;
Make sure the &#039;&#039;restricted&#039;&#039; repository is enabled in &#039;&#039;/etc/apt/sources.list&#039;&#039; or this guide will not work!&lt;br /&gt;
&lt;br /&gt;
System &amp;gt; Administration &amp;gt; Software Sources.  Check &amp;quot;Proprietary Drivers for Devices (Restricted)&amp;quot; box.&lt;br /&gt;
&lt;br /&gt;
== Installation ==&lt;br /&gt;
&lt;br /&gt;
For most users it won&#039;t be necessary to go into installation and configuration details of the driver. Ubuntu 7.10 (Gutsy) provides a notification saying that there are restricted drivers available. You just have to go there (Restricted Drivers Manager) and enable the &amp;quot;ATI accelerated graphics driver&amp;quot;. Ubuntu will then install and configure the driver for you. If this does not provide the optimal solution you were looking for, please read ahead.&lt;br /&gt;
&lt;br /&gt;
===Method 1: Install the Driver the Ubuntu Way===&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo apt-get update	&lt;br /&gt;
sudo apt-get install linux-restricted-modules-generic restricted-manager&lt;br /&gt;
sudo apt-get install xorg-driver-fglrx&lt;br /&gt;
sudo depmod -a&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Note: The second line of the above may not be necessary.  If apt says it cannot find the &amp;quot;linux-restricted-modules&amp;quot; package, try line 3.  If that fails, check your sources.list (see top of page)&lt;br /&gt;
&lt;br /&gt;
If the system complains about dependencies, use your preferred package manager to download python2.4 and, if necessary, its dependencies.&lt;br /&gt;
&lt;br /&gt;
(Note: This method did not work with ATI X1300 Radeon on Gutsy whereas method 2 worked perfectly for us. 26/10/2007)&lt;br /&gt;
&lt;br /&gt;
===Method 2: Install the 8.42.3 Driver Manually===&lt;br /&gt;
&lt;br /&gt;
*Note: &#039;&#039;This is just an alternative installation method for the section above. It might help if you still get &#039;DRI missing&#039; errors.&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Download the ATI driver installer:&lt;br /&gt;
[http://www2.ati.com/drivers/linux/ati-driver-installer-8.42.3-x86.x86_64.run ati-driver-installer-8.42.3-x86.x86_64.run] (this installer is for 32bit &#039;&#039;&#039;and&#039;&#039;&#039; 64bit systems)&lt;br /&gt;
&lt;br /&gt;
Change to the download directory.  Make sure that you have the &#039;&#039;universe&#039;&#039; and &#039;&#039;multiverse&#039;&#039; repositories enabled in &#039;&#039;/etc/apt/sources.list&#039;&#039; before doing these steps.  &lt;br /&gt;
&lt;br /&gt;
There is a detailed manual with screenshots at [https://wiki.ubuntu.com/AddingRepositoriesHowto Ubuntu Wiki].&lt;br /&gt;
&lt;br /&gt;
By default, Ubuntu did not enable the Universe and Multiverse repositories, but now in Gutsy, both Universe and Multiverse are activated by default.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Install necessary tools:&#039;&#039;&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo apt-get update&lt;br /&gt;
sudo apt-get install module-assistant build-essential fakeroot dh-make debhelper \&lt;br /&gt;
debconf libstdc++5 linux-headers-generic&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Create .deb packages:&#039;&#039; &lt;br /&gt;
&lt;br /&gt;
(don&#039;t use fakeroot ,&amp;quot;fakeroot: nested operation not yet supported&amp;quot;)&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo bash ati-driver-installer-8.42.3-x86.x86_64.run --buildpkg Ubuntu/gutsy&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Blacklist old fglrx module from linux-restricted-modules:&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
As Ubuntu Gutsy&#039;s &#039;&#039;linux-restricted-modules&#039;&#039; package includes the fglrx module from an old driver version (8.37.6), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.&lt;br /&gt;
&lt;br /&gt;
Ubuntu/Gnome users type in:&lt;br /&gt;
&amp;lt;pre&amp;gt;gksu gedit /etc/default/linux-restricted-modules-common&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Kubuntu/KDE users type in:&lt;br /&gt;
&amp;lt;pre&amp;gt;kdesu kate /etc/default/linux-restricted-modules-common&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Add &amp;quot;fglrx&amp;quot; to the line &amp;quot;DISABLED_MODULES&amp;quot;&lt;br /&gt;
{{Box File|/etc/default/linux-restricted-modules-common|&lt;br /&gt;
&amp;lt;pre&amp;gt;DISABLED_MODULES=&amp;quot;fglrx&amp;quot;&amp;lt;/pre&amp;gt;&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Install .deb packages:&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo dpkg -i xorg-driver-fglrx_8.42.3-1*.deb \&lt;br /&gt;
fglrx-kernel-source_8.42.3-1*.deb \&lt;br /&gt;
fglrx-amdcccle_8.42.3-1*.deb&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
*Note: If you get a &#039;Bad file descriptor&#039; message concerning the xorg.conf file try switching user to root and repeating the same command without sudo. This might be valid for the following commands too. (Ubuntu Gutsy installs with no password set for root by default. You can set a password for the root by typing &#039;sudo passwd root&#039; first.)&lt;br /&gt;
&lt;br /&gt;
