Mandriva: Difference between revisions

Revision as of 17:23, 25 February 2006

ATI drivers are included in commercial release. Following instructions concern installation on the free release.

First of all, you have to install kernel sources :

$ su
# urpmi kernel-source

Then, download ati installer and launch it :

# chmod +x ati-driver-installer-X.X.X.run
# ./ati-driver-installer-X.X.X.run

Follow the instructions.

Use aticonfig. Consult help with aticonfig -h.

Reboot.

Note: Thats are not Official Mandriva fglrx RPMS, it works perfekt on my machine.

First you must add PLF non-free repository. Use | easyurpmi for example.

Then, install the driver with this command.

# urpmi ati-xorg dkms-ati

You can now choose fglrx driver for your card with the Mandriva drakx11 tool

# drakx11

@@ Line 23: / Line 23: @@
 Reboot.
-== Installation with Mandriva 2006 RPM Packages ==
+== Installation with Mandriva 2006 PLF Packages ==
 Note: Thats are not Official Mandriva fglrx RPMS, it works perfekt on my machine.
-First you must add or Download the RPMS for Mandriva 2006.
+First you must add PLF non-free repository. Use [http://easyurpmi.zarb.org | easyurpmi] for example.
-List:
+Then, install the driver with this command.
 <pre>
-dkms-fglrx-8.19.10-1.2006.Tux3D.i586.rpm
+# urpmi ati-xorg dkms-ati
-fglrx_GLX-8.19.10-1.2006.Tux3D.i586.rpm
-fglrx-tools-8.19.10-1.2006.Tux3D.i586.rpm
-fglrx-devel-8.19.10-1.2006.Tux3D.i586.rpm
 </pre>
-Type this in your Root shell to add the responsity.
+You can now choose fglrx driver for your card with the Mandriva drakx11 tool
 <pre>
-urpmi.addmedia Tux3D http://www.tux3d.org/fglrx/Mandriva/2006/i586/ with hdlist.cz
+# drakx11
 </pre>
-Now Installing the driver with this command.
-<pre>
-urpmi fglrx-tools
-</pre>
-You can Configure the driver with these Alternatives
-<pre>
-fglrxconfig
-</pre>
-The Mandriva DrakX tool
-<pre>
-DrakX
-</pre>
-[http://www.tux3d.org/ Have Fun ;-)]
-Greetz SmOkyS
 [[Category:Distributions]]