Difference between revisions of "Ubuntu Natty Installation Guide"
|Line 1:||Line 1:|
have the now it
= Updated Open Source Driver PPA's =
= Updated Open Source Driver PPA's =
Revision as of 13:12, 22 August 2011
I have been so bewidlered in the past but now it all makes sense!
Updated Open Source Driver PPA's
- "Ubuntu-X" : This PPA offers the latest stable releases of video driver-related components. Follow the instructions at: https://launchpad.net/~ubuntu-x-swat/+archive/x-updates
- Xorg-edgers: This bleeding-edge PPA offers video driver-related components straight from their code (git) repositories. Follow the instructions at: https://launchpad.net/~xorg-edgers/+archive/ppa
Installing Proprietary Drivers a.k.a. Catalyst/fglrx
- PLEASE READ FIRST!
Which cards are no longer supported by ATI? The ATI Radeon 9500-9800, Xpress200-1250, 690G, 740G, X300-X2500 (including Mobility RadeonHD 2300, since it is really a DirectX 9 part). See the complete list here. If your card is on that list, you are limited to open-source drivers on Ubuntu Lucid/10.04 (and later). If you really need the proprietary Catalyst/fglrx driver, you will have to use an older Linux distribution, such as Debian Lenny/5.0.x or Ubuntu Hardy/8.04.x.
|ATTENTION RADEON USERS|
NOTE: If you enter your card information on AMD/ATI's driver page, it will offer you the Catalyst 9-3 driver to download. However, the Catalyst 9-3 driver doesn't support X servers past 1.5, and it will not work with Natty! !!!SO BE CAREFUL!!! If you tried to install Catalyst on a system with one of these cards, see the 'Removing the Driver' section to restore the default/pre-installed drivers.
Restricted Drivers Manager
NOTE: You must have the restricted repository enabled in Applications -> Ubuntu Software Center -> Edit -> Software Sources... for this to work. You must also have the fglrx-modaliases and jockey-gtk (or jockey-kde for Kubuntu) packages installed. You will be limited to the drivers for your version of Ubuntu that Canonical deems stable. This may not give you the latest drivers, but should be safest. On Ubuntu Natty, this will install Catalyst 8.840, which is roughly equivalent to a prerelease of Catalyst 11-4. Go to the Additional Drivers Manager (System -> Administration -> Additional Drivers) and activate the "ATI/AMD proprietary FGLRX graphics driver" (or double-click the "available driver" notification icon). Ubuntu will then install and configure the driver for you.
Installing the drivers manually
I recommend copying and pasting the commands (do not include the leading '$') to ensure there are no typing mistakes and speed up the install process. Remember to use Ctrl + Shift + V or Shift + Insert to paste into the terminal (or go to the terminals menu, select edit and click paste).
Before you start
If you have previously attempted installing Catalyst, remove any leftover files by following the Removing the Driver section. Make sure universe and multiverse are enabled in your repository sources (System -> Administration -> Software Sources). or Applications->Ubuntu Software Center->Edit->Software sources->Other software: check canonical partners.
Install the prerequisite packages:
$ sudo apt-get install build-essential cdbs fakeroot dh-make debhelper debconf libstdc++6 dkms libqtgui4 wget execstack libelfg0 dh-modaliases
If you are using the x86_64 architecture (64 bit), be sure to install "ia32-libs" before proceeding!
$ sudo apt-get install ia32-libs
Download the latest Catalyst package.
This package contains both the 32-bit and 64-bit driver.
$ cd ~/; mkdir catalyst15.12; cd catalyst15.12/ $ wget http://www2.ati.com/drivers/linux/ati-driver-installer-15-12-x86.x86_64.run $ chmod +x ati-driver-installer-15-12-x86.x86_64.run
Phenomenal breakdown of the topic, you shluod write for me too!
$ sudo dpkg -i fglrx*.deb
Generate a new /etc/X11/xorg.conf file
Unfortunately, there is no sure way to generate the ATI version of the Xorg.conf file. It is entirely dependent on your configuration. The following subsections will attempt to address possible (and tested) variations for their respective configurations.
