SUSE/openSUSE
General Status
- Native Installer Support contributed by Stefan Dirsch
- Repackaged by Flavio Stanchina
Installation
Method 1
- Install 'kernel-source' and C++ compiler ('gcc') and tools selection in yast.
- Get the rpm that matches the SuSE X server on your system (XFree86 4.3 or X.Org 6.8) instead of the ATI driver installer from [1]
- init 3
- install the driver package (e.g. rpm -Uvh fglrx64_6_8_0-8.24.8-1.x86_64.rpm)
- configure your X server using fglrxconfig
note: this is not the way described in the READMEs, but it's the way that worked best for me and others. Especially if sax and/or your X server crash when using the ATI driver installer's package (due to missing symbols in fglrx_drv.o)
GUIDE: ATI Installer HOWTO for SUSE/Novell users http://www.suse.de/~sndirsch/ati-installer-HOWTO.html
ANOTHER Installation Guide:
"3D Acceleration for ATI cards (works for SuSE, Mandriva and Debian)" at
linuxhelp.150m.com/ati/ati.htm
http://m.domaindlx.com/LinuxHelp/ati/ati.htm (mirror)
YET ANOTHER Installation Guide:
Generally following this guide should help most of you: http://linux.wordpress.com/2006/05/12/suse-101-ati-drivers-installation/
What follows is a slightly simplified version that I've used numerous times without fail.
1. BACKUP your current /etx/X11/xorg.conf file, preferably to your home directory. Now change to a command shell by hitting Ctrl-Alt-F1.
2. Remove any previous versions of the ATI driver by either
If you have installed a previous ATI driver version without using RPM packages (or if you don't know if you have or not), type the following:
cd /usr/share/ati sh ./fglrx-uninstall.sh
Otherwise, and even if you've done the above type the following,
rpm -e $(rpm -qa | grep fglrx)
3. Change the directory containing the downloaded ati-driver...run file.
4. Change the permissions of the driver file to executable by typing the following:
chmod +x ./ati-driver...
Use the tab button to complete the rest of the ati-driver... file name.
5. Create a SuSE RPM (info is for 32 bit version) from the file by typing
./ati-driver.(fillintheblanks).run --buildpkg SuSE/SUSE101-IA32
6. Install the created fglrx... file by typing
rpm -ivh fglrx_...(hit tab again to get full name)...
7. I've no idea what the following does, but you're recommended to run it:
ldconfig
8. Now run the ati config commands:
aticonfig --initial --input=etc/X11/xorg.conf
9. Now run the Sax2 setup.
sax2 -r -m 0=fglrx
You may wish to alter the refresh rates and DPI info with this, otherwise just hit save. DO NOT hit the test button, it regually crashes my machine when i do...
10. Reboot you machine. Do not use the reboot command, again this messes my machine up on the next boot for whatever reason... try
shutdown -h now
11. Boot up again, and check the new /etc/X11/xorg.conf file, compare it to your old one, and make any changes if you know what you're doing.
Resources
| Distribution Neutral Steps |