*Note: If you have a 64 bit install, the above dpkg command will likely complain that &amp;quot;Errors were encountered while processing: fglrx-amdcccle&amp;quot;.  This is because of a dependency of the amdccle package on 32 bit libraries.  If you recieve this error, issue the following command after the above dpkg command, which will force the installation of all of the 32 bit dependencies, and then the amdccle pacakge:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo apt-get install -f&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Remove any old fglrx debs from /usr/src/:&#039;&#039;&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo rm /usr/src/fglrx-kernel*.deb&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Fix broken dependencies&#039;&#039;&lt;br /&gt;
*Note: &#039;&#039;You only need to do this if you have installed previous versions of these drivers using this method before.&#039;&#039;&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo apt-get -f install&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Compile the kernel module:&#039;&#039;&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo module-assistant prepare,update&lt;br /&gt;
sudo module-assistant build,install fglrx -f&lt;br /&gt;
sudo depmod -a&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
It&#039;s necessary, because sometimes this file is written by other packages, and so there&#039;s no 3D acceleration.&lt;br /&gt;
Check that the file /lib/modules/$(uname -r)/misc/fglrx.ko has been created.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Create the following folder&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo mkdir /lib/modules/$(uname -r)/volatile&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Note: the volatile directory might already exist at this stage then simply continue with the next step. &lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Create a symbolic link&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo ln -sf /lib/modules/$(uname -r)/misc/fglrx.ko /lib/modules/$(uname -r)/volatile/fglrx.ko&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
NOTE : On my Gutsy install, after a reboot this link was always removed automatically leaving me without an fglrx module loaded, and thus no ATI rendering. There are different ways to succesfully do the job, but I personally tested this method on more than 5 pc and went ok.&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo gedit_or_kate /etc/init.d/gdm_or_kdm&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
copy these two line at the beginning of the file right on top of the command &amp;quot;set 0&amp;quot; :&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
ln -s /lib/modules/2.6.22-14-generic/misc/fglrx.ko /lib/modules/2.6.22-14-generic/volatile/&lt;br /&gt;
modprobe fglrx&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;IMPORTANT&#039;&#039;&#039;: You have to recompile the kernel module after each kernel update! &lt;br /&gt;
(Note: This does not affect you until the next time you update your kernel.)&lt;br /&gt;
&lt;br /&gt;
===Configure the Driver===&lt;br /&gt;
*Note Method 2 Users: Before you carry out this step you must reboot your machine. Or else the fglrx driver will not be in use on xorg.conf and using the aticonfig options will cause a memory dump and not intialise the Driver properly.&lt;br /&gt;
*Note: An &#039;&#039;&#039;alternative&#039;&#039;&#039; to the &#039;&#039;&#039;aticonfig --initial&#039;&#039;&#039; command is to edit &#039;&#039;/etc/X11/xorg.conf&#039;&#039; and replace the string &amp;quot;ati&amp;quot; with &amp;quot;fglrx&amp;quot; in the &amp;quot;Device&amp;quot; section. This way you won&#039;t lose your old &amp;quot;Screen&amp;quot; and &amp;quot;Monitor&amp;quot; settings. Afterwards you can use aticonfig for setting overlay etc. Another alternative is &#039;&#039;&#039;aticonfig --initial --force&#039;&#039;&#039; if you encounter issues with the first command.&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo aticonfig --initial&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
Then:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo aticonfig --overlay-type=Xv&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
*Note: Is there an alternative to the previous step?&lt;br /&gt;
&lt;br /&gt;
===Finish the Installation===&lt;br /&gt;
Now save any open document and reboot your system:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo shutdown -r now&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
*Note: An &#039;&#039;&#039;alternative&#039;&#039;&#039; to rebooting is to restart the X Server by pressing your CTRL ALT BACKSPACE keys. You must remove any old kernel modules such as &amp;quot;drm&amp;quot; &amp;quot;radeon&amp;quot; or &amp;quot;fglrx&amp;quot; using the &amp;quot;rmmod&amp;quot; command. Example: &amp;lt;code&amp;gt;sudo rmmod fglrx&amp;lt;/code&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Post-Installation Checks ==&lt;br /&gt;
===Verifying===&lt;br /&gt;
Run the following command to check its output to ensure the fglrx driver is installed properly:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
$ fglrxinfo&lt;br /&gt;
display: :0.0  screen: 0&lt;br /&gt;
OpenGL vendor string: ATI Technologies Inc.&lt;br /&gt;
OpenGL renderer string: ATI Radeon Xpress Series&lt;br /&gt;
OpenGL version string: 2.0.6958 Release&lt;br /&gt;
&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