This will work for most people:
$ sudo aticonfig --initial -f
A very basic /etc/X11/xorg.conf file might be what you need if you have a new card that's not fully supported by aticonfig. Here follows the entirety of a minimal xorg.conf file for the Radeon 6870:
Section "Device" Identifier "ATI radeon 6870" Driver "fglrx" EndSection
X2/Dual GPU Cards
If you have an X2 card (e.g. 4870X2 or 5970), use... !!Do not use for two separate cards in crossfire!!
$ sudo aticonfig --initial -f --adapter=all
If you have a dual monitor display (also known as "Big Desktop"), use:
$ sudo aticonfig --initial -f $ sudo aticonfig --set-pcs-str="DDX,EnableRandR12,FALSE"
This was confirmed in http://phoronix.com/forums/showthread.php?t=18553.
Force use of the new xorg.conf (if necessary)
Some people find that changes to xorg.conf don't get used by the driver. To force the ATI driver to adopt changes made to xorg.conf, use the following command:
$ sudo aticonfig --input=/etc/X11/xorg.conf --tls=1
Test your installation
NOTE: if you don't reboot first, fglrxinfo gives an error message. Reboot the computer and type
into the terminal. If the vendor string contains ATI, you have installed the driver successfully. Using fglrxinfo on a system with Catalyst 11-4 and a RadeonHD 4250 returns:
display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 4200 Series (This line may be different depending on what graphics card you are using.) OpenGL version string: 3.3.10665 Compatibility Profile Context (This line may be different depending on what graphics card and Catalyst version you are using.)
If you experience issues or a hang, you may need to disable fast TLS.
$ sudo aticonfig --tls=0
Just in case
Write down or remember this series of Alt+PrntScr key combinations, just in case your screen should go black and Ctrl+Alt+F1 and Ctrl+Alt+Backspace doesn't work.
Alt+PrntScr+r, Alt+PrntScr+s, Alt+PrntScr+e, Alt+PrntScr+i, Alt+PrntScr+n, Alt+PrntScr+u, Alt+PrntScr+b
These key-presses will reboot the system safely. To remember the key-presses, remember this nonsensical phrase: "Raising Skinny Elephants Is Never Utterly Boring".
An alternative would be to hold down Ctrl+Alt+SysRq (SysRq is usually the same key as PrintScreen) and type very slowly R E I S U B. A way to remember this is by inverting the word: "BUSIER" or remembering a phrase: "Restart Even If System Utterly Broken". This would also safely shutdown the system.
Hardware Video Decode Acceleration (EXPERIMENTAL)
This is confirmed to work for newer RadeonHD GPU's (those with UVD2). If you have a RadeonHD 4000 series or newer, you have UVD2. To see the complete list: http://en.wikipedia.org/wiki/Unified_Video_Decoder#UVD_enabled_GPUs
For acceleration to work, you will need libva from this PPA: https://launchpad.net/~dtl131/+archive/catalysthacks and the xvba va-api backend from: http://www.splitted-desktop.com/~gbeauchesne/xvba-video/ With those installed, you can get acceleration from any video player that uses VA-API. A compatible version of VLC is available in the aforementioned PPA.
DO NOT try to install a new version over an old one. Follow the 'Removing Catalyst/fglrx' section below to remove your existing driver, and then you can start at 'Downloading the latest Catalyst' to install the new one.
The uninstall script in the first command will only exist if you downloaded the drivers and installed the directly (rather than building packages as this guide does). Skip the first command if it does not exist.
$ sudo sh /usr/share/ati/fglrx-uninstall.sh $ sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev* xorg-driver-fglrx
If you plan on using open-source drivers, you will need to reinstall some packages because Catalyst overwrites or diverts some key 3D libraries with proprietary versions. For more information on this issue, see this Ubuntu wiki page
$ sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon $ sudo apt-get install xserver-xorg-video-ati $ sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core $ sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup
Build Fails and Log Shows "mixed implicit and normal rules. Stop."
