Slackware Installation Guide - Revision history

Mooninite: Protected "Slackware Installation Guide": Excessive spamming ([edit=autoconfirmed] (indefinite) [move=autoconfirmed] (indefinite))

2012-05-16T02:44:46Z

Protected "Slackware Installation Guide": Excessive spamming ([edit=autoconfirmed] (indefinite) [move=autoconfirmed] (indefinite))

← Older revision	Revision as of 02:44, 16 May 2012
(No difference)

Mooninite: Reverted edits by 207.191.187.21 (talk) to last revision by Mooninite

2012-05-16T02:43:26Z

Reverted edits by 207.191.187.21 (talk) to last revision by Mooninite

← Older revision		Revision as of 02:43, 16 May 2012
Line 1:		Line 1:
	I use ~~ubuntu~~, and ~~veilortcnux~~(~~dual~~ -~~boot~~)~~Ubuntu is awesome~~. ~~Email me at~~ if you have ~~any questions~~. I'~~m happy~~ to ~~answer~~. ~~what~~'s ~~your sound card~~. ~~email me~~. I'll ~~try to help~~.		First, note that I don't like kernel 2.4, and don't use it. Therefore this FAQ will for the most part assume you've updated your kernels along with the rest of us. (By default, Slackware 10.2 ships with 2.4.30). This shouldn't cause any descrepencies, as fglrx will work with a 2.4 or 2.6 kernel; however, if you can't get acceleration on the older kernel series, my suggestion is to update! My own reasons for doing so are mainly stability related; having relatively modern hardware, the previous-gen kernel just doesn't like my computer very much. But now I digress...let's get to it.

			First and foremost; check [http://www.linuxpackages.net www.linuxpackages.net]. In theory, they have a man there who beta-tests and packages flgrx for Slackware. In practice, fglrx hasn't been updated on that site, as of this writing (2005-11-12), since Slackware 10.1 and fglrx 8.16. Still, there's always the off-chance that the slacker (pun not intended...okay, maybe it was ;) has updated them; so check there first, and use them if they are up-to-date. They can be installed quite simply.

			installpkg ati-fglrx*.tgz

			Now follow the below procedure.

			Please keep in mind that you'll need your kernel source and kernel headers installed. So if you're like me custom compile the kernel, then you're fine. If you get a pre-built one (anything from the Slackware site, or anything that comes with a default slackware install), then you're going to have to download the corresponding source code. Version numbers must match exactly; also, you must have GCC 3.3 libraries installed (if you've upgraded to GCC 3.4, make sure cxxlibs is installed).

			So, assuming you've got the relevant file from the ATI site, let's install this sucker.

			rpm2targz fglrx.rpm ( or rpm2tgz fglrx.rpm to get a .tgz file that pkgtools can install )
			tar -xvzf fglrx*.tar.gz -C /
			cd /lib/modules/fglrx/build_mod
			sh make.sh
			sh ../make_install.sh
			aticonfig --initial

			Now, add this line to /etc/fstab

			tmpfs /dev/shm tmpfs defaults 0 0

			And just reboot:

			reboot

			After that, you're golden. Or should be, at least. Verify you've got hardware rendering by typing in:

			fglrxinfo

			If it says yes,then use the [http://www.ukulc.com/ language translation] and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. So, good luck with your wanderings, Slacker!

			[[Category:Installation Documentation]]

207.191.187.21: QBznXhqHJAgP

2012-05-16T00:32:20Z

QBznXhqHJAgP

← Older revision		Revision as of 00:32, 16 May 2012
Line 1:		Line 1:
	~~First, note that~~ I ~~don't like kernel 2.4, and don't~~ use ~~it. Therefore this FAQ will for the most part assume you've updated your kernels along with the rest of us. (By default~~, Slackware 10.2 ships with 2.4.30). This shouldn't cause any descrepencies, as fglrx will work with a 2.4 or 2.6 kernel; however, if you can't get acceleration on the older kernel series, my suggestion is to update! My own reasons for doing so are mainly stability related; having relatively modern hardware, the previous-gen kernel just doesn't like my computer very much. But now I digress...let's get to it.		I use ubuntu, and veilortcnux(dual -boot)Ubuntu is awesome. Email me at if you have any questions. I'm happy to answer. what's your sound card. email me. I'll try to help.