The &amp;lt;code&amp;gt;OpenGL vendor string&amp;lt;/code&amp;gt; should read &#039;&#039;&#039;ATI&#039;&#039;&#039; and not &#039;&#039;&#039;Mesa&#039;&#039;&#039;.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;If it still says &#039;&#039;Mesa&#039;&#039; and not &#039;&#039;ATI&#039;&#039;, even after re-enabling the driver from the Restricted-manager:&#039;&#039;&#039;&lt;br /&gt;
You can try the following:&lt;br /&gt;
:*Remove all the packages provided by the &amp;lt;code&amp;gt;xserver-xorg-video-all&amp;lt;/code&amp;gt; meta-package (search for it using Synaptic or Adept), then restart the machine. The X Server should now use the new fglrx driver by force (provided the driver is being used in &#039;&#039;xorg.conf&#039;&#039;).&lt;br /&gt;
::If you can&#039;t log in after this, you&#039;ll have to log in to a terminal in the login screen, and reinstall the &amp;lt;code&amp;gt;xserver-xorg-video-all&amp;lt;/code&amp;gt; package. Your problem is probably somewhere else. (taken from [http://ubuntuforums.org/showpost.php?p=3655658&amp;amp;postcount=139]).&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;If it says &#039;&#039; libGL.so.1: cannot open shared object file: No such file or directory&#039;&#039;...&#039;&#039;&#039;&lt;br /&gt;
Check if you have a &#039;&#039;/usr/lib/libGL.so.1.2&#039;&#039;, if so do this:&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo ln -s /usr/lib/libGL.so.1.2 /usr/lib/libGL.so.1&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
If you see a message like &amp;quot;Xlib: extension &amp;quot;XFree86-DRI&amp;quot; missing on display &amp;quot;:0.0&amp;quot;.&amp;quot; you may simply need to enable the restricted drivers.&lt;br /&gt;
&lt;br /&gt;
Ubuntu and Kubuntu use a Restricted-Driver manager to load/unload non-FOSS drivers. Even if they are installed and specified in the xorg.conf does not mean they&#039;ll load properly. &lt;br /&gt;
&lt;br /&gt;
To start the restricted manager in both Ubuntu &amp;amp; Kbuntu:&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo /usr/bin/restricted-manager&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
If you check the box to enable the restricted driver and reboot, it should work.&lt;br /&gt;
&lt;br /&gt;
=== 3D desktop effects ===&lt;br /&gt;
The new ATI drivers use AIGLX so there is not need to install XGL that older drivers (&amp;lt; 8.40) required.&lt;br /&gt;
&lt;br /&gt;
Remove this section from to the /etc/X11/xorg.conf file.&lt;br /&gt;
The new xorg server enables &amp;quot;Composite&amp;quot; by default.&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
# Section &amp;quot;Extensions&amp;quot;&lt;br /&gt;
#        Option  &amp;quot;Composite&amp;quot; &amp;quot;0&amp;quot;&lt;br /&gt;
# EndSection&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Compiz does not know about the fglrx driver. You can either skip the checks&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;mkdir -p ~/.config/compiz &amp;amp;&amp;amp; echo SKIP_CHECKS=yes &amp;gt;&amp;gt; ~/.config/compiz/compiz-manager&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
or add it to the compiz white list, and clear the blacklist pci Ids variable &#039;&#039;&#039;*Recommended*&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo gedit /usr/bin/compiz&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
# Driver whitelist&lt;br /&gt;
WHITELIST=&amp;quot;fglrx nvidia intel ati radeon i810&amp;quot;&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
# blacklist based on the pci ids &lt;br /&gt;
# BLACKLIST_PCIIDS=&amp;quot;$T&amp;quot;&lt;br /&gt;
BLACKLIST_PCIIDS=&amp;quot;&amp;quot;&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
After the necessary configurations, just restart X and enjoy the cool effects.&lt;br /&gt;
&lt;br /&gt;
For Kubuntu you need some extra steps:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo apt-get install compiz compiz-kde compizconfig-settings-manager compiz-core compiz-fusion-plugins-main compiz-plugins&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
To test 3D Effects, press ALT+F2 and type &amp;quot;compiz --replace&amp;quot;.&lt;br /&gt;
&lt;br /&gt;
To configure use the tool KMenu-&amp;gt;Settings-&amp;gt;Avanced Desktop Effect Settings.&lt;br /&gt;
&lt;br /&gt;
=== Additional configure with aticonfig tool ===&lt;br /&gt;
You can configure the driver even further with the &#039;&#039;&#039;aticonfig&#039;&#039;&#039; tool, more information can be found at [[Configuring]].&lt;br /&gt;
&lt;br /&gt;
For example: &amp;lt;br&amp;gt;&lt;br /&gt;
* use powerplay option to switch power state for battery friendly or performance mode&lt;br /&gt;
* use dual head or one big desktop mode &lt;br /&gt;
* turn second monitor on/off on the fly&lt;br /&gt;
&lt;br /&gt;
==Ubuntu-specific Issues==&lt;br /&gt;
&lt;br /&gt;
=== If installing on Ubuntu x64... ===&lt;br /&gt;
&lt;br /&gt;
(thanks to Michael at Phoronix forums and aolana at Ubuntuforums.org)&lt;br /&gt;
&lt;br /&gt;
Building packages for Ubuntu 64-Bit is known to be broken. If you&#039;re installing on Ubuntu 64-Bit, do this:&lt;br /&gt;
&lt;br /&gt;
Download this: [http://www.michaellarabel.com/downloads/fglrx-8.42-ubuntu+debian-2.tar.bz2 fglrx-8.42-ubuntu+debian-2.tar.bz2]&lt;br /&gt;
&lt;br /&gt;
Extract the installer:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
bash ati-driver-installer-8.42.3-x86.x86_64.run --extract somedirectory&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Extract the archive you downloaded to the directory that you extracted the driver&#039;s installation files to.&lt;br /&gt;