If the installation fails and you find the above message in /var/lib/dkms/fglrx/8.841/build/make.log, it may be because you're using a pentium-build wrapper around gcc. See what the following ls command returns:
$ ls -la /usr/bin/gcc
If it shows that gcc is a link to builder-cc, temporarily redirect the link to point to the real gcc (gcc-4.5 in Ubuntu Natty). This should allow you to install fglrx:
$ sudo ln -sf /usr/bin/gcc-4.5 /usr/bin/gcc
When you're finished installing the driver, return the gcc link to its original value:
$ sudo ln -sf /usr/bin/builder-cc /usr/bin/gcc
Launchpad link for this bug: https://bugs.launchpad.net/ubuntu/+source/fglrx-installer/+bug/555957
"Errors were encountered while processing: fglrx-amdcccle" (on 64-bit systems)
Most likely, you probably did not have the "ia32-libs" package installed beforehand. If you have a 64 bit install, the above dpkg command may complain that "Errors were encountered while processing: fglrx-amdcccle". This is because of a dependency of the amdccle package on 32 bit libraries. If you receive this error, use the following command, which will force the installation of all of the 32 bit dependencies, and then the amdcccle package:
$ sudo apt-get -f install
Catalyst 15.12 on 64-bit systems may require the --force-overwrite command in the above dpkg command:
$ sudo dpkg -i --force-overwrite fglrx*.deb
Problems Starting Xserver
If you get a black screen hang, the first thing to check is if xorg.conf is the problem.
You can disable the xorg.conf with:
$ sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.disabled
Reboot and check to see if things work now.
You can reinstate the file with:
$ sudo mv /etc/X11/xorg.conf.disabled /etc/X11/xorg.conf
Before tweaking ACPI settings, try ensuring /dev/null is chmodded to 0666. This intermittently changes when using the nano (and possibly other) editors with sudo and the group/world permissions are unset. This leads to the ATI drivers hanging on boot or otherwise. A quick and dirty init script saved as /etc/init/chmodnull does the trick for me -
$ start on filesystem $ $ script $ chmod 0666 /dev/null $ chmod 0666 /lib/udev/devices/null $ end script
This has been tested using Ubuntu 10.04 64-bit on a ATI Radeon HD 4830 (HP Envy 15-1060ea). It's worth noting that I had to disable TLS (aticonfig --tls=0) to get things to stay stable!
If you've properly installed the driver, but experience problems when starting the X server, such as hanging, black/white/gray screen, distortion, etc., your system BIOS may have a buggy ACPI implementation. To work around, press Ctrl+Alt+F1 to get to a terminal (or failing that, boot to recovery mode) and run:
$ sudo aticonfig --acpi-services=off
If this method works, you should consider checking your system vendor's BIOS changelogs for relevant ACPI fixes, updating your BIOS, and reenabling the driver's ACPI services.
It's about time smoonee wrote about this.
Unsupported Hardware Watermark
This can happen if your card's PCI ID wasn't officially certified to work with a particular version of Catalyst. It does not necessarily mean that your card is unsupported, but it does mean that you shouldn't file bugs with that particular card/driver combination. If you installed the driver by downloading it from AMD/ATI, installing a newer version of Catalyst will probably help.
If you installed the proprietary driver included with Ubuntu or you do not want to upgrade to a newer version, it may be possible to work around the issue by using a control file from a newer version of Catalyst than the one you're running.
$ cd ~/; mkdir catalyst15.12; cd catalyst15.12/ $ wget http://www2.ati.com/drivers/linux/ati-driver-installer-15-12-x86.x86_64.run $ chmod +x ati-driver-installer-15-12-x86.x86_64.run $ sh ati-driver-installer-15-12-x86.x86_64.run --extract driver $ sudo mv /etc/ati/control ~/control.bak $ sudo cp driver/common/etc/ati/control /etc/ati
Always the best content from these prodigouis writers.
Suspend hibernation works with the latest driver.
