Troubleshooting: Difference between revisions

From cchtml.com
(adding info from Ubuntu guide)
No edit summary
Line 18: Line 18:
blast continuously. There is no known fix as of driver 8.31.05 or previous. Open source
blast continuously. There is no known fix as of driver 8.31.05 or previous. Open source
"radeon" driver does not exhibit this problem.
"radeon" driver does not exhibit this problem.
=== nForce 3 AGP Issues ===
For nForce3 based motherboards: if the install seems to go well, but fglrx still fails and $ fglrxinfo tells you you're still running Mesa, there may be a problem with the nVidia AGP-PCI Bridge module's compatibility with your BIOS (or vice versa, I haven't yet investigated). (Confirmed at least for ASUS K8N-E Deluxe.) A solution is to downgrade your BIOS to a previous version (see your motherboard manual/manufacturer's website for instructions). Here is a list of compatible BIOS versions (if your model is not listed here and you find a version that fixes the problem, please add it to the list so others can benefit):
*ASUS
**K8N-E Deluxe: Version 1006


[[Category:Installation Documentation]]
[[Category:Installation Documentation]]

Revision as of 19:36, 29 December 2006

General Troubleshooting process.

If something goes wrong, cry.

System lockup on logout or switch to virtual consoles

If your system locks up after you logout or when you try to switch to a virtual console, this might be an instance of this bug. It is likely that the problem only occurs for users with an Xorg version of at least 7.0 and an amd64 system. Probably it only affects users of DVI.

There is a workaround: Use a standard D-Sub VGA connector instead of the DVI connector.

This workaround was posted as a comment to another related bug: see here.


X800/X850 fan is very loud / constantly works

It seems fglrx has a bug with all X800/X850 cards causing them to heat up excessively even when not in 3D mode. This behaviour will cause the cards' fans to function on full blast continuously. There is no known fix as of driver 8.31.05 or previous. Open source "radeon" driver does not exhibit this problem.


nForce 3 AGP Issues

For nForce3 based motherboards: if the install seems to go well, but fglrx still fails and $ fglrxinfo tells you you're still running Mesa, there may be a problem with the nVidia AGP-PCI Bridge module's compatibility with your BIOS (or vice versa, I haven't yet investigated). (Confirmed at least for ASUS K8N-E Deluxe.) A solution is to downgrade your BIOS to a previous version (see your motherboard manual/manufacturer's website for instructions). Here is a list of compatible BIOS versions (if your model is not listed here and you find a version that fixes the problem, please add it to the list so others can benefit):

  • ASUS
    • K8N-E Deluxe: Version 1006


Distribution Neutral Steps

Verifying | Configuring | Troubleshooting