&lt;br /&gt;
Then build the package:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
./ati-installer.sh 8.42.3 --buildpkg Ubuntu/gutsy&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== Revert to Xorg driver ===&lt;br /&gt;
&lt;br /&gt;
If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo dpkg-reconfigure xserver-xorg&amp;lt;/pre&amp;gt;&lt;br /&gt;
and selecting the &amp;quot;ati&amp;quot; driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup. &lt;br /&gt;
&lt;br /&gt;
You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo apt-get install --reinstall libgl1-mesa&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== Attention: Suspend/Hibernation will not work===&lt;br /&gt;
&lt;br /&gt;
With Gutsy release, there&#039;s a big problem using the ATI proprietary drivers. The Suspend/Hibernate function will stop working.&lt;br /&gt;
The problem is due to the new SLUB allocator incorporated in 2.6.22 / 2.6.23 Kernel. &lt;br /&gt;
There are no workaround, except:&lt;br /&gt;
&lt;br /&gt;
- Return to Feisty (with 2.6.20 kernel, and apply specific solutions: see Feisty installation guide).&lt;br /&gt;
&lt;br /&gt;
- Use default Mesa Drivers (the easiest way is to disable ATI driver from Restricted Driver Manager).&lt;br /&gt;
&lt;br /&gt;
- Recompiler your Kernel to use SLAB.&lt;br /&gt;
&lt;br /&gt;
Unfortunately some new ATI cards couldn&#039;t start X with Mesa drivers, so the only workaround is returning to Feisty.&lt;br /&gt;
&lt;br /&gt;
The problem will be solved in the next ATI driver release.&lt;br /&gt;
&lt;br /&gt;
===If you get  /usr/X11R6/lib/modules/dri/fglrx_dri.so not found===&lt;br /&gt;
&lt;br /&gt;
 sudo ln -s /usr/lib/ /usr/X11R6/lib/modules&lt;br /&gt;
&lt;br /&gt;
=== libGL error ===&lt;br /&gt;
* fglrxinfo gives:  libGL.so.1: cannot open shared object file.&lt;br /&gt;
* Fixed with command:&lt;br /&gt;
 sudo ln -s /usr/lib/libGL.so.1.2 /usr/lib/libGL.so.1&lt;br /&gt;
&lt;br /&gt;
==See Also==&lt;br /&gt;
*[[Frequently Asked Questions]]&lt;br /&gt;
*[[Performance Issues]]&lt;br /&gt;
*[[Troubleshooting]]&lt;br /&gt;
&lt;br /&gt;
[[Category:Installation Documentation]]&lt;/div&gt;</summary>
		<author><name>85.18.136.90</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Ubuntu_Gutsy_Installation_Guide&amp;diff=4282</id>
		<title>Ubuntu Gutsy Installation Guide</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Ubuntu_Gutsy_Installation_Guide&amp;diff=4282"/>
		<updated>2007-11-11T00:08:12Z</updated>

		<summary type="html">&lt;p&gt;85.18.136.90: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;The [[:Category:Releases|latest]] fglrx driver supports Radeon 9500  and the X-series cards up to HD2900. Workstation cards are not supported.&lt;br /&gt;
&lt;br /&gt;
==Pre-Installation Checks==&lt;br /&gt;
=== Enable &amp;quot;restricted&amp;quot; Repository ===&lt;br /&gt;
Make sure the &#039;&#039;restricted&#039;&#039; repository is enabled in &#039;&#039;/etc/apt/sources.list&#039;&#039; or this guide will not work!&lt;br /&gt;
&lt;br /&gt;
System &amp;gt; Administration &amp;gt; Software Sources.  Check &amp;quot;Proprietary Drivers for Devices (Restricted)&amp;quot; box.&lt;br /&gt;
&lt;br /&gt;
== Installation ==&lt;br /&gt;
&lt;br /&gt;
For most users it won&#039;t be necessary to go into installation and configuration details of the driver. Ubuntu 7.10 (Gutsy) provides a notification saying that there are restricted drivers available. You just have to go there (Restricted Drivers Manager) and enable the &amp;quot;ATI accelerated graphics driver&amp;quot;. Ubuntu will then install and configure the driver for you. If this does not provide the optimal solution you were looking for, please read ahead.&lt;br /&gt;
&lt;br /&gt;
===Method 1: Install the Driver the Ubuntu Way===&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo apt-get update	&lt;br /&gt;
sudo apt-get install linux-restricted-modules-generic restricted-manager&lt;br /&gt;
sudo apt-get install xorg-driver-fglrx&lt;br /&gt;
sudo depmod -a&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Note: The second line of the above may not be necessary.  If apt says it cannot find the &amp;quot;linux-restricted-modules&amp;quot; package, try line 3.  If that fails, check your sources.list (see top of page)&lt;br /&gt;
&lt;br /&gt;
If the system complains about dependencies, use your preferred package manager to download python2.4 and, if necessary, its dependencies.&lt;br /&gt;
&lt;br /&gt;
(Note: This method did not work with ATI X1300 Radeon on Gutsy whereas method 2 worked perfectly for us. 26/10/2007)&lt;br /&gt;
&lt;br /&gt;
===Method 2: Install the 8.42.3 Driver Manually===&lt;br /&gt;
&lt;br /&gt;
*Note: &#039;&#039;This is just an alternative installation method for the section above. It might help if you still get &#039;DRI missing&#039; errors.&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
Download the ATI driver installer:&lt;br /&gt;
[http://www2.ati.com/drivers/linux/ati-driver-installer-8.42.3-x86.x86_64.run ati-driver-installer-8.42.3-x86.x86_64.run] (this installer is for 32bit &#039;&#039;&#039;and&#039;&#039;&#039; 64bit systems)&lt;br /&gt;
&lt;br /&gt;
Change to the download directory.  Make sure that you have the &#039;&#039;universe&#039;&#039; and &#039;&#039;multiverse&#039;&#039; repositories enabled in &#039;&#039;/etc/apt/sources.list&#039;&#039; before doing these steps.  &lt;br /&gt;