For Radeon 3200, to wake up from suspend, I had to add the following lines to /etc/X11/xorg.conf: (This settings is not good option, if you are using compiz-fusion or any other transparency-based thingie. Not working for HD 3850)
Section "Extensions" Option "Composite" "Disable" EndSection Section "ServerFlags" Option "AIGLX" "off" EndSection
Another way to get it working is to do enable Composite, but when you want to suspend simply disable Compiz Fusion. How would you do that? Easy! Install the fusion-icon package (in repos by default):
$ sudo apt-get install fusion-icon
After you have done that, launch it (Applications > System > Compiz Fusion Icon) and it appears in your notification area. To switch, simply right-mouse click on the icon and select Metacity. Your desktop will flicker and windows will dissapear, but after a while they appear again. Now try to suspend.
When you wake up again, you can (hopefully) unlock your screen and there you go! Now you want Compiz back again, so right-mouse-click on the Compiz Fusion Icon and select Compiz again. Desktop flickering again, but then voila! Your Compiz Fusion Desktop is back again! (At least, that is how it is supposed to work)
KNOWN PROBLEM: When you switch back, all your windows are on the same desktop. This happens because you switched to metacity.
Hopefully this helped some people, as it did for me! Solution posted by firstname.lastname@example.org
Can't remove fglrx with dpkg (diversion issue)
If dpkg refuses to remove an fglrx package and complains about a diversion of a file, you might need to manually remove it. For example, if dpkg complains:
dpkg-divert: mismatch on divert-to when removing `diversion of /usr/lib/libGL.so.1.2 to /usr/share/fglrx/diversions/libGL.so.1.2 by xorg-driver-fglrx' found `diversion of /usr/lib/libGL.so.1.2 to /usr/lib/fglrx/libGL.so.1.2.xlibmesa by xorg-driver-fglrx'
$ sudo dpkg-divert --remove /usr/lib/libGL.so.1.2
This module/version combo is already installed
If you get this error-message, simply uninstall the previous version before installing the new one with:
$ sudo dkms remove -m fglrx --all
New kernel installed?
In theory, DKMS should automatically install the fglrx kernel module for your new kernel the first time you boot it. Should you need to manually install it:
$ sudo dkms build -m fglrx -k `uname -r` $ sudo dkms install -m fglrx -k `uname -r`
if amdcccle doesn't work and says Identifier is not a valid word. Use lower case letter in xorg.conf
Aticonfig not found after installation & "module does not exist" after boot
This scenario is possible when the driver installation has seemingly succeeded and is possibly related to previous use of fglrx through the Jockey (i.e. you first used drivers provided by Ubuntu but then upgraded to ones available from AMD's website). When doing aticonfig --initial after driver installation, you might end up not having the aticonfig available at all:
aticonfig: command not found
After booting you might receive X error '(EE) Failed to load module "fglrx" (module does not exist, 0)'. These do not necessarily indicate that the installation has failed completely. On command line, do
$ ls /usr/lib/fglrx/bin
and see if the command lists some Ati related programs. If they are listed but not found from /usr/bin, it is possible that the "update-alternatives" fglrx .deb installation does has been ignored. See man update-alternatives for more information about the concept and workings of alternatives. In practice, update-alternatives is supposed to create several symbolic links to the files in the fglrx directory, but it will be ignored if the alternatives for the very related gl_conf entry has been set to manual. Do
$ update-alternatives --get-selections | grep gl_conf
and see if the mode is manual instead of auto and if mesa is mentioned instead of fglrx in the path that is printed. In this case you need to
$ sudo update-alternatives --set gl_conf /usr/lib/fglrx/ld.so.conf
to set fglrx as the active alternative. You can alternatively (no pun intended) and additionally change the gl_conf into automatic mode before the installation this way:
$ sudo update-alternatives --auto gl_conf
After that, the alternatives should automatically be configured correctly when the graphics driver .debs are installed.
Wham bam thank you, ma'am, my qsuetinos are answered!
'Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507.' during deb generation
During installation you may receive the following message:
Can't exec "debian/rules": Permission denied at /usr/bin/dpkg-buildpackage line 507.
This can happen when your /tmp folder is mounted with the option "noexec". The noexec is suggested by many howtos regarding Ubuntu on SSD, when placing the /tmp in memory. A workaround can be found here: