Ubuntu Installation Guide

Ubuntu 5.10 (Breezy Badger)

Method 1: Installing Breezy's Included Driver (8.16.20)

The fglrx driver supports Radeon 8500+ and the X-series cards (see release notes). When running the dpkg-reconfigure commands you can accept the defaults whenever you aren't sure.

Installing the driver

All Platforms:

sudo apt-get install xorg-driver-fglrx
sudo apt-get install linux-restricted-modules-$(uname -r) #Okay if it is already installed
sudo dpkg-reconfigure xserver-xorg #Select the fglrx driver and 64-bit users should deselect int10a

64-bit users:

You have to downgrade to an older version of libdri.a due to an incompatilbity with the ATI drivers. Download it here

Change to download directory:

gunzip libdri.a.gz
sudo cp /usr/X11R6/lib/modules/extensions/libdri.a libdri.a.old
sudo cp libdri.a /usr/X11R6/lib/modules/extensions/

If you wish to revert to any non-fglrx driver you will need to copy the libdri.a.old file back over the fglrx version.

All platforms: Ctrl-Alt-Backspace to restart your desktop.

Confirm that it works

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 1.3.5272 (X4.3.0-8.16.20)

Troubleshooting

If you have a widescreen LCD display that is stuck at 1024x768 then it is probably the bug in the 8.16.20 driver that was fixed in 8.18.X (see the next section).

The output of dmesg | grep fglrx and /var/log/Xorg.0.log are most useful when looking for errors.

Method 2: Generating/Installing Ubuntu packages for the newer 8.22.5 drivers in Breezy Badger

Important Warning: Installation of this driver requires removing the restricted-modules package in order to work. That package includes drivers for madwifi (Atheros wireless cards), nvidia cards, and a handful of other devices. I provide a work-around for the madwifi drivers, but you need to perform it before removing the restricted modules (jump to end of this this post).

When running the dpkg-reconfigure command you should answer the questions that you know and take the defaults for the rest. You might want to say no to the monitor detection--it has caused X-Windows to crash for some people.

Remove existing fglrx driver

Remove Breezy's included drivers if they are installed:

sudo apt-get remove xorg-driver-fglrx
sudo apt-get remove fglrx-control
sudo apt-get remove linux-restricted-modules-$(uname -r)
sudo dpkg-reconfigure xserver-xorg #select the "ati" module

Reboot.

Installing the new driver

Download the ATI driver installer: Click here

Change to the download directory. Make sure that you have the universe and multiverse repositories enabled in /etc/apt/sources.list before doing these steps. Sample sources.list.

Install necessary tools:

sudo apt-get install gcc-3.4 module-assistant build-essential 
sudo apt-get install fakeroot dh-make debconf libstdc++5 gcc-3.3-base

Create .deb packages:

chmod +x ati-driver-installer-8.22.5-i386.run
LANG=C LC_ALL=C ./ati-driver-installer-8.22.5-i386.run --buildpkg Ubuntu/breezy

Install .deb packages:

sudo dpkg -i xorg-driver-fglrx_8.22.5-1_i386.deb
sudo dpkg -i fglrx-control_8.22.5-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.22.5-1_i386.deb

Compile the kernel driver:

Remove any old fglrx deb's from /usr/src/

sudo rm /usr/src/fglrx-kernel*.deb

sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant a-i fglrx

Update the xorg.conf file:

sudo aticonfig --initial

Ctrl-Alt-Backspace to restart your session.

Confirm that it worked

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.5642 (8.22.5)

Troubleshooting

General

Look for error messages in /var/log/Xorg.0.log and kern.log.

AGPgart

Some Mainboards (e.g. Boards using nforce2) are not supported by the agpgart included in fglrx. In this case you need to tell the driver to use the kernel's agpgart:

sudo aticonfig --internal-agp=off

Then Ctrl-Alt-Backspace to restart your session.

Madwifi Drivers in Breezy Badger

In order to continue using the madwifi driver you can do the following before removing the linux-restricted-modules package and rebooting.

sudo cp /lib/modules/$(uname -r)/volatile/ath_hal.ko /lib/modules/$(uname -r)/kernel/
sudo depmod -a $(uname -r)

Ubuntu 6.04 (Dapper Drake)

Generating/Installing Ubuntu packages for the newer 8.22.5 drivers in Ubuntu Dapper

Important Change: Installation of this driver no longer requires removing the linux-restricted-modules package in order to work. There is a new blacklist feature in Ubuntu Dapper that you can use to go around this.

When running the dpkg-reconfigure command you should answer the questions that you know and take the defaults for the rest. You might want to say no to the monitor detection--it has caused X-Windows to crash for some people.

Remove existing fglrx driver

Enable a blacklist for linux-restricted-modules

sudo gedit /etc/default/linux-restricted-modules-common

Edit DISABLED_MODULES to include fglrx

Remove Dapper's included drivers if they are installed:

sudo apt-get remove xorg-driver-fglrx
sudo apt-get remove fglrx-control
sudo dpkg-reconfigure xserver-xorg #select the "ati" module

Reboot.

Installing the new driver

Download the ATI driver installer: Click here

Change to the download directory. Make sure that you have the universe and multiverse repositories enabled in /etc/apt/sources.list before doing these steps.

Install necessary tools:

sudo apt-get install gcc-3.4 module-assistant build-essential 
sudo apt-get install fakeroot dh-make debconf libstdc++5 gcc-3.3-base

Create .deb packages:

chmod +x ati-driver-installer-8.22.5-i386.run
LANG=C LC_ALL=C ./ati-driver-installer-8.22.5-i386.run --buildpkg Ubuntu/dapper

Install .deb packages:

sudo dpkg -i xorg-driver-fglrx_8.22.5-1_i386.deb
sudo dpkg -i fglrx-control_8.22.5-1_i386.deb
sudo dpkg -i fglrx-kernel-source_8.22.5-1_i386.deb

Compile the kernel driver:

Remove any old fglrx deb's from /usr/src/

sudo rm /usr/src/fglrx-kernel*.deb

sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant a-i fglrx

Note: If sudo module-assistant a-i fglrx doesn't work then run the following:

sudo dpkg -i fglrx-kernel-source_8.22.5-1_i386.deb
sudo module-assistant build,install fglrx

This is because the current fglrx kernel source package in Dapper is broken yet marked "newer" than the one created by the ATI Installer.

Update the xorg.conf file:

sudo aticonfig --initial

Ctrl-Alt-Backspace to restart your session.

Confirm that it worked

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9700 Generic
OpenGL version string: 2.0.5642 (8.22.5)

Troubleshooting

General

Look for error messages in /var/log/Xorg.0.log and kern.log.

AGPgart

Some Mainboards (e.g. Boards using nforce2) are not supported by the agpgart included in fglrx. In this case you need to tell the driver to use the kernel's agpgart:

sudo aticonfig --internal-agp=off

Then Ctrl-Alt-Backspace to restart your session.