	~~First~~ and foremost; check [http://www.linuxpackages.net www.linuxpackages.net]. In theory, they have a man there who beta-tests and packages flgrx for Slackware. In practice, fglrx hasn't been updated on that site, as of this writing (~~2005-11~~-12)~~, since Slackware 10~~.1 and fglrx 8.16. Still, there's always the off-chance that the slacker (pun not intended...okay, maybe it was ;) has updated them; so check there first, and use them if they are up-to-date. They can be installed quite simply.

	~~installpkg ati-fglrx*.tgz~~

	~~Now follow the below procedure.~~

	~~Please keep in mind that you'll need your kernel source and kernel headers installed. So~~ if you~~'re like me custom compile the kernel, then you're fine. If you get a pre-built one (anything from the Slackware site, or anything that comes with a default slackware install), then you're going to~~ have ~~to download the corresponding source code~~. ~~Version numbers must match exactly; also, you must have GCC 3.3 libraries installed (if you~~'~~ve upgraded~~ to ~~GCC 3~~.~~4, make sure cxxlibs is installed).~~

	~~So, assuming you've got the relevant file from the ATI site, let~~'s ~~install this sucker~~.

	~~rpm2targz fglrx.rpm ( or rpm2tgz fglrx.rpm to get a .tgz file that pkgtools can install )~~
	~~tar -xvzf fglrx*.tar.gz -C /~~
	~~cd /lib/modules/fglrx/build_mod~~
	~~sh make.sh~~
	~~sh ../make_install.sh~~
	~~aticonfig --initial~~

	~~Now, add this line to /etc/fstab~~

	~~tmpfs /dev/shm tmpfs defaults 0 0~~

	~~And just reboot:~~

	~~reboot~~

	~~After that, you're golden. Or should be, at least. Verify you've got hardware rendering by typing in:~~

	~~fglrxinfo~~

	If it says yes,then use the [http://www.ukulc.com/ language translation] and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. ~~So, good luck with your wanderings, Slacker!~~

	~~[[Category:Installation Documentation]]~~

Mooninite: Protected "Slackware Installation Guide": Excessive vandalism ([edit=autoconfirmed] (expires 04:04, 30 March 2012 (UTC)) [move=autoconfirmed] (expires 04:04, 30 March 2012 (UTC)))

2012-03-01T05:04:46Z

Protected "Slackware Installation Guide": Excessive vandalism ([edit=autoconfirmed] (expires 04:04, 30 March 2012 (UTC)) [move=autoconfirmed] (expires 04:04, 30 March 2012 (UTC)))

← Older revision	Revision as of 05:04, 1 March 2012
(No difference)

Mooninite: Reverted edits by 69.163.243.64 (talk) to last revision by Mooninite

2012-03-01T05:04:29Z

Reverted edits by 69.163.243.64 (talk) to last revision by Mooninite

← Older revision		Revision as of 05:04, 1 March 2012
Line 1:		Line 1:
	~~Benutzt Mozilla Firefox~~ 2.0.0.~~3 auf Windows XPHab gedrae auch einen neuen PC gebaut~~ (~~Spiele PC f r den Bruder mit nForce 520 und GF8800 GTS320~~) ~~Ich hab einen 5000+ mit 65nm genommen~~. ~~Die Modelle mit 2MB L2 Cache sind nicht zu empfehlen~~. ~~Die verbrauchen erheblich mehr Strom~~, ~~sie werden w rmer~~, ~~sie kosten mehr Geld~~ (~~auch wenn nicht wirklich viel mehr~~) ~~und sie bringen kaum Mehrleistung~~. ~~Also nimm am besten den 5000+ oder den 5400+~~ .~~Mein Vater nutzt ein Mobo mit GF6100~~. ~~Selbst seine CAD Programme lassen sich~~ (~~bei nicht allzu vielen Teilen~~) ~~gut und fl ssig bedienen~~. ~~F r relativ anspruchslose Dinge wie Aero oder Beryl~~ (~~meinetwegen auch XGL~~) ~~d rfte die auch reichen~~. ~~Das mit dem RAM ist aber wiederum ein Argument~~.		First, note that I don't like kernel 2.4, and don't use it. Therefore this FAQ will for the most part assume you've updated your kernels along with the rest of us. (By default, Slackware 10.2 ships with 2.4.30). This shouldn't cause any descrepencies, as fglrx will work with a 2.4 or 2.6 kernel; however, if you can't get acceleration on the older kernel series, my suggestion is to update! My own reasons for doing so are mainly stability related; having relatively modern hardware, the previous-gen kernel just doesn't like my computer very much. But now I digress...let's get to it.

			First and foremost; check [http://www.linuxpackages.net www.linuxpackages.net]. In theory, they have a man there who beta-tests and packages flgrx for Slackware. In practice, fglrx hasn't been updated on that site, as of this writing (2005-11-12), since Slackware 10.1 and fglrx 8.16. Still, there's always the off-chance that the slacker (pun not intended...okay, maybe it was ;) has updated them; so check there first, and use them if they are up-to-date. They can be installed quite simply.

			installpkg ati-fglrx*.tgz

			Now follow the below procedure.

			Please keep in mind that you'll need your kernel source and kernel headers installed. So if you're like me custom compile the kernel, then you're fine. If you get a pre-built one (anything from the Slackware site, or anything that comes with a default slackware install), then you're going to have to download the corresponding source code. Version numbers must match exactly; also, you must have GCC 3.3 libraries installed (if you've upgraded to GCC 3.4, make sure cxxlibs is installed).

			So, assuming you've got the relevant file from the ATI site, let's install this sucker.

			rpm2targz fglrx.rpm ( or rpm2tgz fglrx.rpm to get a .tgz file that pkgtools can install )
			tar -xvzf fglrx*.tar.gz -C /
			cd /lib/modules/fglrx/build_mod
			sh make.sh
			sh ../make_install.sh
			aticonfig --initial

			Now, add this line to /etc/fstab

			tmpfs /dev/shm tmpfs defaults 0 0

			And just reboot:

			reboot

			After that, you're golden. Or should be, at least. Verify you've got hardware rendering by typing in:

			fglrxinfo

			If it says yes,then use the [http://www.ukulc.com/ language translation] and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. So, good luck with your wanderings, Slacker!

			[[Category:Installation Documentation]]

69.163.243.64: XrXRmNsfDLXA

2012-03-01T03:31:57Z

XrXRmNsfDLXA

← Older revision		Revision as of 03:31, 1 March 2012
Line 1:		Line 1:
	~~First, note that I don't like kernel~~ 2.~~4, and don't use it~~. ~~Therefore this FAQ will for the most part assume you've updated your kernels along with the rest of us~~. (~~By default, Slackware 10.2 ships with 2.4.30~~). ~~This shouldn't cause any descrepencies, as fglrx will work with a 2~~.~~4 or 2.6 kernel; however, if you can't get acceleration on the older kernel series~~, ~~my suggestion is to update! My own reasons for doing so are mainly stability related; having relatively modern hardware~~, ~~the previous-gen kernel just doesn't like my computer very much. But now I digress...let's get to it.~~		Benutzt Mozilla Firefox 2.0.0.3 auf Windows XPHab gedrae auch einen neuen PC gebaut (Spiele PC f r den Bruder mit nForce 520 und GF8800 GTS320) Ich hab einen 5000+ mit 65nm genommen. Die Modelle mit 2MB L2 Cache sind nicht zu empfehlen. Die verbrauchen erheblich mehr Strom, sie werden w rmer, sie kosten mehr Geld (auch wenn nicht wirklich viel mehr) und sie bringen kaum Mehrleistung. Also nimm am besten den 5000+ oder den 5400+ .Mein Vater nutzt ein Mobo mit GF6100. Selbst seine CAD Programme lassen sich (bei nicht allzu vielen Teilen) gut und fl ssig bedienen. F r relativ anspruchslose Dinge wie Aero oder Beryl (meinetwegen auch XGL) d rfte die auch reichen. Das mit dem RAM ist aber wiederum ein Argument.

	First and foremost; check [http://www.linuxpackages.net www.linuxpackages.net]. In theory, they have a man there who beta-tests and packages flgrx for Slackware. In practice, fglrx hasn't been updated on that site, as of this writing (~~2005-11-12~~)~~, since Slackware 10~~.~~1 and fglrx 8~~.16. ~~Still, there's always the off-chance that the slacker~~ (~~pun not intended...okay, maybe it was ;~~) ~~has updated them; so check there first, and use them if they are up-to-date. They can be installed quite simply.~~

	~~installpkg ati-fglrx*.tgz~~

	~~Now follow the below procedure.~~

	~~Please keep in mind that you'll need your kernel source and kernel headers installed~~. ~~So if you're like me custom compile the kernel, then you're fine. If you get a pre-built one~~ (~~anything from the Slackware site, or anything that comes with a default slackware install~~)~~, then you're going to have to download the corresponding source code~~. ~~Version numbers must match exactly; also, you must have GCC 3.3 libraries installed (if you've upgraded to GCC 3~~.~~4, make sure cxxlibs is installed).~~

