HP: Difference between revisions
From cchtml.com
Line 51: | Line 51: | ||
| XPRESS 200M 5955 | | XPRESS 200M 5955 | ||
|Works | |Works | ||
| | |Fedora 7 | ||
|Driver 8.24.8 is known to work, 8.25.18 and 8.26.18 are broken. You have to enable Sideport UMA and assign 128MB of memory as the chipset always reports it is equipped with 256MB no matter what you configure it to. Driver 8.40.4 works, but cannot suspend to ram or hibernate. | |Driver 8.24.8 is known to work, 8.25.18 and 8.26.18 are broken. You have to enable Sideport UMA and assign 128MB of memory as the chipset always reports it is equipped with 256MB no matter what you configure it to. Driver 8.40.4 works, but cannot suspend to ram or hibernate. | ||
|- | |- |
Revision as of 01:58, 5 September 2007
Workstation
Model | Graphics | Status | Distributions | Notes |
---|---|---|---|---|
xw4200 Workstation | FireGL V3100, FireGL V5100 | Works | ||
xw6200 Workstation | FireGL V3100, FireGL V5100 | Works | ||
xw8200 Workstation | FireGL V3100, FireGL V5100 | Works |
Desktops
Model | Graphics | Status | Distributions | Notes |
---|---|---|---|---|
HP A1629.uk Pavilion | ATI Radeon Xpress 200 | Works |
Laptops
Model | Graphics | Status | Distributions | Notes |
---|---|---|---|---|
Pavilion L2005cu | XPRESS 200M | Works | ||
Pavilion zv6000 | XPRESS 200M 5955 | Works | Fedora 7 | Driver 8.24.8 is known to work, 8.25.18 and 8.26.18 are broken. You have to enable Sideport UMA and assign 128MB of memory as the chipset always reports it is equipped with 256MB no matter what you configure it to. Driver 8.40.4 works, but cannot suspend to ram or hibernate. |
Special Edition L2000 | XPRESS 200M 5955 | Works | ||
Compaq nx8220 | Ati X600 | Works | ||
HP nw8240 | FireGL v5000 | Works* | Tested under SuSE Factory with xorg 7.2, fglrx module/driver v8.35.5 patched to build with kernel 2.6.20 -- still can't get suspend-to-ram (s3) to work properly. OpenGL acceleration works fine at 1920x1600px but Google Earth caused a system hang, which I'll try to fix using fglrx v8.36 and changing settings with Catalyst. | |
HP nc6400 | Ati X1300 | Works | Gentoo | Tested under xorg 7.1 with xgl/beryl |
HP nc8230 | Radeon Mobility X600 | Works | Debian/GNU unstable | Tested under Debian/GNU unstable under xorg 7.2-5, kernel 2.6.18-3-686-bigmem and running the ATI-supplied installation package v8.38.6. Works fine, haven't verified TV-out et al, but running dual x-servers (dual-head with diffrent resolutions) works fine. |
HP nw8440 | Radeon Mobility X1600 | Works | Ubuntu 7.04 |