&lt;br /&gt;
There is a detailed manual with screenshots at [https://wiki.ubuntu.com/AddingRepositoriesHowto Ubuntu Wiki].&lt;br /&gt;
&lt;br /&gt;
By default, Ubuntu did not enable the Universe and Multiverse repositories, but now in Gutsy, both Universe and Multiverse are activated by default.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Install necessary tools:&#039;&#039;&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo apt-get update&lt;br /&gt;
sudo apt-get install module-assistant build-essential fakeroot dh-make debhelper \&lt;br /&gt;
debconf libstdc++5 linux-headers-generic&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Create .deb packages:&#039;&#039; &lt;br /&gt;
&lt;br /&gt;
(don&#039;t use fakeroot ,&amp;quot;fakeroot: nested operation not yet supported&amp;quot;)&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo bash ati-driver-installer-8.42.3-x86.x86_64.run --buildpkg Ubuntu/gutsy&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Blacklist old fglrx module from linux-restricted-modules:&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
As Ubuntu Gutsy&#039;s &#039;&#039;linux-restricted-modules&#039;&#039; package includes the fglrx module from an old driver version (8.37.6), we have to blacklist this module to make sure the new kernel module which is needed by the new driver will be used instead.&lt;br /&gt;
&lt;br /&gt;
Ubuntu/Gnome users type in:&lt;br /&gt;
&amp;lt;pre&amp;gt;gksu gedit /etc/default/linux-restricted-modules-common&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Kubuntu/KDE users type in:&lt;br /&gt;
&amp;lt;pre&amp;gt;kdesu kate /etc/default/linux-restricted-modules-common&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Add &amp;quot;fglrx&amp;quot; to the line &amp;quot;DISABLED_MODULES&amp;quot;&lt;br /&gt;
{{Box File|/etc/default/linux-restricted-modules-common|&lt;br /&gt;
&amp;lt;pre&amp;gt;DISABLED_MODULES=&amp;quot;fglrx&amp;quot;&amp;lt;/pre&amp;gt;&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Install .deb packages:&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo dpkg -i xorg-driver-fglrx_8.42.3-1*.deb \&lt;br /&gt;
fglrx-kernel-source_8.42.3-1*.deb \&lt;br /&gt;
fglrx-amdcccle_8.42.3-1*.deb&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
*Note: If you get a &#039;Bad file descriptor&#039; message concerning the xorg.conf file try switching user to root and repeating the same command without sudo. This might be valid for the following commands too. (Ubuntu Gutsy installs with no password set for root by default. You can set a password for the root by typing &#039;sudo passwd root&#039; first.)&lt;br /&gt;
&lt;br /&gt;
*Note: If you have a 64 bit install, the above dpkg command will likely complain that &amp;quot;Errors were encountered while processing: fglrx-amdcccle&amp;quot;.  This is because of a dependency of the amdccle package on 32 bit libraries.  If you recieve this error, issue the following command after the above dpkg command, which will force the installation of all of the 32 bit dependencies, and then the amdccle pacakge:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo apt-get install -f&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Remove any old fglrx debs from /usr/src/:&#039;&#039;&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo rm /usr/src/fglrx-kernel*.deb&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Fix broken dependencies&#039;&#039;&lt;br /&gt;
*Note: &#039;&#039;You only need to do this if you have installed previous versions of these drivers using this method before.&#039;&#039;&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo apt-get -f install&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Compile the kernel module:&#039;&#039;&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo module-assistant prepare,update&lt;br /&gt;
sudo module-assistant build,install fglrx -f&lt;br /&gt;
sudo depmod -a&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
It&#039;s necessary, because sometimes this file is written by other packages, and so there&#039;s no 3D acceleration.&lt;br /&gt;
Check that the file /lib/modules/$(uname -r)/misc/fglrx.ko has been created.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Create the following folder&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo mkdir /lib/modules/$(uname -r)/volatile&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Note: the volatile directory might already exist at this stage then simply continue with the next step. &lt;br /&gt;
&lt;br /&gt;
&#039;&#039;Create a symbolic link&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo ln -sf /lib/modules/$(uname -r)/misc/fglrx.ko /lib/modules/$(uname -r)/volatile/fglrx.ko&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
NOTE : On my Gutsy install, after a reboot this link was always removed automatically leaving me without an fglrx module loaded, and thus no ATI rendering. There are different ways to succesfully do the job, but I personally tested this method on more than 5 pc and went ok.&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo gedit_or_kate /etc/init.d/gdm_or_kdm&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
copy this line at the beginning on top of the command &amp;quot;set 0&amp;quot;&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
