Debian Installation Guide

From cchtml.com

As of November 2005, ATI's drivers are in the non-free area of Debian. Make sure your /etc/apt/sources.list contains "contrib non-free" as well as main. You will, however, have to build your own kernel modules.

Which install method?

There are two methods that can be used to install the fglrx driver in Debian. The first, and recommended way is to use the native Debian packages directly from the non-free repository. The second, which may be required for newly release drivers, is to generate the Debian packages directly from the ATI installer. Both methods are documented here. After the packages are installed, the remaining steps are common, regardless of the install method chosen.

Method 1: Installing from Debian non-free

Install the driver

sudo apt-get update
sudo apt-get install module-assistant fglrx-driver fglrx-kernel-src

Method 2: Generating/Installing Debian packages from the ATI installer

Download the ATI driver installer

Download the driver packages directly from ATI. You need to download the ATI installer, not the RPM packages for this method to work.

Build the Debian packages

Change to the download directory.

sudo apt-get install module-assistant build-essential fakeroot dh-make debconf
sudo sh ./ati-driver-installer-8.24.8-i386.run --buildpkg Debian/sarge (or sid, etch, etc.)

This should create 5 .deb packages in the current directory. If this step succeeded without any errors but there are no packages, check the /tmp directory.

Install the driver

You might get some errors regarding dependencies during the dpkg process. You can ignore them since they should be resolved when you run the upgrade step.

sudo dpkg -i fglrx-control-qt3_8.24.8-1_i386.deb
sudo dpkg -i fglrx-kernel-src_8.24.8-1_i386.deb
sudo dpkg -i fglrx-driver-dev_8.24.8-1_i386.deb
sudo apt-get -f upgrade

A cruder way would be just calling

 dpkg -i fglrx-*.deb 

Compile the kernel driver

sudo module-assistant prepare
sudo module-assistant update
sudo module-assistant a-i fglrx

Observed error messages

                     |  dh_testdir                                                                │
                     │ /usr/bin/make -C /lib/modules/2.6.11/source SUBDIRS=/usr/src/modules/fglrx │
                     │ /bin/sh: /usr/src/linux-2.6.11/scripts/gcc-version.sh: Datei oder Verzeich │
                     │ make[1]: Entering directory `/usr/src/linux-2.6.11'                        │
                     │ make[2]: scripts/Makefile.build: Datei oder Verzeichnis nicht gefunden     │
                     │ make[2]: *** Keine Regel, um »scripts/Makefile.build« zu erstellen.  Schlu │
                     │ make[1]: *** [_module_/usr/src/modules/fglrx] Fehler 2                     │
                     │ make[1]: Leaving directory `/usr/src/linux-2.6.11'                         │
                     │ make: *** [build] Fehler 2                     

Update the xorg.conf file

sudo aticonfig --initial

Now restart X, or reboot for the driver changes to take effect.

Confirm that it worked

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: MOBILITY RADEON 9700 Generic
OpenGL version string: 1.3.5461 (X4.3.0-8.19.10)