	~~So, assuming you've got the relevant file from the ATI site, let's install this sucker.~~

	~~rpm2targz fglrx.rpm ( or rpm2tgz fglrx.rpm to get a .tgz file that pkgtools can install )~~
	~~tar -xvzf fglrx*.tar.gz -C /~~
	~~cd /lib/modules/fglrx/build_mod~~
	~~sh make.sh~~
	~~sh ../make_install.sh~~
	~~aticonfig --initial~~

	~~Now, add this line to /etc/fstab~~

	~~tmpfs /dev/shm tmpfs defaults 0 0~~

	~~And just reboot:~~

	~~reboot~~

	~~After that, you're golden. Or should be, at least. Verify you've got hardware rendering by typing in:~~

	~~fglrxinfo~~

	If it says yes,then use the [http://www.ukulc.com/ language translation] and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. So, good luck with your wanderings, Slacker!

	~~[[Category:Installation Documentation]]~~

Mooninite: Reverted edits by 210.187.102.131 (talk) to last revision by Mooninite

2012-02-28T03:59:47Z

Reverted edits by 210.187.102.131 (talk) to last revision by Mooninite

← Older revision		Revision as of 03:59, 28 February 2012
Line 1:		Line 1:
	If you ~~have poerlbms~~ with a ~~too noisy fan~~:~~PutOption "ClockGating" "~~on~~"Option "ForceLowPowerMode" "on"~~in your ~~xorg~~.~~conf~~.~~But KMS~~ (~~Kernel Mode Switching~~) must ~~be disabled~~, this can be ~~done viaoptions radeon modeset=0in~~ /~~etc~~/~~modprobe~~.d/~~radeon-kms~~.~~conf~~		First, note that I don't like kernel 2.4, and don't use it. Therefore this FAQ will for the most part assume you've updated your kernels along with the rest of us. (By default, Slackware 10.2 ships with 2.4.30). This shouldn't cause any descrepencies, as fglrx will work with a 2.4 or 2.6 kernel; however, if you can't get acceleration on the older kernel series, my suggestion is to update! My own reasons for doing so are mainly stability related; having relatively modern hardware, the previous-gen kernel just doesn't like my computer very much. But now I digress...let's get to it.

			First and foremost; check [http://www.linuxpackages.net www.linuxpackages.net]. In theory, they have a man there who beta-tests and packages flgrx for Slackware. In practice, fglrx hasn't been updated on that site, as of this writing (2005-11-12), since Slackware 10.1 and fglrx 8.16. Still, there's always the off-chance that the slacker (pun not intended...okay, maybe it was ;) has updated them; so check there first, and use them if they are up-to-date. They can be installed quite simply.

			installpkg ati-fglrx*.tgz

			Now follow the below procedure.

			Please keep in mind that you'll need your kernel source and kernel headers installed. So if you're like me custom compile the kernel, then you're fine. If you get a pre-built one (anything from the Slackware site, or anything that comes with a default slackware install), then you're going to have to download the corresponding source code. Version numbers must match exactly; also, you must have GCC 3.3 libraries installed (if you've upgraded to GCC 3.4, make sure cxxlibs is installed).

			So, assuming you've got the relevant file from the ATI site, let's install this sucker.

			rpm2targz fglrx.rpm ( or rpm2tgz fglrx.rpm to get a .tgz file that pkgtools can install )
			tar -xvzf fglrx*.tar.gz -C /
			cd /lib/modules/fglrx/build_mod
			sh make.sh
			sh ../make_install.sh
			aticonfig --initial

			Now, add this line to /etc/fstab

			tmpfs /dev/shm tmpfs defaults 0 0

			And just reboot:

			reboot

			After that, you're golden. Or should be, at least. Verify you've got hardware rendering by typing in:

			fglrxinfo

			If it says yes,then use the [http://www.ukulc.com/ language translation] and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. So, good luck with your wanderings, Slacker!