ln -s /lib/modules/2.6.22-14-generic/misc/fglrx.ko /lib/modules/2.6.22-14-generic/volatile/&lt;br /&gt;
modprobe fglrx&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;IMPORTANT&#039;&#039;&#039;: You have to recompile the kernel module after each kernel update! &lt;br /&gt;
(Note: This does not affect you until the next time you update your kernel.)&lt;br /&gt;
&lt;br /&gt;
===Configure the Driver===&lt;br /&gt;
*Note Method 2 Users: Before you carry out this step you must reboot your machine. Or else the fglrx driver will not be in use on xorg.conf and using the aticonfig options will cause a memory dump and not intialise the Driver properly.&lt;br /&gt;
*Note: An &#039;&#039;&#039;alternative&#039;&#039;&#039; to the &#039;&#039;&#039;aticonfig --initial&#039;&#039;&#039; command is to edit &#039;&#039;/etc/X11/xorg.conf&#039;&#039; and replace the string &amp;quot;ati&amp;quot; with &amp;quot;fglrx&amp;quot; in the &amp;quot;Device&amp;quot; section. This way you won&#039;t lose your old &amp;quot;Screen&amp;quot; and &amp;quot;Monitor&amp;quot; settings. Afterwards you can use aticonfig for setting overlay etc. Another alternative is &#039;&#039;&#039;aticonfig --initial --force&#039;&#039;&#039; if you encounter issues with the first command.&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo aticonfig --initial&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
Then:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo aticonfig --overlay-type=Xv&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
*Note: Is there an alternative to the previous step?&lt;br /&gt;
&lt;br /&gt;
===Finish the Installation===&lt;br /&gt;
Now save any open document and reboot your system:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo shutdown -r now&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
*Note: An &#039;&#039;&#039;alternative&#039;&#039;&#039; to rebooting is to restart the X Server by pressing your CTRL ALT BACKSPACE keys. You must remove any old kernel modules such as &amp;quot;drm&amp;quot; &amp;quot;radeon&amp;quot; or &amp;quot;fglrx&amp;quot; using the &amp;quot;rmmod&amp;quot; command. Example: &amp;lt;code&amp;gt;sudo rmmod fglrx&amp;lt;/code&amp;gt;&lt;br /&gt;
&lt;br /&gt;
== Post-Installation Checks ==&lt;br /&gt;
===Verifying===&lt;br /&gt;
Run the following command to check its output to ensure the fglrx driver is installed properly:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
$ fglrxinfo&lt;br /&gt;
display: :0.0  screen: 0&lt;br /&gt;
OpenGL vendor string: ATI Technologies Inc.&lt;br /&gt;
OpenGL renderer string: ATI Radeon Xpress Series&lt;br /&gt;
OpenGL version string: 2.0.6958 Release&lt;br /&gt;
&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
The &amp;lt;code&amp;gt;OpenGL vendor string&amp;lt;/code&amp;gt; should read &#039;&#039;&#039;ATI&#039;&#039;&#039; and not &#039;&#039;&#039;Mesa&#039;&#039;&#039;.&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;If it still says &#039;&#039;Mesa&#039;&#039; and not &#039;&#039;ATI&#039;&#039;, even after re-enabling the driver from the Restricted-manager:&#039;&#039;&#039;&lt;br /&gt;
You can try the following:&lt;br /&gt;
:*Remove all the packages provided by the &amp;lt;code&amp;gt;xserver-xorg-video-all&amp;lt;/code&amp;gt; meta-package (search for it using Synaptic or Adept), then restart the machine. The X Server should now use the new fglrx driver by force (provided the driver is being used in &#039;&#039;xorg.conf&#039;&#039;).&lt;br /&gt;
::If you can&#039;t log in after this, you&#039;ll have to log in to a terminal in the login screen, and reinstall the &amp;lt;code&amp;gt;xserver-xorg-video-all&amp;lt;/code&amp;gt; package. Your problem is probably somewhere else. (taken from [http://ubuntuforums.org/showpost.php?p=3655658&amp;amp;postcount=139]).&lt;br /&gt;
&lt;br /&gt;
&#039;&#039;&#039;If it says &#039;&#039; libGL.so.1: cannot open shared object file: No such file or directory&#039;&#039;...&#039;&#039;&#039;&lt;br /&gt;
Check if you have a &#039;&#039;/usr/lib/libGL.so.1.2&#039;&#039;, if so do this:&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo ln -s /usr/lib/libGL.so.1.2 /usr/lib/libGL.so.1&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
If you see a message like &amp;quot;Xlib: extension &amp;quot;XFree86-DRI&amp;quot; missing on display &amp;quot;:0.0&amp;quot;.&amp;quot; you may simply need to enable the restricted drivers.&lt;br /&gt;
&lt;br /&gt;
Ubuntu and Kubuntu use a Restricted-Driver manager to load/unload non-FOSS drivers. Even if they are installed and specified in the xorg.conf does not mean they&#039;ll load properly. &lt;br /&gt;
&lt;br /&gt;
To start the restricted manager in both Ubuntu &amp;amp; Kbuntu:&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo /usr/bin/restricted-manager&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
If you check the box to enable the restricted driver and reboot, it should work.&lt;br /&gt;
&lt;br /&gt;
=== 3D desktop effects ===&lt;br /&gt;
The new ATI drivers use AIGLX so there is not need to install XGL that older drivers (&amp;lt; 8.40) required.&lt;br /&gt;
&lt;br /&gt;
Remove this section from to the /etc/X11/xorg.conf file.&lt;br /&gt;
The new xorg server enables &amp;quot;Composite&amp;quot; by default.&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
