Gentoo Installation Guide
Orginally found on the Gentoo Wiki, the GNU Free Documentation license allows me to copy/paste it here.
tickets_3.txt;2;2
tickets_4.txt;2;2
Grabbing a Driver Set
For installation it will be easier to drop out of X to a command prompt. Do this using whatever command your Window Manager uses. I use fluxbox so it's just rightclick -> fluxbox menu -> exit. For KDE or GNOME it's probably just a matter of logging out. When all else fails, hit CTL+ALT+BACKSPACE to kill the X server ungracefully. If the X server only reboots or for some reason you've disabled this hotkey, log in as root and type init 3 to bring the system run level down.
There is also the possibility to stop the xdm service by entering /etc/init.d/xdm stop as root.
Thanks to portage, installing the drivers is easy. If you have not already done it recently, start by synchronising your portage tree:
emerge --sync
Getting the latest drivers will probably mean unmasking them.
echo "x11-drivers/ati-drivers ~arch" >> /etc/portage/package.keywords echo "x11-drivers/ati-drivers-extra ~arch" >> /etc/portage/package.keywords
Replace <~arch> with your system architecture; it's going to be either ~x86 or ~amd64, the only two CPU architectures supported by the ATI driver.
Now let's install the drivers. ati-drivers-extra is a (god-awful) control panel for the driver you probably won't use; you can leave that part out if you want, but for completeness we mention it here.
su - emerge -av ati-drivers ati-drivers-extra
The next step is switch to the ATi OpenGL subsytem:
(#opengl-update ati) eselect opengl set ati (very important!)(opengl-update is deprecated)
Configure X: First, make a standard config file.
xorgconfig
For a single screen
aticonfig --initial --input=/etc/X11/xorg.conf
For a dual head, second screen is {left|right|above|below}
aticonfig --initial=dual-head --input=/etc/X11/xorg.conf --screen-layout={left|right|above|below}
Adapt input with your path to xorg's conf file
If for some reason this command doesn't work, then try manually executing from its default location:
/opt/ati/bin/aticonfig [...]
Now, let's get back into X.
startx
Open up a command prompt and run:
fglrxinfo
If the OpenGL vendor string says "ATI Technologies," then congrats! You've got the drivers working and hardware acceleration going great. If not...read on...
Troubleshooting
Config Files
By default, the driver uses the Internal AGPGART. Sometimes the internal one doesn't work, and you will have to use the one provided with the kernel. Search your xorg.conf for the line that has the option "UseInternalAGPGART." Simply change the "yes" to "no."
| File: xorg.conf |
Option "UseInternalAGPGART" "no" |
Now simply add the modules to /etc/modules.autoload.d/kernel-2.x where x is your kernel version.
Add the following (ORDER IS VERY IMPORTANT);
| File: /etc/modules.autoload.d/kernel-2.x |
agpgart intel-agp # change intel-agp to your chipset. eg: via-agp, nvidia-agp sis-agp. fglrx |
Finally, run
modules-update
Then you can reboot and everything should work. If you have are having problems, check dmesg and /var/log/Xorg.0.log for more info.
Blank screen or monitor turning off after startx
Versions of ati-drivers >= 8.16.20 have an issue with this that's easily corrected by inserting:
| File: xorg.conf |
Option "ForceMonitors" "notv" |
in the device section of xorg.conf (discussed here: http://bugs.gentoo.org/show_bug.cgi?id=103028)
Check if you have a non-DDC monitor connected via VGA/HD15 connector. If so change your xorg.conf:
| File: xorg.conf |
# Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "NONE, CRT"
Option "IgnoreEDID" "off"
Option "HSync2" "30-85"
Option "VRefresh2" "50-160"
# Option "ScreenOverlap" "0"
|
where HSync2 and VRefresh2 are your monitor parameters.
Also, try changing the MonitorLayout option. The default is "AUTO, AUTO", which is to say X will attempt to autodetect what kind of monitor you've got on the first and second display heads. This can theoretically fail (though I have never observed it). Try changing it around a bit. For example, if you have an LCD and no secondary monitor, change the line to read:
| File: xorg.conf |
Option "MonitorLayout" "TMDS, NONE" |
if you have a CRT, simply replace "TMDS" with "CRT".