			[[Category:Installation Documentation]]

210.187.102.131: Undo revision 6417 by Arisjack (talk)

2012-02-28T02:15:11Z

Undo revision 6417 by Arisjack (talk)

← Older revision		Revision as of 02:15, 28 February 2012
Line 1:		Line 1:
	~~First, note that I don't like kernel 2.4, and don't use it. Therefore this FAQ will for the most part assume~~ you~~'ve updated your kernels along with the rest of us. (By default, Slackware 10.2 ships with 2.4.30). This shouldn't cause any descrepencies, as fglrx will work~~ with a ~~2.4 or 2.6 kernel; however, if you can't get acceleration~~ on the older kernel series, my suggestion is to update! My own reasons for doing so are mainly stability related; having relatively modern hardware, the previous-gen kernel just doesn't like my computer very much. But now I digress...let's get to it.		If you have poerlbms with a too noisy fan:PutOption "ClockGating" "on"Option "ForceLowPowerMode" "on"in your xorg.conf.But KMS (Kernel Mode Switching) must be disabled, this can be done viaoptions radeon modeset=0in /etc/modprobe.d/radeon-kms.conf

	~~First and foremost; check [http://www.linuxpackages.net www.linuxpackages.net]. In theory, they have a man there who beta-tests and packages flgrx for Slackware. In practice, fglrx hasn't been updated~~ on that site, as of this writing (2005-11-12), since Slackware 10.1 and fglrx 8.16. Still, there's always the off-chance that the slacker (pun not intended...okay, maybe it was ;) has updated them; so check there first, and use them if they are up-to-date. They can be installed quite simply.

	~~installpkg ati-fglrx*.tgz~~

	~~Now follow the below procedure.~~

	~~Please keep~~ in ~~mind that you'll need~~ your ~~kernel source and kernel headers installed~~. ~~So if you're like me custom compile the kernel, then you're fine~~. ~~If you get a pre-built one~~ (~~anything from the Slackware site, or anything that comes with a default slackware install~~)~~, then you're going to have to download the corresponding source code. Version numbers~~ must ~~match exactly; also, you must have GCC 3.3 libraries installed (if you've upgraded to GCC 3.4~~, ~~make sure cxxlibs is installed).~~

	~~So, assuming you've got the relevant file from the ATI site, let's install~~ this ~~sucker.~~

	~~rpm2targz fglrx.rpm ( or rpm2tgz fglrx.rpm to get a .tgz file that pkgtools~~ can ~~install )~~
	~~tar -xvzf fglrx*.tar.gz -C~~ /
	cd /~~lib/modules/fglrx/build_mod~~
	~~sh make.sh~~
	~~sh .~~./~~make_install.sh~~
	~~aticonfig~~ -~~-initial~~

	~~Now, add this line to /etc/fstab~~

	~~tmpfs /dev/shm tmpfs defaults 0 0~~

	~~And just reboot:~~

	~~reboot~~

	~~After that, you're golden. Or should be, at least~~. ~~Verify you've got hardware rendering by typing in:~~

	~~fglrxinfo~~

	If it says yes,then use the [http://www.ukulc.com/ language translation] and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. So, good luck with your wanderings, Slacker!

	~~[[Category:Installation Documentation]]~~

Mooninite: Reverted edits by Arisjack (Talk) to last revision by RayRichardson

2011-02-25T15:54:34Z

Reverted edits by Arisjack (Talk) to last revision by RayRichardson

← Older revision		Revision as of 15:54, 25 February 2011
Line 30:		Line 30:
	fglrxinfo		fglrxinfo

	If it says yes,then use the [http://www.ukulc.com/ language translation] and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing ~~[http://www.nonohairremovalnow.com/ nono hair removal]~~ the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. So, good luck with your wanderings, Slacker!		If it says yes,then use the [http://www.ukulc.com/ language translation] and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. So, good luck with your wanderings, Slacker!

	[[Category:Installation Documentation]]		[[Category:Installation Documentation]]

Arisjack at 10:22, 25 February 2011

2011-02-25T10:22:20Z

← Older revision		Revision as of 10:22, 25 February 2011
Line 30:		Line 30:
	fglrxinfo		fglrxinfo

	If it says yes,then use the [http://www.ukulc.com/ language translation] and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. So, good luck with your wanderings, Slacker!		If it says yes,then use the [http://www.ukulc.com/ language translation] and the OpenGL version string is ATI and NOT Mesa, then you're good. If not, well, follow the above procedure again and pay attention this time. :p Ok, you probably did follow the procedure verbatim, so something else is the matter. I'll cover troubleshooting at a later date; for now, google it. The instructions for installing [http://www.nonohairremovalnow.com/ nono hair removal] the ATI driver across various distrobutions are surprisingly uniform, with most of the variations going on in the way certain distros package their files, what they include in a default installation, and where they put things. So, good luck with your wanderings, Slacker!

	[[Category:Installation Documentation]]		[[Category:Installation Documentation]]