# Section &amp;quot;Extensions&amp;quot;&lt;br /&gt;
#        Option  &amp;quot;Composite&amp;quot; &amp;quot;0&amp;quot;&lt;br /&gt;
# EndSection&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Compiz does not know about the fglrx driver. You can either skip the checks&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;mkdir -p ~/.config/compiz &amp;amp;&amp;amp; echo SKIP_CHECKS=yes &amp;gt;&amp;gt; ~/.config/compiz/compiz-manager&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
or add it to the compiz white list, and clear the blacklist pci Ids variable &#039;&#039;&#039;*Recommended*&#039;&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo gedit /usr/bin/compiz&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
# Driver whitelist&lt;br /&gt;
WHITELIST=&amp;quot;fglrx nvidia intel ati radeon i810&amp;quot;&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
# blacklist based on the pci ids &lt;br /&gt;
# BLACKLIST_PCIIDS=&amp;quot;$T&amp;quot;&lt;br /&gt;
BLACKLIST_PCIIDS=&amp;quot;&amp;quot;&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
After the necessary configurations, just restart X and enjoy the cool effects.&lt;br /&gt;
&lt;br /&gt;
For Kubuntu you need some extra steps:&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
sudo apt-get install compiz compiz-kde compizconfig-settings-manager compiz-core compiz-fusion-plugins-main compiz-plugins&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
To test 3D Effects, press ALT+F2 and type &amp;quot;compiz --replace&amp;quot;.&lt;br /&gt;
&lt;br /&gt;
To configure use the tool KMenu-&amp;gt;Settings-&amp;gt;Avanced Desktop Effect Settings.&lt;br /&gt;
&lt;br /&gt;
=== Additional configure with aticonfig tool ===&lt;br /&gt;
You can configure the driver even further with the &#039;&#039;&#039;aticonfig&#039;&#039;&#039; tool, more information can be found at [[Configuring]].&lt;br /&gt;
&lt;br /&gt;
For example: &amp;lt;br&amp;gt;&lt;br /&gt;
* use powerplay option to switch power state for battery friendly or performance mode&lt;br /&gt;
* use dual head or one big desktop mode &lt;br /&gt;
* turn second monitor on/off on the fly&lt;br /&gt;
&lt;br /&gt;
==Ubuntu-specific Issues==&lt;br /&gt;
&lt;br /&gt;
=== If installing on Ubuntu x64... ===&lt;br /&gt;
&lt;br /&gt;
(thanks to Michael at Phoronix forums and aolana at Ubuntuforums.org)&lt;br /&gt;
&lt;br /&gt;
Building packages for Ubuntu 64-Bit is known to be broken. If you&#039;re installing on Ubuntu 64-Bit, do this:&lt;br /&gt;
&lt;br /&gt;
Download this: [http://www.michaellarabel.com/downloads/fglrx-8.42-ubuntu+debian-2.tar.bz2 fglrx-8.42-ubuntu+debian-2.tar.bz2]&lt;br /&gt;
&lt;br /&gt;
Extract the installer:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
bash ati-driver-installer-8.42.3-x86.x86_64.run --extract somedirectory&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Extract the archive you downloaded to the directory that you extracted the driver&#039;s installation files to.&lt;br /&gt;
&lt;br /&gt;
Then build the package:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;&lt;br /&gt;
./ati-installer.sh 8.42.3 --buildpkg Ubuntu/gutsy&lt;br /&gt;
&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== Revert to Xorg driver ===&lt;br /&gt;
&lt;br /&gt;
If (for any reason) the fglrx install fails, you can revert to the Xorg driver by executing&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo dpkg-reconfigure xserver-xorg&amp;lt;/pre&amp;gt;&lt;br /&gt;
and selecting the &amp;quot;ati&amp;quot; driver, or simply restoring the previous /etc/X11/xorg.conf file, if you made a backup. &lt;br /&gt;
&lt;br /&gt;
You also need to remove the xorg-driver-fglrx or your manually installed drivers to get the 3D acceleration back, since it is provided by file /usr/lib/libGL.so.1.2 which belongs to libgl1-mesa package and which is moved to backup and replaced at the installation of xorg-driver-fglrx (or the manually built) package. In case the removal of the fglrx drivers fails to restore the file from libgl1-mesa, you have to reinstall the package by running:&lt;br /&gt;
&lt;br /&gt;
&amp;lt;pre&amp;gt;sudo apt-get install --reinstall libgl1-mesa&amp;lt;/pre&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== Attention: Suspend/Hibernation will not work===&lt;br /&gt;
&lt;br /&gt;
With Gutsy release, there&#039;s a big problem using the ATI proprietary drivers. The Suspend/Hibernate function will stop working.&lt;br /&gt;
The problem is due to the new SLUB allocator incorporated in 2.6.22 / 2.6.23 Kernel. &lt;br /&gt;
There are no workaround, except:&lt;br /&gt;
&lt;br /&gt;
- Return to Feisty (with 2.6.20 kernel, and apply specific solutions: see Feisty installation guide).&lt;br /&gt;
&lt;br /&gt;
- Use default Mesa Drivers (the easiest way is to disable ATI driver from Restricted Driver Manager).&lt;br /&gt;
&lt;br /&gt;
- Recompiler your Kernel to use SLAB.&lt;br /&gt;
&lt;br /&gt;
Unfortunately some new ATI cards couldn&#039;t start X with Mesa drivers, so the only workaround is returning to Feisty.&lt;br /&gt;
&lt;br /&gt;
The problem will be solved in the next ATI driver release.&lt;br /&gt;
&lt;br /&gt;
===If you get  /usr/X11R6/lib/modules/dri/fglrx_dri.so not found===&lt;br /&gt;
&lt;br /&gt;
 sudo ln -s /usr/lib/ /usr/X11R6/lib/modules&lt;br /&gt;
&lt;br /&gt;
=== libGL error ===&lt;br /&gt;