Crashes on startup
If you are unable to use any 3d applications and get this error instead:
FGLTexMgr: open of shared memory object failed (Function not implemented) __FGLTexMgrCreateObject: __FGLTexMgrSHMmalloc failed!!! fglX11AllocateManagedSurface: __FGLTexMgrCreateObject failed!! FGLTexMgr: open of shared memory object failed (Function not implemented) __FGLTexMgrCreateObject: __FGLTexMgrSHMmalloc failed!!! fglX11AllocateManagedSurface: __FGLTexMgrCreateObject failed!! FGLTexMgr: open of shared memory object failed (Function not implemented) __FGLTexMgrCreateObject: __FGLTexMgrSHMmalloc failed!!!
Then you do not have tmpfs mounted on /dev/shm, which the driver requires. Make yourself sure you have tmpfs support compiled into kernel. It's under
File systems -->
Pseudo filesystems -->
[*] Virtual memory file system support (former shm fs)
To mount this, add to following line to /etc/fstab (if it isn't there already):
| File: /etc/fstab |
tmpfs /dev/shm tmpfs defaults 0 0 |
Then just do a:
mount /dev/shm
If the drivers still crap out on you, or for example you get a black screen on X init, try going into your system BIOS and change graphics-related stuff around. Believe it or not, for me my 9800 gives a black screen on X init if I have the AGP Aperture set at anything other than 128MB. I don't know what causes this, and I don't care; I'm just relating to you how I overcame my problem ;)
Also, whenever you update your compiler, you must recompile your kernel otherwise you won't be able to insert the fglrx module. Note that recompiling your kernel means you must also unmerge/emerge ati-drivers!
Duplicate symbol errors in X log
If you are unable to start X or X fails to load the fglrx driver and you have multiple symbol errors in your Xorg log, chances are that you have compiled X with the dlloader flag. This flag can not be used with the fglrx driver. To fix this problem, remove the dlloader flag by editing your /etc/portage/package.use file as follows:
| File: /etc/portage/package.use |
x11-base/xorg-x11 -dlloader |
Now re-emerge the xorg-x11 package and reinstall the fglrx driver.
Crashes on the exit of X.org / X won't shutdown
Perform the following if you can get the fglrx drivers working with hardware acceleration, but are suffering from a complete system crash when trying to quit X. You should boot into your system, login, then start on this. You don't need to boot into X, and shouldn't need to edit your xorg.conf file (as fglrx is already setup as the driver and working)
You've emerged the "stable" version of the ati-drivers, these are out of date -- remove them (emerge --unmerge ati-drivers), to add the most recent you should either add them to the keywords file (/etc/portage/package.keywords) or emerge your local ebuild (emerge /usr/portage/x11-drivers/ati-drivers/ati-drivers-8.22.5.ebuild) if you're told it requires a dependency, emerge the local e-build for that, then try again. (usually eselect-opengl is required.) Once you have the most recent ati-drivers emerged, run (eselect opengl set ati). Now you can (startx) and hopefully quit without any problems.
glxinfo says "error: failed to open DRM: Operation not permitted"
If a check with the glxinfo fails for ordinary users though works fine for root it might be related to filepermissions of the device-file. Here is how to solve it:
Make sure that the filepermissions on the card-device allows the video-group to read and write. The common group in gentoo with X is "video". All normal users should be part of this group. Also, the device must have permissions for this group to read and write the card-device.
Check the permissions on the card-device:
root:/#ls -lcF /dev/dri/card0 crw-rw---- 1 root root 226, 0 Oct 5 16:19 /dev/dri/card0
It can be changed with:
root:/dev/dri#chgrp video card0
Check if user is part of video:
paddlaren:~>id paddlaren uid=1000(paddlaren) gid=1000(paddlaren) groups=1000(paddlaren),10(wheel),11(floppy),18(audio),19(cdrom),80(cdrw),85(usb),100(users),35(games)
To add a user to the video-group:
root:~#gpasswd -a my_user video paddlaren:~>id paddlaren uid=1000(paddlaren) gid=1000(paddlaren) groups=1000(paddlaren),10(wheel),11(floppy),18(audio),19(cdrom),27(video),80(cdrw),85(usb),100(users),35(games)
Logoff and on to ensure that the membership of the group is known to the system.
See Also
- ATi Unofficial Bugzilla (occasionally monitored by ATi personnel)
- Check out user Wedge_'s excellent ATI Radeon FAQ here
