Fedora 16 Installation Guide
Please consider
The free radeon driver is making real progress in F16's kernel 3.1 and 3.2, it's expected to get even better in kernel 3.3 and 3.4.
The kernel 3.1 driver will easily run desktop compositing (eg: gnome-shell, transparent terminal). It even manages 60fps VSync at 1920x1200 in many 3D games (eg: Darkplaces Quake engine) with no problems. Depending on your CPU, constant 45fps in 1080p Minecraft is easily doable.
Please test your requirements and consider using the Free Software radeon driver before installing ATI's non-Free proprietary flgrx driver.
Pre-built packages from RPMFusion
RECOMMENDED METHOD
This is easier than manually building the driver from AMD as you don't need to worry about passing kernel options via GRUB2, configuring DKMS, rebuilding the kernel module every time you do a kernel upgrade, or cleaning up any mess if you want to remove the driver.
Clean up previous AMD-supplied driver installation
If you're coming from the AMD-supplied driver to RPMFusion's driver, you'll need to reinstall this package as the AMD driver installation changes files it contains.
su - yum reinstall mesa-libGL
Setup RPMFusion
There are instructions on http://www.rpmfusion.org/ but this should do it.
su - rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Install Catalyst driver packages
This procedure is the same for 32-bit and 64-bit, yum will automatically install the correct driver and libs for your architecture.
su - yum install akmod-catalyst xorg-x11-drv-catalyst xorg-x11-drv-catalyst-libs
Kernel module packages
Note that there are individual kmod-catalyst- packages which supply kernel modules for specific Fedora kernel versions. If you are using these and you upgrade the kernel without upgrading the kmod-catalyst- package, loading the proprietary driver will fail and you'll revert back to the free radeon graphics driver. Sometimes there is a day or so between Fedora upgrading their kernel and RPMFusion building a new kmod package.
The akmod-catalyst package we installed above automatically builds a new kernel module at boot-time when the kernel is upgraded, so you never have to worry about this.
Official AMD Driver
Requirements
At F16's release, the ATI driver did not support the version of X.Org that Fedora shipped with. This has been resolved in Catalyst 11.11 onwards. You will need version 11.11 of the ATI driver or later for F16, earlier versions will not work.
Preinstall required packages
The script from AMD builds a kernel module which loads AMD's proprietary binary blob, so we're going to install some development packages.
su - yum install kernel-devel kernel-headers gcc gcc-c++
If you're on 64-bit you may also have to install this package too. (you need this for 64-bit nVidia drivers so I had it installed anyway, could someone please confirm/deny this requirement?)
su -c yum install glibc-devel
Download driver
Download the appropriate driver from http://support.amd.com/
It will be called something like ati-driver-installer-version.run.
Install driver
Run the file as root in the sh shell.
su - chmod +x ati-driver-installer-version.run sh ./ati-driver-installer-version.run
Select the default install, do not generate distribution packages.
Confirming Installation
Check the build install log.
tail /usr/share/ati/fglrx-install.log
You should see data confirming the module build worked.
build succeeded with return value 0 duplicating results into driver repository... done.
Generate a new xorg.conf
This should do fine for most people.
su - aticonfig --initial -f
If you have multiple monitors or X2 cards then you'll need to do some other stuff. Try man aticonfig, read the Catalyst documentation, or check one of the Ubuntu guides for the correct syntax.
Uninstalling AMD-supplied driver
Run AMD's uninstall script.
su - sh /usr/share/ati/amd-uninstall.sh
Reinstall this package as the AMD driver installation changes files it contains.
su - yum reinstall mesa-libGL
Notice
Some users reported that the first method (rpmfusion pre-built packages) don't work and cause a black screen or corrupted video signal. You can solve the problem this way: Turn on your computer, in Grub screen press E and in command line add at the bottom
radeon.modeset=0 blacklist=radeon 3
This will turn off the Radeon drivers. Log in normally. Then open Add/Remove software and search 'catalyst'. Remove the Catalyst drivers installed. Then re-open Add/Remove software and look again for 'catalyst'. This time select the latest catalyst kernel module(s) avalaible and 'AMD's proprietary driver for ATI graphics cards'