* fglrxinfo gives:  libGL.so.1: cannot open shared object file.&lt;br /&gt;
* Fixed with command:&lt;br /&gt;
 sudo ln -s /usr/lib/libGL.so.1.2 /usr/lib/libGL.so.1&lt;br /&gt;
&lt;br /&gt;
==See Also==&lt;br /&gt;
*[[Frequently Asked Questions]]&lt;br /&gt;
*[[Performance Issues]]&lt;br /&gt;
*[[Troubleshooting]]&lt;br /&gt;
&lt;br /&gt;
[[Category:Installation Documentation]]&lt;/div&gt;</summary>
		<author><name>85.18.136.90</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Talk:8.39.4&amp;diff=4110</id>
		<title>Talk:8.39.4</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Talk:8.39.4&amp;diff=4110"/>
		<updated>2007-07-28T09:48:07Z</updated>

		<summary type="html">&lt;p&gt;85.18.136.65: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;where is this driver ?? download work ?&lt;br /&gt;
&lt;br /&gt;
== does is work?!...  yes!!!  ==&lt;br /&gt;
&lt;br /&gt;
is it another fakie driver?!...the walktrough guide for ubuntu 7.04 is still linking the 8.38.7&lt;br /&gt;
who knows something about that???!!!&lt;br /&gt;
:This is not a fake driver. This is the final version. The walk through will still work regardless of the driver version. -[[User:Mooninite|Mooninite]] 15:23, 26 July 2007 (CDT)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
thank you for the answer! :-)&lt;br /&gt;
i know it&#039;s not a fakie driver...joking&lt;br /&gt;
&lt;br /&gt;
by the way thank you also for the guides...good work&lt;/div&gt;</summary>
		<author><name>85.18.136.65</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Talk:8.39.4&amp;diff=4109</id>
		<title>Talk:8.39.4</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Talk:8.39.4&amp;diff=4109"/>
		<updated>2007-07-28T09:47:44Z</updated>

		<summary type="html">&lt;p&gt;85.18.136.65: /* does is work?! */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;where is this driver ?? download work ?&lt;br /&gt;
&lt;br /&gt;
== does is work?! == yes!!!&lt;br /&gt;
&lt;br /&gt;
is it another fakie driver?!...the walktrough guide for ubuntu 7.04 is still linking the 8.38.7&lt;br /&gt;
who knows something about that???!!!&lt;br /&gt;
:This is not a fake driver. This is the final version. The walk through will still work regardless of the driver version. -[[User:Mooninite|Mooninite]] 15:23, 26 July 2007 (CDT)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
thank you for the answer! :-)&lt;br /&gt;
i know it&#039;s not a fakie driver...joking&lt;br /&gt;
&lt;br /&gt;
by the way thank you also for the guides...good work&lt;/div&gt;</summary>
		<author><name>85.18.136.65</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Talk:8.39.4&amp;diff=4108</id>
		<title>Talk:8.39.4</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Talk:8.39.4&amp;diff=4108"/>
		<updated>2007-07-28T09:47:18Z</updated>

		<summary type="html">&lt;p&gt;85.18.136.65: /* does is work?! */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;where is this driver ?? download work ?&lt;br /&gt;
&lt;br /&gt;
== does is work?! ==&lt;br /&gt;
&lt;br /&gt;
is it another fakie driver?!...the walktrough guide for ubuntu 7.04 is still linking the 8.38.7&lt;br /&gt;
who knows something about that???!!!&lt;br /&gt;
:This is not a fake driver. This is the final version. The walk through will still work regardless of the driver version. -[[User:Mooninite|Mooninite]] 15:23, 26 July 2007 (CDT)&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
thank you for the answer! :-)&lt;br /&gt;
i know it&#039;s not a fakie driver...joking&lt;br /&gt;
&lt;br /&gt;
by the way thank you also for the guides...good work&lt;/div&gt;</summary>
		<author><name>85.18.136.65</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Talk:8.39.4&amp;diff=4107</id>
		<title>Talk:8.39.4</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Talk:8.39.4&amp;diff=4107"/>
		<updated>2007-07-28T09:46:40Z</updated>

		<summary type="html">&lt;p&gt;85.18.136.65: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;where is this driver ?? download work ?&lt;br /&gt;
&lt;br /&gt;
== does is work?! ==&lt;br /&gt;
&lt;br /&gt;
is it another fakie driver?!...the walktrough guide for ubuntu 7.04 is still linking the 8.38.7&lt;br /&gt;
who knows something about that???!!!&lt;br /&gt;
:This is not a fake driver. This is the final version. The walk through will still work regardless of the driver version. -[[User:Mooninite|Mooninite]] 15:23, 26 July 2007 (CDT)&lt;br /&gt;
&lt;br /&gt;
thank you for the answer! :-)&lt;br /&gt;
i know it&#039;s not a fakie driver...joking&lt;br /&gt;
&lt;br /&gt;
by the way thank also for the guides...good work&lt;/div&gt;</summary>
		<author><name>85.18.136.65</name></author>
	</entry>
	<entry>
		<id>http://wiki.cchtml.com/index.php?title=Talk:8.39.4&amp;diff=4105</id>
		<title>Talk:8.39.4</title>
		<link rel="alternate" type="text/html" href="http://wiki.cchtml.com/index.php?title=Talk:8.39.4&amp;diff=4105"/>
		<updated>2007-07-26T19:05:36Z</updated>

		<summary type="html">&lt;p&gt;85.18.136.65: does is work?!&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;where is this driver ?? download work ?&lt;br /&gt;
&lt;br /&gt;
== does is work?! ==&lt;br /&gt;
&lt;br /&gt;
is it another fakie driver?!...the walktrough guide for ubuntu 7.04 is still linking the 8.38.7&lt;br /&gt;
who knows something about that???!!!&lt;/div&gt;</summary>
		<author><name>85.18.136.65</name></author>
	</entry>
</feed>